[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Fwd: FC9 Network Config]



Olteanu Eugen wrote:
I dont get it! Why would udev rename/change the name of swap???
As for the nics.. check if there is any interrupt on your main board. cat /proc/interrupts
How many NICs with your motherboard ?
On Thu, Oct 2, 2008 at 2:36 PM, <edwardspl ita org mo> wrote:
Hello to you,

Would you mind to help as the following questions ?

1, How to modify /etc/udev/rules.d/70-persistent-net.rules, then prevent
the udev service to change ( rename / swap ) the name of device ( eg :
eth?? ) ?

# This file was automatically generated by the /lib/udev/write_net_rules
# program run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single line.

# Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rule written by
anaconda)
SUBSYSTEM=="net", ACTION="" DRIVERS=="?*",
ATTR{address}=="10:e0:8c:39:8f:48", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth2"
# Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rule written by
anaconda)
SUBSYSTEM=="net", ACTION="" DRIVERS=="?*",
ATTR{address}=="00:02:44:6c:66:49", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth1"
# Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit
Ethernet controller (rule written by anaconda)
SUBSYSTEM=="net", ACTION="" DRIVERS=="?*",
ATTR{address}=="00:1e:8c:7e:2f:58", ATTR{type}=="1", KERNEL=="eth*",
NAME="eth0"

2, After FC9 version, how to modify ( update ) the NIC config ( driver )
in text mode ?
( eg : Due to the current NIC just bad, so replace with another new one,
or add one more NIC for controling another network segment )

3, During the installation of FC, without which items, then the services
of NetworkManager won't be installed ?

Thanks

Edward.

For the point of 2 and 3, any suggestion / solution for me ?

Thanks !

Edward.

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]