[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Screwiness with PCI-E SATA card?



On 12/16/2008 01:17 PM, Jonathan Gardner wrote:
Thanks for the pointers. I am running the e2fsck command now.
Someone may find the following useful. Note that the ext3 partition is
living on VolGroup01/LogVol02. VolGroup lives entirely on /dev/sdc2,
which is a massive partition on the 500GB drive connected over the SATA
PCI-E card. So the device I am using is:

      # e2fsck -k -c -c -f -y -C 0 -v /dev/VolGroup01/LogVol02
      e2fsck 1.41.3 (12-Oct-2008)
      Checking for bad blocks (non-destructive read-write test)
      Testing with random pattern:   9.07% done, 4:08 elapsed

The partition is about 20GB, and even though the drive can get some very
fast speeds, it is going to take about an hour to run through it. I'll
post the results here in case someone may find use of it.

/dev/VolGroup01/LogVol02: ***** FILE SYSTEM WAS MODIFIED *****

  274148 inodes used (21.40%)
    3064 non-contiguous inodes (1.1%)
         # of inodes with ind/dind/tind blocks: 14652/116/0
 1733220 blocks used (33.85%)
       0 bad blocks
       1 large file

  236578 regular files
   23504 directories
       0 character device files
       1 block device file
       0 fifos
    4950 links
   14030 symbolic links (13868 fast symbolic links)
      26 sockets
--------
  279089 files

I'm going to start the badblocks process now.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]