[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Fedora 10 Live CD hangs at boot



Konstantin Svist wrote:
> Antonio Olivares wrote:
>   
>> --- On Fri, 11/28/08, Konstantin Svist <fry kun gmail com> wrote:
>>
>>   
>>     
>>> From: Konstantin Svist <fry kun gmail com>
>>> Subject: Fedora 10 Live CD hangs at boot
>>> To: "Community assistance, encouragement, and advice for using Fedora." <fedora-list redhat com>
>>> Date: Friday, November 28, 2008, 11:01 PM
>>> Hi all,
>>>
>>> I just downloaded a copy of F10 x86_64 Live KDE CD.
>>> When trying to start on a newly-built computer, it gets
>>> into X (I can
>>> move the mouse) and a progress bar goes up. At some point,
>>> though, the
>>> computer freezes and I can't do anything but reboot at
>>> that point.
>>>
>>> CPU: q6600
>>> Mobo: Asus P5N7A-VM
>>> Video: ATI X800 GT
>>>
>>> I've tried using the internal video card, but
>>> Xorg.0.log says the card
>>> is unsupported (it's some nVidia with shared RAM)
>>> I've tried disconnecting the hard drive - didn't
>>> help, either.
>>>
>>> What else can I do?
>>>
>>> -- 
>>>     
>>>       
>> You have the same problems as me :(
>> I blacklisted r8169 module in /etc/modprobe.d/blacklist file, but still my machine runs for a while and then suddenly freezes with no apparent reason :(  It is an asus motherboard with integrated video on the motherboard, here's lspci
>>
>> 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge
>> 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx)
>> 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3)
>> 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA
>> 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0)
>> 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1)
>> 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2)
>> 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3)
>> 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4)
>> 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI)
>> 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 13)
>> 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE
>> 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia
>> 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge
>> 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
>> 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
>> 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
>> 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
>> 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
>> 01:05.0 VGA compatible controller: ATI Technologies Inc RS690 [Radeon X1200 Series]
>> 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
>> 03:06.0 Modem: Smart Link Ltd. SmartLink SmartPCI562 56K Modem (rev 04)
>>
>> What is your lspci, is it about the same as this one?
>>
>> Regards,
>>
>> Antonio 
>>
>>   
>>     
>
> I've tried to blacklist r8169 but that did nothing..
>
> Here's my lspci:
>
> 00:00.0 Host bridge: nVidia Corporation Device 0a80 (rev b1)
> 00:00.1 RAM memory: nVidia Corporation Device 0a88 (rev b1)
> 00:03.0 ISA bridge: nVidia Corporation Device 0aac (rev b2)
> 00:03.1 RAM memory: nVidia Corporation Device 0aa4 (rev b1)
> 00:03.2 SMBus: nVidia Corporation Device 0aa2 (rev b1)
> 00:03.3 RAM memory: nVidia Corporation Device 0a89 (rev b1)
> 00:03.4 RAM memory: nVidia Corporation Device 0a98 (rev b1)
> 00:03.5 Co-processor: nVidia Corporation Device 0aa3 (rev b1)
> 00:04.0 USB Controller: nVidia Corporation Device 0aa5 (rev b1)
> 00:04.1 USB Controller: nVidia Corporation Device 0aa6 (rev b1)
> 00:06.0 USB Controller: nVidia Corporation Device 0aa7 (rev b1)
> 00:06.1 USB Controller: nVidia Corporation Device 0aa9 (rev b1)
> 00:08.0 Audio device: nVidia Corporation Device 0ac0 (rev b1)
> 00:09.0 PCI bridge: nVidia Corporation Device 0aab (rev b1)
> 00:0a.0 Ethernet controller: nVidia Corporation Device 0ab0 (rev b1)
> 00:0b.0 IDE interface: nVidia Corporation Device 0ab4 (rev b1)
> 00:0c.0 PCI bridge: nVidia Corporation Device 0ac4 (rev b1)
> 00:15.0 PCI bridge: nVidia Corporation Device 0ac6 (rev b1)
> 00:16.0 PCI bridge: nVidia Corporation Device 0ac7 (rev b1)
> 02:00.0 VGA compatible controller: ATI Technologies Inc R423 UI [Radeon
> X800PRO (PCIE)]
> 02:00.1 Display controller: ATI Technologies Inc R423 UI [Radeon X800PRO
> (PCIE)] (Secondary)
> 04:00.0 IDE interface: JMicron Technologies, Inc. JMB368 IDE controller
>
>
>
> Thanks,
> Konstantin
>
>
>   


Update:
I went ahead and did a textinstall - the system boots to login prompt,
but after accepting the password the behavior is the same as it was
earlier (progress bar goes up until 80% and system freezes)
Also tried with i686 Live KDE CD - same results




[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]