[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: F10 - No sound on my OQO

Nigel Henry wrote:
On Friday 05 December 2008 03:00, Robert Moskowitz wrote:
Nigel Henry wrote:
On Thursday 04 December 2008 22:44, Robert Moskowitz wrote:
Nigel Henry wrote:
On Thursday 04 December 2008 18:15, Robert Moskowitz wrote:
First, I have sound on another OQO running Centos 5.2 (ALSA 1.0.14 I

Now here is some forensics:

 From lspci -v:

02:01.0 Audio device: VIA Technologies, Inc. VIA High Definition Audio
Controller (rev 10)
        Subsystem: VIA Technologies, Inc. VIA High Definition Audio
        Flags: fast devsel, IRQ 17
        Memory at c2000000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Count=1/1 Enable-
        Capabilities: [70] Express Root Complex Integrated Endpoint,
MSI 00 Capabilities: [100] Virtual Channel <?>
        Kernel modules: snd-hda-intel

cat /proc/asound/version

Advanced Linux Sound Architecture Driver Version 1.0.17.

cat /proc/asound/cards

--- no soundcards ---

OOPS!!!! Why no sound card?
Hi Robert.

What exactly is an OQO?

I have the model 2 without the touchscreen or WiMax.

No sound card, means just that. the soundcard can't be detected.

You may find that the snd modules are loaded. Try the command as below,
and post back the output.
/sbin/lsmod | grep snd
snd_hda_intel 351124 0
snd_seq_dummy 6660 0
snd_seq_oss 30364 0
snd_seq_midi_event 9600 1 snd_seq_oss
snd_seq 48576 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 10124 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 42496 0
snd_mixer_oss 16896 1 snd_pcm_oss
snd_pcm 65924 2 snd_hda_intel,snd_pcm_oss
snd_timer 22024 2 snd_seq,snd_pcm
snd_page_alloc 11016 2 snd_hda_intel,snd_pcm
snd_hwdep 10500 1 snd_hda_intel
snd 50616 10
ss, snd_mixer_oss,snd_pcm,snd_timer,snd_hwdep soundcore 9416 1 snd

Which make/model of Laptop/PC is this? The OQO bit is a bit confusing.
I have 4 of these to be a portable test/demo bed. 3 of them have Centos
5.2 on them. One has F10. Interesting comparison of what works for
Centos and what with F10. Sound is one of the items working fine with
the Centos installs.

You could download the script from the link below, save it as
alsa-info.sh, make it executable, then run it as ./alsa-info.sh.
Running this script will upload info about your machine, and
specifically sound related stuff to a website. Post back the link to
the site, and I, and hopefully others can examine your problem.

Sound not working on F10. See link to alsa-info.sh output below.

Hi Robert.

Would you please run the alsa-info.sh script on one of your Centos 5.2
machines, where the sound is working ok. Don't trim anything on your
reply, but just add the new link, identifying it as, "Sound working with
Centos 5.2. See link to alsa-info.sh output below".

Thank you for your help on this.

Hi Robert.

Thanks for the link above, showing the Centos setup.

Was Fedora 10 a fresh install, or did you upgrade from an earlier version of Fedora.

I notice that alsa-driver is version 1.0.17, but you have alsa lib 1.0.18rc3, and alsa-utils 1.0.18. I don't yet have F10 installed to compare, but did you upgrade the alsa libs, and alsa utils?

You could disable pulseaudio, with a yum remove alsa-plugins-pulseaudio. I don't think it will change anything regarding the card being detected, but it's worth a reboot after removing that package just to see.

Still showing no sound card.

Also open a terminal, su to root and run, tail -f /var/log/messages, then open another terminal, and su to root, and run the following commands.
modprobe -r snd-hda-intel
modprobe snd-hda-intel

See for any messages, and if modprobe snd-hda-intel complains.

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]