F10 - No sound on my OQO

[Nigel Henry]

On Thursday 04 December 2008 22:44, Robert Moskowitz wrote:
> Nigel Henry wrote:
> > On Thursday 04 December 2008 18:15, Robert Moskowitz wrote:
> >> First, I have sound on another OQO running Centos 5.2 (ALSA 1.0.14 I
> >> believe).
> >>
> >> Now here is some forensics:
> >>
> >>
> >>  From lspci -v:
> >>
> >> 02:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio
> >> Controller (rev 10)
> >>         Subsystem: VIA Technologies, Inc. VIA High Definition Audio
> >> Controller
> >>         Flags: fast devsel, IRQ 17
> >>         Memory at c2000000 (64-bit, non-prefetchable) [size=16K]
> >>         Capabilities: [50] Power Management version 2
> >>         Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
> >> Count=1/1 Enable-
> >>         Capabilities: [70] Express Root Complex Integrated Endpoint, MSI
> >> 00 Capabilities: [100] Virtual Channel <?>
> >>         Kernel modules: snd-hda-intel
> >>
> >> cat /proc/asound/version
> >>
> >> Advanced Linux Sound Architecture Driver Version 1.0.17.
> >>
> >> cat /proc/asound/cards
> >>
> >> --- no soundcards ---
> >>
> >>
> >> OOPS!!!! Why no sound card?
> >
> > Hi Robert.
> >
> > What exactly is an OQO?
>
> www.oqo.com
>
> I have the model 2 without the touchscreen or WiMax.
>
> > No sound card, means just that. the soundcard can't be detected.
> >
> > You may find that the snd modules are loaded. Try the command as below,
> > and post back the output.
> > /sbin/lsmod | grep snd
>
> snd_hda_intel 351124 0
> snd_seq_dummy 6660 0
> snd_seq_oss 30364 0
> snd_seq_midi_event 9600 1 snd_seq_oss
> snd_seq 48576 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
> snd_seq_device 10124 3 snd_seq_dummy,snd_seq_oss,snd_seq
> snd_pcm_oss 42496 0
> snd_mixer_oss 16896 1 snd_pcm_oss
> snd_pcm 65924 2 snd_hda_intel,snd_pcm_oss
> snd_timer 22024 2 snd_seq,snd_pcm
> snd_page_alloc 11016 2 snd_hda_intel,snd_pcm
> snd_hwdep 10500 1 snd_hda_intel
> snd 50616 10
> snd_hda_intel,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,
>snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep soundcore 9416 1 snd
>
> > Which make/model of Laptop/PC is this? The OQO bit is a bit confusing.
>
> I have 4 of these to be a portable test/demo bed. 3 of them have Centos
> 5.2 on them. One has F10. Interesting comparison of what works for
> Centos and what with F10. Sound is one of the items working fine with
> the Centos installs.
>
> > You could download the script from the link below, save it as
> > alsa-info.sh, make it executable, then run it as ./alsa-info.sh. Running
> > this script will upload info about your machine, and specifically sound
> > related stuff to a website. Post back the link to the site, and I, and
> > hopefully others can examine your problem.
> >
> > http://hg.alsa-project.org/alsa/raw-file/tip/alsa-info.sh

Sound not working on F10. See link to alsa-info.sh output below.
>
> http://www.alsa-project.org/db/?f=a984f3d7859f7c239c6ecf2cbf5614a1fbdd6cff

Hi Robert.

Would you please run the alsa-info.sh script on one of your Centos 5.2 
machines, where the sound is working ok. Don't trim anything on your reply, 
but just add the new link, identifying it as, "Sound working with Centos 5.2. 
See link to alsa-info.sh output below".

Nigel.