[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Not able to Login to F10



Hi,

Alright, well, let's try this:

In your new xorg file change this:

#Option     "NoAccel"

To:

Option     "NoAccel"

And:

> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     24
> 	EndSubSection

To:

 	SubSection "Display"
 		Viewport   0 0
 		Depth     24
                Virtual 1024 1024
 	EndSubSection

And reload/reboot. Hope it works!

> Hi Steve and Jim,
>                        I was able to boot into shell with run level 3.
> I have already updated my system by doing 'yum update'.
>
> On Thu, Nov 27, 2008 at 5:29 PM, Jim van Wel <jim coolzero info> wrote:
>> Hi there,
>>
>> Got the same issue. Fix was easy.
>>
>> X -configure
>>
>> Makes a xorg.conf file in /etc/X11
> :( It is not creating file in /etc/X11. It creating a file
> '/root/xorg.conf.new' and asking me to test with command:
> X -config <filename>
> Anyway this is not working.
>
> My system's configuration is:
> Graphics Adapter: Intel 82845G
> Monitor:               ViewSonic VE510s
> Motherboard:        Intel D845GVSR
>
> I have collected the log while running 'X -configure'
>
> [...snip...]
> X.Org X Server 1.5.3
> Release Date: 5 November 2008
> X Protocol Version 11, Revision 0
> Build Operating System: Linux 2.6.18-92.1.10.el5 i686
> Current Operating System: Linux localhost.localdomain
> 2.6.27.5-117.fc10.i686 #1 SMP Tue Nov 18 12:19:59 EST 2008 i686
> Build Date: 16 November 2008  08:29:02PM
> Build ID: xorg-x11-server 1.5.3-5.fc10
> 	Before reporting problems, check http://wiki.x.org
> 	to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> 	(++) from command line, (!!) notice, (II) informational,
> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 27 23:27:46 2008
> List of video drivers:
> 	i740
> 	rendition
> 	siliconmotion
> 	voodoo
> 	ati
> 	savage
> 	i810
> 	sis
> 	neomagic
> 	trident
> 	mga
> 	v4l
> 	openchrome
> 	nv
> 	i128
> 	vmware
> 	s3virge
> 	glint
> 	nouveau
> 	ast
> 	cirrus
> 	radeon
> 	tdfx
> 	apm
> 	r128
> 	intel
> 	geode
> 	sisusb
> 	ztv
> 	amd
> 	mach64
> 	dummy
> 	fbdev
> 	vesa
> (++) Using config file: "/root/xorg.conf.new"
>
>
> Xorg detected your mouse at device /dev/input/mice.
> Please check your config if the mouse is still not
> operational, as by default Xorg tries to autodetect
> the protocol.
>
> Your xorg.conf file is /root/xorg.conf.new
>
> To test the server, run 'X -config /root/xorg.conf.new'
>
> [...snip...]
>
>
> Here  I am pasting my working Fedora 9 xorg.conf
>
> [...snip...]
> # Xorg configuration created by system-config-display
>
> Section "ServerLayout"
> 	Identifier     "single head configuration"
> 	Screen      0  "Screen0" 0 0
> 	InputDevice    "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "InputDevice"
>
> # keyboard added by rhpxl
> 	Identifier  "Keyboard0"
> 	Driver      "kbd"
> 	Option	    "XkbModel" "pc105"
> 	Option	    "XkbLayout" "us"
> EndSection
>
> Section "Device"
> 	Identifier  "Videocard0"
> 	Driver      "intel"
> EndSection
>
> Section "Screen"
> 	Identifier "Screen0"
> 	Device     "Videocard0"
> 	DefaultDepth     24
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     24
> 		Modes    "1024x768" "800x600" "640x480"
> 	EndSubSection
> EndSection
>
> [...snip...]
>
>
> Here I am pasting my new Fedora 10 xorg.conf.new file generated by
> running 'X -configure'
>
> [...snip...]
>
> Section "ServerLayout"
> 	Identifier     "X.org Configured"
> 	Screen      0  "Screen0" 0 0
> 	InputDevice    "Mouse0" "CorePointer"
> 	InputDevice    "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> 	ModulePath   "/usr/lib/xorg/modules"
> 	FontPath     "catalogue:/etc/X11/fontpath.d"
> 	FontPath     "built-ins"
> EndSection
>
> Section "Module"
> 	Load  "glx"
> 	Load  "dbe"
> 	Load  "extmod"
> 	Load  "dri"
> EndSection
>
> Section "InputDevice"
> 	Identifier  "Keyboard0"
> 	Driver      "kbd"
> EndSection
>
> Section "InputDevice"
> 	Identifier  "Mouse0"
> 	Driver      "mouse"
> 	Option	    "Protocol" "auto"
> 	Option	    "Device" "/dev/input/mice"
> 	Option	    "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> 	Identifier   "Monitor0"
> 	VendorName   "Monitor Vendor"
> 	ModelName    "Monitor Model"
> EndSection
>
> Section "Device"
>         ### Available Driver options are:-
>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>         ### [arg]: arg optional
>         #Option     "NoAccel"            	# [<bool>]
>         #Option     "SWcursor"           	# [<bool>]
>         #Option     "ColorKey"           	# <i>
>         #Option     "CacheLines"         	# <i>
>         #Option     "Dac6Bit"            	# [<bool>]
>         #Option     "DRI"                	# [<bool>]
>         #Option     "NoDDC"              	# [<bool>]
>         #Option     "ShowCache"          	# [<bool>]
>         #Option     "XvMCSurfaces"       	# <i>
>         #Option     "PageFlip"           	# [<bool>]
> 	Identifier  "Card0"
> 	Driver      "intel"
> 	VendorName  "Intel Corporation"
> 	BoardName   "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics
> Device"
> 	BusID       "PCI:0:2:0"
> EndSection
>
> Section "Screen"
> 	Identifier "Screen0"
> 	Device     "Card0"
> 	Monitor    "Monitor0"
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     1
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     4
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     8
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     15
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     16
> 	EndSubSection
> 	SubSection "Display"
> 		Viewport   0 0
> 		Depth     24
> 	EndSubSection
> EndSection
>
> [...snip...]
>
> Thanks,
> Anoop
>
>>
>> Then try to change some settings like:
>>
>> Option     "NoAccel"
>>
>> Or disable DRI etc...
>>
>> Before you can type these command's you need the console before it
>> crashes
>> to X.
>> You need to single boot the system (or init 3), so in grub, get the
>> line:
>>
>> In grub menu:
>> Type:
>> e
>> and e again on this line:
>> /vmlinuz-2.6.27.5-117.fc10.i686 ro root=UUID=blablabla rhgb single
>>
>> The Enter to save for this moment, and then type "b".
>>
>> If you have a Intel 965 and below chipset, remember, you virtual desktop
>> cannot be larger then 2048X2048 with Acceleration. But it's maybe easyer
>> if you send the hardware information.
>>
>> Good luck!
>>
>> Greetings,
>> Jim.
>>
>>> On Thu, Nov 27, 2008 at 1:52 PM, Anoop <anoop chargotra gmail com>
>>> wrote:
>>>> Hi List,
>>>>           I installed F10 in text mode from F10 DVD. Graphical mode
>>>> was giving issues, like sometimes system was freezing and on other
>>>> occasions I was just able to move the mouse cursor.
>>>> Installation went fine but when booted, I encountered same problem. I
>>>> could not see anything on console, though there was a progress bar at
>>>> the bottom of the screen going from left corner to right corner. I am
>>>> able to see login screen sometimes and on other occasions screen is
>>>> blur. Sometimes mouse gets stuck.
>>>> I was able to login once, but GUI freezed, though I was able to move
>>>> mouse cursor. After this, my login screen is not at all responsive. It
>>>> is showing me two option. reboot or shutdown but I am not able to do
>>>> any.
>>>>
>>>> Till yesterday my F9 works like charm with full yum updates.
>>>>
>>>> Any help in this regard will be highly appreciated.
>>>>
>>>
>>> Can you do Alt+F2 and login to the console?
>>>
>>> If you can, install updates and reboot.
>>>
>>> Also, what hardware -- graphics, motherboard etc?
>>>
>>> Steve
>>>
>>> --
>>> fedora-list mailing list
>>> fedora-list redhat com
>>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>>> Guidelines:
>>> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
>>>
>>
>> --
>> fedora-list mailing list
>> fedora-list redhat com
>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>> Guidelines:
>> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
>>
>


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]