[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Not able to Login to F10



My bad,

I meant for the Virtual line:

Virtual 1024 768

> Hi,
>
> Alright, well, let's try this:
>
> In your new xorg file change this:
>
> #Option     "NoAccel"
>
> To:
>
> Option     "NoAccel"
>
> And:
>
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     24
>> 	EndSubSection
>
> To:
>
>  	SubSection "Display"
>  		Viewport   0 0
>  		Depth     24
>                 Virtual 1024 1024
>  	EndSubSection
>
> And reload/reboot. Hope it works!
>
>> Hi Steve and Jim,
>>                        I was able to boot into shell with run level 3.
>> I have already updated my system by doing 'yum update'.
>>
>> On Thu, Nov 27, 2008 at 5:29 PM, Jim van Wel <jim coolzero info> wrote:
>>> Hi there,
>>>
>>> Got the same issue. Fix was easy.
>>>
>>> X -configure
>>>
>>> Makes a xorg.conf file in /etc/X11
>> :( It is not creating file in /etc/X11. It creating a file
>> '/root/xorg.conf.new' and asking me to test with command:
>> X -config <filename>
>> Anyway this is not working.
>>
>> My system's configuration is:
>> Graphics Adapter: Intel 82845G
>> Monitor:               ViewSonic VE510s
>> Motherboard:        Intel D845GVSR
>>
>> I have collected the log while running 'X -configure'
>>
>> [...snip...]
>> X.Org X Server 1.5.3
>> Release Date: 5 November 2008
>> X Protocol Version 11, Revision 0
>> Build Operating System: Linux 2.6.18-92.1.10.el5 i686
>> Current Operating System: Linux localhost.localdomain
>> 2.6.27.5-117.fc10.i686 #1 SMP Tue Nov 18 12:19:59 EST 2008 i686
>> Build Date: 16 November 2008  08:29:02PM
>> Build ID: xorg-x11-server 1.5.3-5.fc10
>> 	Before reporting problems, check http://wiki.x.org
>> 	to make sure that you have the latest version.
>> Markers: (--) probed, (**) from config file, (==) default setting,
>> 	(++) from command line, (!!) notice, (II) informational,
>> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 27 23:27:46 2008
>> List of video drivers:
>> 	i740
>> 	rendition
>> 	siliconmotion
>> 	voodoo
>> 	ati
>> 	savage
>> 	i810
>> 	sis
>> 	neomagic
>> 	trident
>> 	mga
>> 	v4l
>> 	openchrome
>> 	nv
>> 	i128
>> 	vmware
>> 	s3virge
>> 	glint
>> 	nouveau
>> 	ast
>> 	cirrus
>> 	radeon
>> 	tdfx
>> 	apm
>> 	r128
>> 	intel
>> 	geode
>> 	sisusb
>> 	ztv
>> 	amd
>> 	mach64
>> 	dummy
>> 	fbdev
>> 	vesa
>> (++) Using config file: "/root/xorg.conf.new"
>>
>>
>> Xorg detected your mouse at device /dev/input/mice.
>> Please check your config if the mouse is still not
>> operational, as by default Xorg tries to autodetect
>> the protocol.
>>
>> Your xorg.conf file is /root/xorg.conf.new
>>
>> To test the server, run 'X -config /root/xorg.conf.new'
>>
>> [...snip...]
>>
>>
>> Here  I am pasting my working Fedora 9 xorg.conf
>>
>> [...snip...]
>> # Xorg configuration created by system-config-display
>>
>> Section "ServerLayout"
>> 	Identifier     "single head configuration"
>> 	Screen      0  "Screen0" 0 0
>> 	InputDevice    "Keyboard0" "CoreKeyboard"
>> EndSection
>>
>> Section "InputDevice"
>>
>> # keyboard added by rhpxl
>> 	Identifier  "Keyboard0"
>> 	Driver      "kbd"
>> 	Option	    "XkbModel" "pc105"
>> 	Option	    "XkbLayout" "us"
>> EndSection
>>
>> Section "Device"
>> 	Identifier  "Videocard0"
>> 	Driver      "intel"
>> EndSection
>>
>> Section "Screen"
>> 	Identifier "Screen0"
>> 	Device     "Videocard0"
>> 	DefaultDepth     24
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     24
>> 		Modes    "1024x768" "800x600" "640x480"
>> 	EndSubSection
>> EndSection
>>
>> [...snip...]
>>
>>
>> Here I am pasting my new Fedora 10 xorg.conf.new file generated by
>> running 'X -configure'
>>
>> [...snip...]
>>
>> Section "ServerLayout"
>> 	Identifier     "X.org Configured"
>> 	Screen      0  "Screen0" 0 0
>> 	InputDevice    "Mouse0" "CorePointer"
>> 	InputDevice    "Keyboard0" "CoreKeyboard"
>> EndSection
>>
>> Section "Files"
>> 	ModulePath   "/usr/lib/xorg/modules"
>> 	FontPath     "catalogue:/etc/X11/fontpath.d"
>> 	FontPath     "built-ins"
>> EndSection
>>
>> Section "Module"
>> 	Load  "glx"
>> 	Load  "dbe"
>> 	Load  "extmod"
>> 	Load  "dri"
>> EndSection
>>
>> Section "InputDevice"
>> 	Identifier  "Keyboard0"
>> 	Driver      "kbd"
>> EndSection
>>
>> Section "InputDevice"
>> 	Identifier  "Mouse0"
>> 	Driver      "mouse"
>> 	Option	    "Protocol" "auto"
>> 	Option	    "Device" "/dev/input/mice"
>> 	Option	    "ZAxisMapping" "4 5 6 7"
>> EndSection
>>
>> Section "Monitor"
>> 	Identifier   "Monitor0"
>> 	VendorName   "Monitor Vendor"
>> 	ModelName    "Monitor Model"
>> EndSection
>>
>> Section "Device"
>>         ### Available Driver options are:-
>>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>>         ### [arg]: arg optional
>>         #Option     "NoAccel"            	# [<bool>]
>>         #Option     "SWcursor"           	# [<bool>]
>>         #Option     "ColorKey"           	# <i>
>>         #Option     "CacheLines"         	# <i>
>>         #Option     "Dac6Bit"            	# [<bool>]
>>         #Option     "DRI"                	# [<bool>]
>>         #Option     "NoDDC"              	# [<bool>]
>>         #Option     "ShowCache"          	# [<bool>]
>>         #Option     "XvMCSurfaces"       	# <i>
>>         #Option     "PageFlip"           	# [<bool>]
>> 	Identifier  "Card0"
>> 	Driver      "intel"
>> 	VendorName  "Intel Corporation"
>> 	BoardName   "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics
>> Device"
>> 	BusID       "PCI:0:2:0"
>> EndSection
>>
>> Section "Screen"
>> 	Identifier "Screen0"
>> 	Device     "Card0"
>> 	Monitor    "Monitor0"
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     1
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     4
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     8
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     15
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     16
>> 	EndSubSection
>> 	SubSection "Display"
>> 		Viewport   0 0
>> 		Depth     24
>> 	EndSubSection
>> EndSection
>>
>> [...snip...]
>>
>> Thanks,
>> Anoop
>>
>>>
>>> Then try to change some settings like:
>>>
>>> Option     "NoAccel"
>>>
>>> Or disable DRI etc...
>>>
>>> Before you can type these command's you need the console before it
>>> crashes
>>> to X.
>>> You need to single boot the system (or init 3), so in grub, get the
>>> line:
>>>
>>> In grub menu:
>>> Type:
>>> e
>>> and e again on this line:
>>> /vmlinuz-2.6.27.5-117.fc10.i686 ro root=UUID=blablabla rhgb single
>>>
>>> The Enter to save for this moment, and then type "b".
>>>
>>> If you have a Intel 965 and below chipset, remember, you virtual
>>> desktop
>>> cannot be larger then 2048X2048 with Acceleration. But it's maybe
>>> easyer
>>> if you send the hardware information.
>>>
>>> Good luck!
>>>
>>> Greetings,
>>> Jim.
>>>
>>>> On Thu, Nov 27, 2008 at 1:52 PM, Anoop <anoop chargotra gmail com>
>>>> wrote:
>>>>> Hi List,
>>>>>           I installed F10 in text mode from F10 DVD. Graphical mode
>>>>> was giving issues, like sometimes system was freezing and on other
>>>>> occasions I was just able to move the mouse cursor.
>>>>> Installation went fine but when booted, I encountered same problem. I
>>>>> could not see anything on console, though there was a progress bar at
>>>>> the bottom of the screen going from left corner to right corner. I am
>>>>> able to see login screen sometimes and on other occasions screen is
>>>>> blur. Sometimes mouse gets stuck.
>>>>> I was able to login once, but GUI freezed, though I was able to move
>>>>> mouse cursor. After this, my login screen is not at all responsive.
>>>>> It
>>>>> is showing me two option. reboot or shutdown but I am not able to do
>>>>> any.
>>>>>
>>>>> Till yesterday my F9 works like charm with full yum updates.
>>>>>
>>>>> Any help in this regard will be highly appreciated.
>>>>>
>>>>
>>>> Can you do Alt+F2 and login to the console?
>>>>
>>>> If you can, install updates and reboot.
>>>>
>>>> Also, what hardware -- graphics, motherboard etc?
>>>>
>>>> Steve
>>>>
>>>> --
>>>> fedora-list mailing list
>>>> fedora-list redhat com
>>>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>>>> Guidelines:
>>>> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
>>>>
>>>
>>> --
>>> fedora-list mailing list
>>> fedora-list redhat com
>>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>>> Guidelines:
>>> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
>>>
>>
>
>


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]