[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: IPV6INIT=no, but does anyway on local network

On Saturday 04 October 2008, edwardspl ita org mo wrote:
>After FC8 System, there is no /etc/modprobe.conf ( default hand by
>system ), the user may use the GUI ( NOT text mode ) tool or modify
>ifcfg-eth* file for it...

What the ????  Says he incredulously.  Howinhell am I supposed to be able to 
use 2 sound cards, in the reverse order from discovery?

I normally assign the mobo audio to private use, like skype, and have an 
Audigy2 Value (SB0400) card that does all the main audio here.  To do that, 
here is my F8 modprobe.conf:

alias scsi_hostadapter libata
alias scsi_hostadapter1 sata_sil
alias scsi_hostadapter2 pata_amd
Humm, I could reverse that and put my drives back in the same order as they 
were before... But that wouldn't fix grub. :(  LABEL's make it work anyway.

The audio stuff:
alias snd-card-0 snd-emu10k1
alias snd-card-1 snd-hda-intel
options snd-hda-intel index=1
options snd-emu10k1 index=0
options snd-intel8x0 index=2
options snd-mpu401 index=3

alias eth0 forcedeth

How am I to effect this same setup for F10 when it is out?  That would be a 
total show stopper for me if I cannot.

>Ian Pilcher wrote:
>>Gene Heskett wrote:
>>>How does one go about disabling that?
>>It's not easy.  The Linux kernel automatically assigns a link-local IPv6
>>address to any interface that's brought up.  If you don't want to use
>>IPv6 at all, you can use /etc/modprobe.conf to prevent the appropriate
>>module from being loaded.  (ISTR that it used to be called net-pf-10,
>>but that module doesn't seem to exist anymore; I'd try disabling the
>>ipv6 module.)
>>To get rid of the IPv6 address on a particular interface, you should be
>>able to use some variation of 'ip addr ...'.
>>The only way I know of to prevent the kernel from assigning an address
>>when an interface is brought up is to set the MTU to a ridiculously low
>>value before bringing the interface up.  If the MTU is too low for IPv6
>>to work, the kernel won't assign the address.  Once the interface is up,
>>you can set the MTU back to what you want and assign an IPv4 address (if
>>desired).  Needless to say, this is an ugly hack, and it's not supported
>>by the networking scripts.

Cheers, Gene
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Bad men live that they may eat and drink, whereas good men eat and drink
that they may live.
		-- Socrates

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]