[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Not able to Login to F10



Hi Steve and Jim,
                       I was able to boot into shell with run level 3.
I have already updated my system by doing 'yum update'.

On Thu, Nov 27, 2008 at 5:29 PM, Jim van Wel <jim coolzero info> wrote:
> Hi there,
>
> Got the same issue. Fix was easy.
>
> X -configure
>
> Makes a xorg.conf file in /etc/X11
:( It is not creating file in /etc/X11. It creating a file
'/root/xorg.conf.new' and asking me to test with command:
X -config <filename>
Anyway this is not working.

My system's configuration is:
Graphics Adapter: Intel 82845G
Monitor:               ViewSonic VE510s
Motherboard:        Intel D845GVSR

I have collected the log while running 'X -configure'

[...snip...]
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-92.1.10.el5 i686
Current Operating System: Linux localhost.localdomain
2.6.27.5-117.fc10.i686 #1 SMP Tue Nov 18 12:19:59 EST 2008 i686
Build Date: 16 November 2008  08:29:02PM
Build ID: xorg-x11-server 1.5.3-5.fc10
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 27 23:27:46 2008
List of video drivers:
	i740
	rendition
	siliconmotion
	voodoo
	ati
	savage
	i810
	sis
	neomagic
	trident
	mga
	v4l
	openchrome
	nv
	i128
	vmware
	s3virge
	glint
	nouveau
	ast
	cirrus
	radeon
	tdfx
	apm
	r128
	intel
	geode
	sisusb
	ztv
	amd
	mach64
	dummy
	fbdev
	vesa
(++) Using config file: "/root/xorg.conf.new"


Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.

Your xorg.conf file is /root/xorg.conf.new

To test the server, run 'X -config /root/xorg.conf.new'

[...snip...]


Here  I am pasting my working Fedora 9 xorg.conf

[...snip...]
# Xorg configuration created by system-config-display

Section "ServerLayout"
	Identifier     "single head configuration"
	Screen      0  "Screen0" 0 0
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "InputDevice"

# keyboard added by rhpxl
	Identifier  "Keyboard0"
	Driver      "kbd"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "us"
EndSection

Section "Device"
	Identifier  "Videocard0"
	Driver      "intel"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Videocard0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes    "1024x768" "800x600" "640x480"
	EndSubSection
EndSection

[...snip...]


Here I am pasting my new Fedora 10 xorg.conf.new file generated by
running 'X -configure'

[...snip...]

Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "Screen0" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "catalogue:/etc/X11/fontpath.d"
	FontPath     "built-ins"
EndSection

Section "Module"
	Load  "glx"
	Load  "dbe"
	Load  "extmod"
	Load  "dri"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"            	# [<bool>]
        #Option     "SWcursor"           	# [<bool>]
        #Option     "ColorKey"           	# <i>
        #Option     "CacheLines"         	# <i>
        #Option     "Dac6Bit"            	# [<bool>]
        #Option     "DRI"                	# [<bool>]
        #Option     "NoDDC"              	# [<bool>]
        #Option     "ShowCache"          	# [<bool>]
        #Option     "XvMCSurfaces"       	# <i>
        #Option     "PageFlip"           	# [<bool>]
	Identifier  "Card0"
	Driver      "intel"
	VendorName  "Intel Corporation"
	BoardName   "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
	BusID       "PCI:0:2:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

[...snip...]

Thanks,
Anoop

>
> Then try to change some settings like:
>
> Option     "NoAccel"
>
> Or disable DRI etc...
>
> Before you can type these command's you need the console before it crashes
> to X.
> You need to single boot the system (or init 3), so in grub, get the line:
>
> In grub menu:
> Type:
> e
> and e again on this line:
> /vmlinuz-2.6.27.5-117.fc10.i686 ro root=UUID=blablabla rhgb single
>
> The Enter to save for this moment, and then type "b".
>
> If you have a Intel 965 and below chipset, remember, you virtual desktop
> cannot be larger then 2048X2048 with Acceleration. But it's maybe easyer
> if you send the hardware information.
>
> Good luck!
>
> Greetings,
> Jim.
>
>> On Thu, Nov 27, 2008 at 1:52 PM, Anoop <anoop chargotra gmail com> wrote:
>>> Hi List,
>>>           I installed F10 in text mode from F10 DVD. Graphical mode
>>> was giving issues, like sometimes system was freezing and on other
>>> occasions I was just able to move the mouse cursor.
>>> Installation went fine but when booted, I encountered same problem. I
>>> could not see anything on console, though there was a progress bar at
>>> the bottom of the screen going from left corner to right corner. I am
>>> able to see login screen sometimes and on other occasions screen is
>>> blur. Sometimes mouse gets stuck.
>>> I was able to login once, but GUI freezed, though I was able to move
>>> mouse cursor. After this, my login screen is not at all responsive. It
>>> is showing me two option. reboot or shutdown but I am not able to do
>>> any.
>>>
>>> Till yesterday my F9 works like charm with full yum updates.
>>>
>>> Any help in this regard will be highly appreciated.
>>>
>>
>> Can you do Alt+F2 and login to the console?
>>
>> If you can, install updates and reboot.
>>
>> Also, what hardware -- graphics, motherboard etc?
>>
>> Steve
>>
>> --
>> fedora-list mailing list
>> fedora-list redhat com
>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>> Guidelines:
>> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
>>
>
> --
> fedora-list mailing list
> fedora-list redhat com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
> Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
>


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]