[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Make a DHCP server using Fedora - Help



Dear all,

I am trying once again, something that I have not succeeded in doing.  I have tried before:

http://marc.info/?l=fedora-list&m=112527669314098&w=4

Now I am at it again, this time, I want to succeed.  I have read the documentation again and I can't succeed, I have tried copying different /etc/dhcpcd.conf files from different places, but not working

I copied over the sample from 

http://www.redhatmagazine.com/2008/08/05/linux-dhcp-server-static-ips-are-gone-in-60-seconds/

and I did not succeed, then I copied the one in 
usr/share/doc/dhcp-3.0.5/dhcpd.conf.sample

but I still fail.  I have two nic's one from the motherboard and a different one(PCI)

[root localhost ~]# lspci                                     
00:00.0 Host bridge: nVidia Corporation nForce2 IGP2 (rev a2)               
00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev a2) 
00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev a2) 
00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev a2) 
00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev a2) 
00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev a2) 
00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)          
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)              
00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)  
00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)  
00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)  
00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)                                                                            
00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1)                                                             
00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)     
00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)                  
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev a2)                     
01:08.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]       
02:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)                                                                           
[root localhost network-scripts]# ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:0E:A6:42:59:AF  
          inet addr:10.154.19.210  Bcast:10.154.19.255  Mask:255.255.255.0
          inet6 addr: fe80::20e:a6ff:fe42:59af/64 Scope:Link              
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1              
          RX packets:19576 errors:0 dropped:0 overruns:0 frame:0          
          TX packets:12673 errors:0 dropped:0 overruns:0 carrier:0        
          collisions:0 txqueuelen:1000                                    
          RX bytes:12621674 (12.0 MiB)  TX bytes:2753082 (2.6 MiB)        
          Interrupt:22 Base address:0x6000                                

eth1      Link encap:Ethernet  HWaddr 00:60:97:C5:2A:C3  
          inet6 addr: fe80::260:97ff:fec5:2ac3/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000                         
          RX bytes:0 (0.0 b)  TX bytes:1836 (1.7 KiB)
          Interrupt:18 Base address:0xdf00

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:40 errors:0 dropped:0 overruns:0 frame:0
          TX packets:40 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:2264 (2.2 KiB)  TX bytes:2264 (2.2 KiB)

pan0      Link encap:Ethernet  HWaddr AA:FA:32:AC:03:01
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)


00:04.0 Ethernet controller: nVidia Corporation ===> eth0 
01:08.0 Ethernet controller: 3Com Corporation 3c905 100BaseTX [Boomerang]       ===> eth1

I am running Fedora 10 Preview updated to latest.  I have 

[root localhost ~]# rpm -qa dhcp*
dhcpv6-client-1.0.22-1.fc10.i386
dhcp-4.0.0-30.fc10.i386
[root localhost ~]#


I have read the howto's from here:

http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch08_:_Configuring_the_DHCP_Server

and 

http://www.howtoforge.com/perfect-server-fedora9

as well as the article in Red Hat Magazine.  In looking at the troubleshooting, I see 

[root localhost ~]# service dhcpd start
Starting dhcpd:                                            [FAILED]
[root localhost ~]# /usr/sbin/dhcpd -t -cf /etc/dhcpd.conf
Internet Systems Consortium DHCP Server 4.0.0             
Copyright 2004-2007 Internet Systems Consortium.          
All rights reserved.                                      
For info, please visit http://www.isc.org/sw/dhcp/        
Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file                                                          
[root localhost ~]# dhcpd -f
Internet Systems Consortium DHCP Server 4.0.0
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.                            
For info, please visit http://www.isc.org/sw/dhcp/
Not searching LDAP since ldap-server, ldap-port and ldap-base-dn were not specified in the config file                                                          
Wrote 0 class decls to leases file.                                             
Wrote 0 deleted host decls to leases file.                                      
Wrote 0 new dynamic host decls to leases file.                                  
Wrote 0 leases to leases file.                                                  

No subnet declaration for eth0 (10.154.19.210).
** Ignoring requests on eth0.  If this is not what
   you want, please write a subnet declaration
   in your dhcpd.conf file for the network segment
   to which interface eth0 is attached. **


Not configured to listen on any interfaces!

This version of ISC DHCP is based on the release available
on ftp.isc.org.  Features have been added and other changes
have been made to the base software release in order to make
it work better with this distribution.

Please report for this software via the Red Hat Bugzilla site:
    http://bugzilla.redhat.com

exiting.

[root localhost ~]# cat /etc/dhcpd.conf 
# dhcpd.conf                            
#                                       
# Sample configuration file for ISC dhcpd
#                                        

# option definitions common to all supported networks...
option domain-name "example.org";                       
option domain-name-servers ns1.example.org, ns2.example.org;

default-lease-time 600;
max-lease-time 7200;   

# Use this to enble / disable dynamic dns updates globally.
#ddns-update-style none;                                   

# If this DHCP server is the official DHCP server for the local
# network, the authoritative directive should be uncommented.  
#authoritative;                                                

# Use this to send dhcp log messages to a different log file (you also
# have to hack syslog.conf to complete the redirection).              
log-facility local7;                                                  

# No service will be given on this subnet, but declaring it helps the 
# DHCP server to understand the network topology.                     

subnet 10.152.187.0 netmask 255.255.255.0 {
}                                          

# This is a very basic subnet declaration.

subnet 10.254.239.0 netmask 255.255.255.224 {
  range 10.254.239.10 10.254.239.20;         
  option routers rtr-239-0-1.example.org, rtr-239-0-2.example.org;
}                                                                 

# This declaration allows BOOTP clients to get dynamic addresses,
# which we don't really recommend.                               

subnet 10.254.239.32 netmask 255.255.255.224 {
  range dynamic-bootp 10.254.239.40 10.254.239.60;
  option broadcast-address 10.254.239.31;         
  option routers rtr-239-32-1.example.org;        
}                                                 

# A slightly different configuration for an internal subnet.
subnet 10.5.5.0 netmask 255.255.255.224 {                   
  range 10.5.5.26 10.5.5.30;                                
  option domain-name-servers ns1.internal.example.org;      
  option domain-name "internal.example.org";                
  option routers 10.5.5.1;                                  
  option broadcast-address 10.5.5.31;                       
  default-lease-time 600;                                   
  max-lease-time 7200;                                      
}                                                           

# Hosts which require special configuration options can be listed in
# host statements.   If no address is specified, the address will be
# allocated dynamically (if possible), but the host-specific information
# will still come from the host declaration.                            

host passacaglia {
  hardware ethernet 0:0:c0:5d:bd:95;
  filename "vmunix.passacaglia";    
  server-name "toccata.fugue.com";  
}                                   

# Fixed IP addresses can also be specified for hosts.   These addresses
# should not also be listed as being available for dynamic assignment. 
# Hosts for which fixed IP addresses have been specified can boot using
# BOOTP or DHCP.   Hosts for which no fixed address is specified can only
# be booted with DHCP, unless there is an address range on the subnet    
# to which a BOOTP client is connected which has the dynamic-bootp flag  
# set.                                                                   
host fantasia {                                                          
  hardware ethernet 08:00:07:26:c0:a5;                                   
  fixed-address fantasia.fugue.com;                                      
}                                                                        

# You can declare a class of clients and then do address allocation
# based on that.   The example below shows a case where all clients
# in a certain class get addresses on the 10.17.224/24 subnet, and all
# other clients get addresses on the 10.0.29/24 subnet.               

class "foo" {
  match if substring (option vendor-class-identifier, 0, 4) = "SUNW";
}

shared-network 224-29 {
  subnet 10.17.224.0 netmask 255.255.255.0 {
    option routers rtr-224.example.org;
  }
  subnet 10.0.29.0 netmask 255.255.255.0 {
    option routers rtr-29.example.org;
  }
  pool {
    allow members of "foo";
    range 10.17.224.10 10.17.224.250;
  }
  pool {
    deny members of "foo";
    range 10.0.29.10 10.0.29.230;
  }
}
[olivares localhost ~]$ cat /etc/fedora-release
Fedora release 10 (Cambridge)
[olivares localhost ~]$ uname -a
Linux localhost 2.6.27.5-109.fc10.i686 #1 SMP Thu Nov 13 21:01:50 EST 2008 i686athlon i386 GNU/Linux
[olivares localhost ~]$


Thank you in Advance for advice, suggestions, howto's and guidance.

Regards,

Antonio 



      


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]