[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Setting up Linksys WRT54GL for Remote Server

On Wed, Dec 17, 2008 at 3:43 PM, Jim <mickeyboa sbcglobal net> wrote:

> But on the client side in NX for each user on server, how do you treat that
> in NX ?


You can't get the answer to a question you don't ask. The more
information you provide, the more likely you are to get the exact
information you need.

Since you're using NX and not just ssh, you may find it advantageous
to reconfigure the servers to listen on different ports (like the 8122
and 8222 I suggested before, ports above 1000 are recommended) and
then have the router pass the packets through directly on those ports.
Then, you will need to reconfigure both the NX server and the NX node
to use that port.

There are many varieties of NX, both free and commercial. I haven't
worked with it since 2006, so my advice is likely out of date. I'd
suggest you check the support forum on the NX site at nomachine.com,
for answers such as this one:
http://www.nomachine.com/ar/view.php?ar_id=AR06E00470. They have a
very good support forum and should have answers to this
frequently-asked-question for the specific version and platform you're

Ted Roche
Ted Roche & Associates, LLC

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]