[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Not able to Login to F10



On Thu, Nov 27, 2008 at 6:48 PM, Jim van Wel <jim coolzero info> wrote:
> My bad,
>
> I meant for the Virtual line:
>
> Virtual 1024 768
>
>> Hi,
>>
>> Alright, well, let's try this:
>>
>> In your new xorg file change this:
>>
>> #Option     "NoAccel"
>>
>> To:
>>
>> Option     "NoAccel"
>>
>> And:
>>
>>>      SubSection "Display"
>>>              Viewport   0 0
>>>              Depth     24
>>>      EndSubSection
>>
>> To:
>>
>>       SubSection "Display"
>>               Viewport   0 0
>>               Depth     24
>>                 Virtual 1024 1024
>>       EndSubSection
Hi Guys,
             Thanks a lot.. KDE looks cool. Will explore other feature
now. Once again thanks a lot.

-Anoop

>>
>> And reload/reboot. Hope it works!
>>
>>> Hi Steve and Jim,
>>>                        I was able to boot into shell with run level 3.
>>> I have already updated my system by doing 'yum update'.
>>>
>>> On Thu, Nov 27, 2008 at 5:29 PM, Jim van Wel <jim coolzero info> wrote:
>>>> Hi there,
>>>>
>>>> Got the same issue. Fix was easy.
>>>>
>>>> X -configure
>>>>
>>>> Makes a xorg.conf file in /etc/X11
>>> :( It is not creating file in /etc/X11. It creating a file
>>> '/root/xorg.conf.new' and asking me to test with command:
>>> X -config <filename>
>>> Anyway this is not working.
>>>
>>> My system's configuration is:
>>> Graphics Adapter: Intel 82845G
>>> Monitor:               ViewSonic VE510s
>>> Motherboard:        Intel D845GVSR
>>>
>>> I have collected the log while running 'X -configure'
>>>
>>> [...snip...]
>>> X.Org X Server 1.5.3
>>> Release Date: 5 November 2008
>>> X Protocol Version 11, Revision 0
>>> Build Operating System: Linux 2.6.18-92.1.10.el5 i686
>>> Current Operating System: Linux localhost.localdomain
>>> 2.6.27.5-117.fc10.i686 #1 SMP Tue Nov 18 12:19:59 EST 2008 i686
>>> Build Date: 16 November 2008  08:29:02PM
>>> Build ID: xorg-x11-server 1.5.3-5.fc10
>>>      Before reporting problems, check http://wiki.x.org
>>>      to make sure that you have the latest version.
>>> Markers: (--) probed, (**) from config file, (==) default setting,
>>>      (++) from command line, (!!) notice, (II) informational,
>>>      (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>>> (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 27 23:27:46 2008
>>> List of video drivers:
>>>      i740
>>>      rendition
>>>      siliconmotion
>>>      voodoo
>>>      ati
>>>      savage
>>>      i810
>>>      sis
>>>      neomagic
>>>      trident
>>>      mga
>>>      v4l
>>>      openchrome
>>>      nv
>>>      i128
>>>      vmware
>>>      s3virge
>>>      glint
>>>      nouveau
>>>      ast
>>>      cirrus
>>>      radeon
>>>      tdfx
>>>      apm
>>>      r128
>>>      intel
>>>      geode
>>>      sisusb
>>>      ztv
>>>      amd
>>>      mach64
>>>      dummy
>>>      fbdev
>>>      vesa
>>> (++) Using config file: "/root/xorg.conf.new"
>>>
>>>
>>> Xorg detected your mouse at device /dev/input/mice.
>>> Please check your config if the mouse is still not
>>> operational, as by default Xorg tries to autodetect
>>> the protocol.
>>>
>>> Your xorg.conf file is /root/xorg.conf.new
>>>
>>> To test the server, run 'X -config /root/xorg.conf.new'
>>>
>>> [...snip...]
>>>
>>>
>>> Here  I am pasting my working Fedora 9 xorg.conf
>>>
>>> [...snip...]
>>> # Xorg configuration created by system-config-display
>>>
>>> Section "ServerLayout"
>>>      Identifier     "single head configuration"
>>>      Screen      0  "Screen0" 0 0
>>>      InputDevice    "Keyboard0" "CoreKeyboard"
>>> EndSection
>>>
>>> Section "InputDevice"
>>>
>>> # keyboard added by rhpxl
>>>      Identifier  "Keyboard0"
>>>      Driver      "kbd"
>>>      Option      "XkbModel" "pc105"
>>>      Option      "XkbLayout" "us"
>>> EndSection
>>>
>>> Section "Device"
>>>      Identifier  "Videocard0"
>>>      Driver      "intel"
>>> EndSection
>>>
>>> Section "Screen"
>>>      Identifier "Screen0"
>>>      Device     "Videocard0"
>>>      DefaultDepth     24
>>>      SubSection "Display"
>>>              Viewport   0 0
>>>              Depth     24
>>>              Modes    "1024x768" "800x600" "640x480"
>>>      EndSubSection
>>> EndSection
>>>
>>> [...snip...]
>>>
>>>
>>> Here I am pasting my new Fedora 10 xorg.conf.new file generated by
>>> running 'X -configure'
>>>
>>> [...snip...]
>>>
>>> Section "ServerLayout"
>>>      Identifier     "X.org Configured"
>>>      Screen      0  "Screen0" 0 0
>>>      InputDevice    "Mouse0" "CorePointer"
>>>      InputDevice    "Keyboard0" "CoreKeyboard"
>>> EndSection
>>>
>>> Section "Files"
>>>      ModulePath   "/usr/lib/xorg/modules"
>>>      FontPath     "catalogue:/etc/X11/fontpath.d"
>>>      FontPath     "built-ins"
>>> EndSection
>>>
>>> Section "Module"
>>>      Load  "glx"
>>>      Load  "dbe"
>>>      Load  "extmod"
>>>      Load  "dri"
>>> EndSection
>>>
>>> Section "InputDevice"
>>>      Identifier  "Keyboard0"
>>>      Driver      "kbd"
>>> EndSection
>>>
>>> Section "InputDevice"
>>>      Identifier  "Mouse0"
>>>      Driver      "mouse"
>>>      Option      "Protocol" "auto"
>>>      Option      "Device" "/dev/input/mice"
>>>      Option      "ZAxisMapping" "4 5 6 7"
>>> EndSection
>>>
>>> Section "Monitor"
>>>      Identifier   "Monitor0"
>>>      VendorName   "Monitor Vendor"
>>>      ModelName    "Monitor Model"
>>> EndSection
>>>
>>> Section "Device"
>>>         ### Available Driver options are:-
>>>         ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
>>>         ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
>>>         ### [arg]: arg optional
>>>         #Option     "NoAccel"                # [<bool>]
>>>         #Option     "SWcursor"               # [<bool>]
>>>         #Option     "ColorKey"               # <i>
>>>         #Option     "CacheLines"             # <i>
>>>         #Option     "Dac6Bit"                # [<bool>]
>>>         #Option     "DRI"                    # [<bool>]
>>>         #Option     "NoDDC"                  # [<bool>]
>>>         #Option     "ShowCache"              # [<bool>]
>>>         #Option     "XvMCSurfaces"           # <i>
>>>         #Option     "PageFlip"               # [<bool>]
>>>      Identifier  "Card0"
>>>      Driver      "intel"
>>>      VendorName  "Intel Corporation"
>>>      BoardName   "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics
>>> Device"
>>>      BusID       "PCI:0:2:0"
>>> EndSection
>>>
>>> Section "Screen"
>>>      Identifier "Screen0"
>>>      Device     "Card0"
>>>      Monitor    "Monitor0"
>>>      SubSection "Display"
>>>              Viewport   0 0
>>>              Depth     1
>>>      EndSubSection
>>>      SubSection "Display"
>>>              Viewport   0 0
>>>              Depth     4
>>>      EndSubSection
>>>      SubSection "Display"
>>>              Viewport   0 0
>>>              Depth     8
>>>      EndSubSection
>>>      SubSection "Display"
>>>              Viewport   0 0
>>>              Depth     15
>>>      EndSubSection
>>>      SubSection "Display"
>>>              Viewport   0 0
>>>              Depth     16
>>>      EndSubSection
>>>      SubSection "Display"
>>>              Viewport   0 0
>>>              Depth     24
>>>      EndSubSection
>>> EndSection
>>>
>>> [...snip...]
>>>
>>> Thanks,
>>> Anoop
>>>
>>>>
>>>> Then try to change some settings like:
>>>>
>>>> Option     "NoAccel"
>>>>
>>>> Or disable DRI etc...
>>>>
>>>> Before you can type these command's you need the console before it
>>>> crashes
>>>> to X.
>>>> You need to single boot the system (or init 3), so in grub, get the
>>>> line:
>>>>
>>>> In grub menu:
>>>> Type:
>>>> e
>>>> and e again on this line:
>>>> /vmlinuz-2.6.27.5-117.fc10.i686 ro root=UUID=blablabla rhgb single
>>>>
>>>> The Enter to save for this moment, and then type "b".
>>>>
>>>> If you have a Intel 965 and below chipset, remember, you virtual
>>>> desktop
>>>> cannot be larger then 2048X2048 with Acceleration. But it's maybe
>>>> easyer
>>>> if you send the hardware information.
>>>>
>>>> Good luck!
>>>>
>>>> Greetings,
>>>> Jim.
>>>>
>>>>> On Thu, Nov 27, 2008 at 1:52 PM, Anoop <anoop chargotra gmail com>
>>>>> wrote:
>>>>>> Hi List,
>>>>>>           I installed F10 in text mode from F10 DVD. Graphical mode
>>>>>> was giving issues, like sometimes system was freezing and on other
>>>>>> occasions I was just able to move the mouse cursor.
>>>>>> Installation went fine but when booted, I encountered same problem. I
>>>>>> could not see anything on console, though there was a progress bar at
>>>>>> the bottom of the screen going from left corner to right corner. I am
>>>>>> able to see login screen sometimes and on other occasions screen is
>>>>>> blur. Sometimes mouse gets stuck.
>>>>>> I was able to login once, but GUI freezed, though I was able to move
>>>>>> mouse cursor. After this, my login screen is not at all responsive.
>>>>>> It
>>>>>> is showing me two option. reboot or shutdown but I am not able to do
>>>>>> any.
>>>>>>
>>>>>> Till yesterday my F9 works like charm with full yum updates.
>>>>>>
>>>>>> Any help in this regard will be highly appreciated.
>>>>>>
>>>>>
>>>>> Can you do Alt+F2 and login to the console?
>>>>>
>>>>> If you can, install updates and reboot.
>>>>>
>>>>> Also, what hardware -- graphics, motherboard etc?
>>>>>
>>>>> Steve
>>>>>
>>>>> --
>>>>> fedora-list mailing list
>>>>> fedora-list redhat com
>>>>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>>>>> Guidelines:
>>>>> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
>>>>>
>>>>
>>>> --
>>>> fedora-list mailing list
>>>> fedora-list redhat com
>>>> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
>>>> Guidelines:
>>>> http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
>>>>
>>>
>>
>>
>
>


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]