[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Boradcom bcm2046 bluetooth problem

Hi All !

I have a Dell Studio 1535 notebook and a built-in Broadcom bcm2046 bluetooth chipset. I installed to this machine a F10, but the bluetooth device is cannot work. I see whit lsusb, but the kernel is not detect for this a suitable driver. I read a solution,this device is supported the kernel, but i need reloading the hci_usb module with a "reset=1" parameter, but this driver is not a module in the official f10 kernel. This driver is linked statical to the main kernel image.
Can i modify this parameter whitout rebuilding the kernel?

a lsusb cut

Bus 003 Device 005: ID 0a5c:4500 Broadcom Corp.
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass            9 Hub
 bDeviceSubClass         0 Unused
 bDeviceProtocol         0 Full speed (or root) hub
 bMaxPacketSize0         8
 idVendor           0x0a5c Broadcom Corp.
 idProduct          0x4500
 bcdDevice            1.00
 iManufacturer           1 Broadcom
 iProduct                2 BCM2046B1
 iSerial                 0
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength           25
   bNumInterfaces          1
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0xe0
     Self Powered
     Remote Wakeup
   MaxPower               94mA
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1
     bInterfaceClass         9 Hub
     bInterfaceSubClass      0 Unused
     bInterfaceProtocol      0 Full speed (or root) hub
     iInterface              0
     Endpoint Descriptor:
       bLength                 7
       bDescriptorType         5
       bEndpointAddress     0x81  EP 1 IN
       bmAttributes            3
         Transfer Type            Interrupt
         Synch Type               None
         Usage Type               Data
       wMaxPacketSize     0x0001  1x 1 bytes
       bInterval             255
Hub Descriptor:
 bLength               9
 bDescriptorType      41
 nNbrPorts             3
 wHubCharacteristic 0x0004
   Ganged power switching
   Compound device
   Ganged overcurrent protection
 bPwrOn2PwrGood       50 * 2 milli seconds
 bHubContrCurrent    100 milli Ampere
 DeviceRemovable    0x0e
 PortPwrCtrlMask    0xff
Hub Port Status:
  Port 1: 0000.0103 power enable connect
  Port 2: 0000.0103 power enable connect
  Port 3: 0000.0100 power
Device Status:     0x0001
 Self Powered

Does anyone have any idea for my problem ?


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]