cannot read music CD with Fedora 10
Kevin Kempter
kevin at kevinkempterllc.com
Sun Dec 14 23:09:37 UTC 2008
Hi All;
I'm running Fedora 10 (64bit) on a Dell laptop. I cannot read music CD's the
system doesn't even recognize that I've inserted a CD, here's my dmesg output
(below).
Thanks in advance.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.27.7-134.fc10.x86_64 (mockbuild at x86-2.fedora.phx.redhat.com)
(gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Mon Dec 1
22:21:35 EST 2008
Command line: ro root=UUID=d9ccf89c-3858-4711-9f7b-5f1197556d0a rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 00000000df451c00 (usable)
BIOS-e820: 00000000df451c00 - 00000000e0000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000320000000 (usable)
DMI 2.4 present.
last_pfn = 0x320000 max_arch_pfn = 0x3ffffffff
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdf451 max_arch_pfn = 0x3ffffffff
init_memory_mapping
0000000000 - 00df400000 page 2M
00df400000 - 00df451000 page 4k
kernel direct mapping tables up to df451000 @ 8000-e000
last_map_addr: df451000 end: df451000
init_memory_mapping
0100000000 - 0320000000 page 2M
kernel direct mapping tables up to 320000000 @ c000-1a000
last_map_addr: 320000000 end: 320000000
RAMDISK: 37ca6000 - 37fef6eb
ACPI: RSDP 000FB9B0, 0024 (r2 DELL )
ACPI: XSDT DF454600, 006C (r1 DELL M09 27D80A1B ASL 61)
ACPI: FACP DF45449C, 00F4 (r4 DELL M09 27D80A1B ASL 61)
ACPI: DSDT DF454C00, 5AFA (r2 INT430 SYSFexxx 1001 INTL 20050624)
ACPI: FACS DF463400, 0040
ACPI: HPET DF454700, 0038 (r1 DELL M09 1 ASL 61)
ACPI: ____ DF462C00, 0030 (r1 DELL M09 27D80A1B ASL 61)
ACPI: APIC DF454800, 0078 (r1 DELL M09 27D80A1B ASL 47)
ACPI: ASF! DF454400, 0076 (r32 DELL M09 27D80A1B ASL 61)
ACPI: MCFG DF4547C0, 003E (r16 DELL M09 27D80A1B ASL 61)
ACPI: SLIC DF45489C, 0176 (r1 DELL M09 27D80A1B ASL 61)
ACPI: TCPA DF454B00, 0032 (r1 0 ASL 0)
ACPI: SSDT DF452B6F, 066C (r1 PmRef CpuPm 3000 INTL 20050624)
No NUMA configuration found
Faking a node at 0000000000000000-0000000320000000
Bootmem setup node 0 0000000000000000-0000000320000000
NODE_DATA [0000000000015000 - 0000000000029fff]
bootmap [000000000002a000 - 000000000008dfff] pages 64
(7 early reservations) ==> bootmem [0000000000 - 0320000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000a2c1cc] TEXT DATA BSS ==> [0000200000 - 0000a2c1cc]
#3 [0037ca6000 - 0037fef6eb] RAMDISK ==> [0037ca6000 - 0037fef6eb]
#4 [000009b800 - 0000100000] BIOS reserved ==> [000009b800 - 0000100000]
#5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000]
#6 [000000c000 - 0000015000] PGTABLE ==> [000000c000 - 0000015000]
[ffffe20000000000-ffffe2000affffff] PMD -> [ffff880028200000-ffff880032bfffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00320000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x0000009b
0: 0x00000100 -> 0x000df451
0: 0x00100000 -> 0x00320000
On node 0 totalpages: 3142636
DMA zone: 1731 pages, LIFO batch:0
DMA32 zone: 896137 pages, LIFO batch:31
Normal zone: 2197760 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: 000000000009b000 - 000000000009c000
PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
PM: Registered nosave memory: 00000000df451000 - 00000000df452000
PM: Registered nosave memory: 00000000df452000 - 00000000e0000000
PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
PM: Registered nosave memory: 00000000fec10000 - 00000000fed18000
PM: Registered nosave memory: 00000000fed18000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fed90000
PM: Registered nosave memory: 00000000fed90000 - 00000000feda0000
PM: Registered nosave memory: 00000000feda0000 - 00000000feda6000
PM: Registered nosave memory: 00000000feda6000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000
PM: Registered nosave memory: 00000000fee10000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at e2000000 (gap: e0000000:18000000)
PERCPU: Allocating 65184 bytes of per cpu data
NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3095628
Policy zone: Normal
Kernel command line: ro root=UUID=d9ccf89c-3858-4711-9f7b-5f1197556d0a rhgb
quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PMTIMER calibration value
Detected 3058.997 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x20000000 - 0x24000000
Memory: 12318020k/13107200k available (3301k kernel code, 252524k reserved,
1837k data, 1292k init)
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency..
6117.99 BogoMIPS (lpj=3058997)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
ACPI: Core revision 20080609
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Extreme CPU X9100 @ 3.06GHz stepping 06
Using local APIC timer interrupts.
APIC timer calibration result 16625004
Detected 16.625 MHz APIC timer.
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6118.05 BogoMIPS (lpj=3059026)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Extreme CPU X9100 @ 3.06GHz stepping 06
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (12236.04 BogoMIPS).
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=5904 bytes
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
net_namespace: 1552 bytes
Booting paravirtualized kernel on bare hardware
Time: 22:58:24 Date: 12/14/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG at f8000000 - fbffffff
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: Dell Inc.
ACPI: DMI Product Name: Precision M6400
ACPI: DMI Product Version:
ACPI: DMI Board Name: 0G841G
ACPI: DMI BIOS Vendor: Dell Inc.
ACPI: DMI BIOS Date: 10/27/2008
ACPI: Please send DMI info above to linux-acpi at vger.kernel.org
ACPI: If "acpi_osi=Linux" works better, please notify linux-
acpi at vger.kernel.org
ACPI: SSDT DF463480, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x11, I/O: command/status = 0x934, data = 0x930
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:1a.0 reg 20 io port: [6f60, 6f7f]
PCI: 0000:00:1a.1 reg 20 io port: [6f80, 6f9f]
PCI: 0000:00:1a.2 reg 20 io port: [6fa0, 6fbf]
PCI: 0000:00:1a.7 reg 10 32bit mmio: [fed1c400, fed1c7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
PCI: 0000:00:1b.0 reg 10 64bit mmio: [f6ffc000, f6ffffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [6f00, 6f1f]
PCI: 0000:00:1d.1 reg 20 io port: [6f20, 6f3f]
PCI: 0000:00:1d.2 reg 20 io port: [6f40, 6f5f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [fed1c000, fed1c3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
PCI: 0000:00:1f.2 reg 10 io port: [6e70, 6e77]
PCI: 0000:00:1f.2 reg 14 io port: [6e78, 6e7b]
PCI: 0000:00:1f.2 reg 18 io port: [6e80, 6e87]
PCI: 0000:00:1f.2 reg 1c io port: [6e88, 6e8b]
PCI: 0000:00:1f.2 reg 20 io port: [6ea0, 6ebf]
PCI: 0000:00:1f.2 reg 24 32bit mmio: [fed1c800, fed1cfff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
PCI: 0000:00:1f.3 reg 10 64bit mmio: [f6ffbf00, f6ffbfff]
PCI: 0000:00:1f.3 reg 20 io port: [1100, 111f]
PCI: 0000:01:00.0 reg 10 32bit mmio: [f5000000, f5ffffff]
PCI: 0000:01:00.0 reg 14 64bit mmio: [e0000000, efffffff]
PCI: 0000:01:00.0 reg 1c 64bit mmio: [f2000000, f3ffffff]
PCI: 0000:01:00.0 reg 24 io port: [df00, df7f]
PCI: 0000:01:00.0 reg 30 32bit mmio: [f6e00000, f6e1ffff]
PCI: bridge 0000:00:01.0 io port: [d000, dfff]
PCI: bridge 0000:00:01.0 32bit mmio: [f2000000, f6efffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [e0000000, efffffff]
PCI: 0000:0c:00.0 reg 10 64bit mmio: [f1ffe000, f1ffffff]
pci 0000:0c:00.0: PME# supported from D0 D3hot D3cold
pci 0000:0c:00.0: PME# disabled
PCI: bridge 0000:00:1c.1 32bit mmio: [f1f00000, f1ffffff]
PCI: bridge 0000:00:1c.3 io port: [c000, cfff]
PCI: bridge 0000:00:1c.3 32bit mmio: [f1c00000, f1efffff]
PCI: bridge 0000:00:1c.3 64bit mmio pref: [f0000000, f01fffff]
PCI: 0000:09:00.0 reg 10 64bit mmio: [f1be0000, f1beffff]
PCI: 0000:09:00.0 reg 18 64bit mmio: [f1bf0000, f1bfffff]
pci 0000:09:00.0: PME# supported from D3hot D3cold
pci 0000:09:00.0: PME# disabled
PCI: bridge 0000:00:1c.5 32bit mmio: [f1b00000, f1bfffff]
PCI: 0000:03:01.0 reg 10 32bit mmio: [0, fff]
pci 0000:03:01.0: supports D1
pci 0000:03:01.0: supports D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
PCI: 0000:03:01.1 reg 10 32bit mmio: [f1aff800, f1afffff]
pci 0000:03:01.1: supports D1
pci 0000:03:01.1: supports D2
pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.1: PME# disabled
PCI: 0000:03:01.2 reg 10 32bit mmio: [f1aff400, f1aff4ff]
pci 0000:03:01.2: supports D1
pci 0000:03:01.2: supports D2
pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.2: PME# disabled
PCI: 0000:03:01.3 reg 10 32bit mmio: [f1aff500, f1aff5ff]
pci 0000:03:01.3: supports D1
pci 0000:03:01.3: supports D2
pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.3: PME# disabled
PCI: 0000:03:01.4 reg 10 32bit mmio: [f1aff600, f1aff6ff]
pci 0000:03:01.4: supports D1
pci 0000:03:01.4: supports D2
pci 0000:03:01.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.4: PME# disabled
PCI: 0000:03:01.5 reg 10 32bit mmio: [f1aff700, f1aff7ff]
pci 0000:03:01.5: supports D1
pci 0000:03:01.5: supports D2
pci 0000:03:01.5: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.5: PME# disabled
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 32bit mmio: [f1a00000, f1afffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *3
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *3
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 64-bit timers, 14318180 Hz
tracer: 1286 pages allocated for 65536 entries of 80 bytes
actual entries 65586
ACPI: RTC can wake from S4
system 00:05: ioport range 0xc80-0xcaf has been reserved
system 00:05: ioport range 0xcc0-0xcff could not be reserved
system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:09: ioport range 0xcb0-0xcbb has been reserved
system 00:09: iomem range 0xfed40000-0xfed44fff could not be reserved
system 00:0a: ioport range 0x900-0x92f has been reserved
system 00:0a: ioport range 0x931-0x933 has been reserved
system 00:0a: ioport range 0x935-0x97f has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x1000-0x1005 has been reserved
system 00:0a: ioport range 0x1008-0x100f has been reserved
system 00:0b: ioport range 0xf400-0xf4fe has been reserved
system 00:0b: ioport range 0x1006-0x1007 has been reserved
system 00:0b: ioport range 0x100a-0x1059 could not be reserved
system 00:0b: ioport range 0x1080-0x10bf has been reserved
system 00:0b: ioport range 0x1100-0x111f has been reserved
system 00:0b: ioport range 0x1010-0x102f has been reserved
system 00:0b: ioport range 0x809-0x809 has been reserved
system 00:0c: iomem range 0x0-0x9efff could not be reserved
system 00:0c: iomem range 0x9f000-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xd3fff has been reserved
system 00:0c: iomem range 0xe0000-0xfffff has been reserved
system 00:0c: iomem range 0x100000-0xdf451bff could not be reserved
system 00:0c: iomem range 0xdf451c00-0xdfefffff could not be reserved
system 00:0c: iomem range 0xdff00000-0xdfffffff could not be reserved
system 00:0c: iomem range 0xffe00000-0xffffffff could not be reserved
system 00:0c: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:0c: iomem range 0xfec00000-0xfec0ffff could not be reserved
system 00:0c: iomem range 0xfee00000-0xfee0ffff could not be reserved
system 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved
system 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved
system 00:0c: iomem range 0xfeda0000-0xfeda3fff could not be reserved
system 00:0c: iomem range 0xfeda4000-0xfeda4fff could not be reserved
system 00:0c: iomem range 0xfeda5000-0xfeda5fff could not be reserved
system 00:0c: iomem range 0xfeda6000-0xfeda6fff has been reserved
system 00:0c: iomem range 0xfed1c800-0xfed1cfff has been reserved
system 00:0c: iomem range 0xfed18000-0xfed1bfff could not be reserved
system 00:0c: iomem range 0xf8000000-0xfbffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xf2000000-0xf6efffff
pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xf1f00000-0xf1ffffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.2: PCI bridge, secondary bus 0000:0d
pci 0000:00:1c.2: IO window: disabled
pci 0000:00:1c.2: MEM window: disabled
pci 0000:00:1c.2: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0e
pci 0000:00:1c.3: IO window: 0xc000-0xcfff
pci 0000:00:1c.3: MEM window: 0xf1c00000-0xf1efffff
pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f01fffff
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:10
pci 0000:00:1c.4: IO window: disabled
pci 0000:00:1c.4: MEM window: disabled
pci 0000:00:1c.4: PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.5: IO window: disabled
pci 0000:00:1c.5: MEM window: 0xf1b00000-0xf1bfffff
pci 0000:00:1c.5: PREFETCH window: disabled
pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
pci 0000:03:01.0: IO window: 0x002000-0x0020ff
pci 0000:03:01.0: IO window: 0x002400-0x0024ff
pci 0000:03:01.0: PREFETCH window: 0x320000000-0x323ffffff
pci 0000:03:01.0: MEM window: 0x324000000-0x327ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: 0x2000-0x2fff
pci 0000:00:1e.0: MEM window: 0xf1a00000-0xf1afffff
pci 0000:00:1e.0: PREFETCH window: 0x00000320000000-0x00000323ffffff
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [d000, dfff]
bus: 01 index 1 mmio: [f2000000, f6efffff]
bus: 01 index 2 mmio: [e0000000, efffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 0b index 0 mmio: [0, 0]
bus: 0b index 1 mmio: [0, 0]
bus: 0b index 2 mmio: [0, 0]
bus: 0b index 3 mmio: [0, 0]
bus: 0c index 0 mmio: [0, 0]
bus: 0c index 1 mmio: [f1f00000, f1ffffff]
bus: 0c index 2 mmio: [0, 0]
bus: 0c index 3 mmio: [0, 0]
bus: 0d index 0 mmio: [0, 0]
bus: 0d index 1 mmio: [0, 0]
bus: 0d index 2 mmio: [0, 0]
bus: 0d index 3 mmio: [0, 0]
bus: 0e index 0 io port: [c000, cfff]
bus: 0e index 1 mmio: [f1c00000, f1efffff]
bus: 0e index 2 mmio: [f0000000, f01fffff]
bus: 0e index 3 mmio: [0, 0]
bus: 10 index 0 mmio: [0, 0]
bus: 10 index 1 mmio: [0, 0]
bus: 10 index 2 mmio: [0, 0]
bus: 10 index 3 mmio: [0, 0]
bus: 09 index 0 mmio: [0, 0]
bus: 09 index 1 mmio: [f1b00000, f1bfffff]
bus: 09 index 2 mmio: [0, 0]
bus: 09 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [2000, 2fff]
bus: 03 index 1 mmio: [f1a00000, f1afffff]
bus: 03 index 2 mmio: [320000000, 323ffffff]
bus: 03 index 3 io port: [0, ffff]
bus: 03 index 4 mmio: [0, ffffffffffffffff]
bus: 04 index 0 io port: [2000, 20ff]
bus: 04 index 1 io port: [2400, 24ff]
bus: 04 index 2 mmio: [320000000, 323ffffff]
bus: 04 index 3 mmio: [324000000, 327ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
Freeing initrd memory: 3365k freed
audit: initializing netlink socket (disabled)
type=2000 audit(1229295503.528:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 24065
SELinux: Registering netfilter hooks
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.2: setting latency timer to 64
pcieport-driver 0000:00:1c.2: found MSI capability
pci_express 0000:00:1c.2:pcie00: allocate port service
pci_express 0000:00:1c.2:pcie02: allocate port service
pci_express 0000:00:1c.2:pcie03: allocate port service
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: found MSI capability
pci_express 0000:00:1c.3:pcie00: allocate port service
pci_express 0000:00:1c.3:pcie02: allocate port service
pci_express 0000:00:1c.3:pcie03: allocate port service
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: found MSI capability
pci_express 0000:00:1c.4:pcie00: allocate port service
pci_express 0000:00:1c.4:pcie02: allocate port service
pci_express 0000:00:1c.4:pcie03: allocate port service
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pcieport-driver 0000:00:1c.5: found MSI capability
pci_express 0000:00:1c.5:pcie00: allocate port service
pci_express 0000:00:1c.5:pcie02: allocate port service
pci_express 0000:00:1c.5:pcie03: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp_glue: can't get bus number, assuming 0
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
ACPI: Sleep Button (CM) [SBTN]
ACPI: SSDT DF4531DB, 023F (r1 PmRef BspIst 3000 INTL 20050624)
ACPI: SSDT DF4535F1, 05C6 (r1 PmRef BspCst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT DF45341A, 01D7 (r1 PmRef ApIst 3000 INTL 20050624)
ACPI: SSDT DF453BB7, 008D (r1 PmRef ApCst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (50 C)
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input3
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048 at 0xfed1c800 port 0xfed1c900 irq 19
ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 19
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 19
ata6: SATA max UDMA/133 abar m2048 at 0xfed1c800 port 0xfed1cb80 irq 19
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST9320421ASG, DE14, max UDMA/133
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVD+/-RW GS20N, A106, max UDMA/133
ata2.00: configured for UDMA/133
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-8: ST9320421ASG, DE14, max UDMA/133
ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA ST9320421ASG DE14 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GS20N A106 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
scsi 4:0:0:0: Direct-Access ATA ST9320421ASG DE14 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sd 4:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
sdb: sdb1
sd 4:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27.7-134.fc10.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
usb 1-6: new high speed USB device using ehci_hcd and address 3
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27.7-134.fc10.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-6: configuration #1 chosen from 1 choice
usb 1-6: New USB device found, idVendor=05ca, idProduct=18a0
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=9
usb 1-6: Product: Integrated Webcam
usb 1-6: Manufacturer: Ricoh co. Ltd.
usb 1-6: SerialNumber: CN0TX6137248788IACBK
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27.7-134.fc10.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.27.7-134.fc10.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x00006fa0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.27.7-134.fc10.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.27.7-134.fc10.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 5-1: configuration #0 chosen from 1 choice
usb 5-1: config 0 descriptor??
usb 5-1: New USB device found, idVendor=0a5c, idProduct=5800
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: 5880
usb 5-1: Manufacturer: Broadcom Corp
usb 5-1: SerialNumber: 0123456789ABCD
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.27.7-134.fc10.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 6-1: new full speed USB device using uhci_hcd and address 2
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 2.6.27.7-134.fc10.x86_64 uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Warning: Keylock active.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-
devel at redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
Marking TSC unstable due to TSC halts in idle
usb 6-1: configuration #1 chosen from 1 choice
usb 6-1: New USB device found, idVendor=0830, idProduct=0061
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
usb 6-1: Product: Palm Handheld
usb 6-1: Manufacturer: Palm, Inc.
usb 6-1: SerialNumber: PalmSN12345678
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
Magic number: 4:865:1007
input input4: hash matches
system 00:09: hash matches
Freeing unused kernel memory: 1292k freed
Write protecting the kernel read-only data: 4744k
Clocksource tsc unstable (delta = -162669725 ns)
Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd44791/0xf0040d
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1229295508.944:2): enforcing=1 old_enforcing=0 auid=4294967295
ses=4294967295
SELinux: 8192 avtab hash slots, 112214 rules.
SELinux: 8192 avtab hash slots, 112214 rules.
SELinux: 8 users, 11 roles, 2641 types, 119 bools, 1 sens, 1024 cats
SELinux: 73 classes, 112214 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1229295509.215:3): policy loaded auid=4294967295
ses=4294967295
udevd version 127 started
Yenta: CardBus bridge found at 0000:03:01.0 [1028:0251]
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC] (on-line)
ACPI: WMI: Mapper loaded
Yenta: ISA IRQ mask 0x0cb8, PCI irq 19
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
pcmcia: parent PCI bridge Memory window: 0xf1a00000 - 0xf1afffff
pcmcia: parent PCI bridge Memory window: 0x320000000 - 0x323ffffff
acpi device:36: registered as cooling_device2
input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:33/device:34/input/input6
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: PC Speaker as /devices/platform/pcspkr/input/input7
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device Integrated Webcam (05ca:18a0)
uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling
workaround.
input: Integrated Webcam as
/devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
input: PS/2 Generic Mouse as
/devices/platform/i8042/serio1/serio2/input/input9
ricoh-mmc: Ricoh MMC controller found at 0000:03:01.3 [1180:0843] (rev 11)
ricoh-mmc: Controller is now disabled.
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
tg3.c:v3.94 (August 14, 2008)
tg3 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:09:00.0: setting latency timer to 64
firewire_ohci 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
eth0: Tigon3 [partno(BCM95761e) rev 5761100 PHY(5761)] (PCI Express)
10/100/1000Base-T Ethernet 00:21:70:8a:95:ce
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
firewire_ohci: Added fw-ohci device 0000:03:01.1, OHCI version 1.10
sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 21)
sdhci-pci 0000:03:01.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
Registered led device: mmc0
mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1
(0xf/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0xb, fmic=0xe, line=0x0,
fline=0x0, cd=0x0, aux=0x0
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27kds
iwlagn: Copyright(c) 2003-2008 Intel Corporation
iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:0c:00.0: setting latency timer to 64
iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:0c:00.0: PCI INT A disabled
phy0: Selected rate control algorithm 'iwl-agn-rs'
firewire_core: created device fw0: GUID 484fc0000e4ad9e1, S400
ALSA sound/pci/hda/hda_intel.c:609: hda_intel: azx_get_response timeout,
switching to polling mode: last cmd=0x01cb8000
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sdb1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 12289716k swap on /dev/sda2. Priority:-1 extents:1 across:12289716k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran at aivazian.fsnet.co.uk>
firmware: requesting intel-ucode/06-17-06
firmware: requesting intel-ucode/06-17-06
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
/dev/vmmon[2316]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[2316]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0
anyDisabled=1
/dev/vmmon[2316]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=0
anyDisabled=1
/dev/vmmon[2316]: Module vmmon: initialized
/dev/vmci[2329]: VMCI: Driver initialized.
/dev/vmci[2329]: Module vmci: registered with major=10 minor=59
/dev/vmci[2329]: Module vmci: initialized
SELinux: initialized (dev vmblock, type vmblock), uses genfs_contexts
ppdev: user-space parallel port driver
/dev/vmnet: open called by PID 2400 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: up
ADDRCONF(NETDEV_UP): eth0: link is not ready
bridge-eth0: attached
bridge-eth0: disabling the bridge
bridge-eth0: down
iwlagn 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:0c:00.0: restoring config space at offset 0x1 (was 0x100102, writing
0x100106)
firmware: requesting iwlwifi-5000-1.ucode
Registered led device: iwl-phy0:radio
Registered led device: iwl-phy0:assoc
Registered led device: iwl-phy0:RX
Registered led device: iwl-phy0:TX
/dev/vmnet: open called by PID 2919 (vmnet-dhcpd)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
ADDRCONF(NETDEV_UP): wlan0: link is not ready
bridge-eth0: detached
/dev/vmnet: open called by PID 2400 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: is a Wireless Adapter
bridge-wlan0: up
bridge-wlan0: attached
bridge-wlan0: disabling the bridge
bridge-wlan0: down
bridge-wlan0: detached
/dev/vmnet: open called by PID 2930 (vmnet-netifup)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 2939 (vmnet-dhcpd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2941 (vmnet-natd)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2945 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
Bluetooth: Core ver 2.13
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
mtrr: base(0xf3000000) is not aligned on a size(0xe00000) boundary
vmnet1: no IPv6 routers present
vmnet8: no IPv6 routers present
fuse init (API version 7.9)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
wlan0: authenticate with AP 00:1f:33:7e:7b:8a
wlan0: authenticate with AP 00:1f:33:7e:7b:8a
wlan0: authenticate with AP 00:1f:33:7e:7b:8a
wlan0: authenticated
wlan0: associate with AP 00:1f:33:7e:7b:8a
wlan0: RX AssocResp from 00:1f:33:7e:7b:8a (capab=0x431 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
/dev/vmnet: open called by PID 2400 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-wlan0: is a Wireless Adapter
bridge-wlan0: up
bridge-wlan0: attached
wlan0: no IPv6 routers present
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
domain 1: span 0-1 level NODE
groups: 0-1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
domain 1: span 0-1 level NODE
groups: 0-1
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
Buffer I/O error on device sr0, logical block 1
Buffer I/O error on device sr0, logical block 2
Buffer I/O error on device sr0, logical block 3
Buffer I/O error on device sr0, logical block 4
Buffer I/O error on device sr0, logical block 5
Buffer I/O error on device sr0, logical block 6
Buffer I/O error on device sr0, logical block 7
Buffer I/O error on device sr0, logical block 8
Buffer I/O error on device sr0, logical block 9
sr 1:0:0:0: [sr0] unaligned transfer
sr 1:0:0:0: [sr0] unaligned transfer
sr 1:0:0:0: [sr0] unaligned transfer
sr 1:0:0:0: [sr0] unaligned transfer
sr 1:0:0:0: [sr0] unaligned transfer
sr 1:0:0:0: [sr0] unaligned transfer
sr 1:0:0:0: [sr0] unaligned transfer
sr 1:0:0:0: [sr0] unaligned transfer
More information about the fedora-list
mailing list