[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [Fwd: FC9 Network Config]



On Mon, 2008-10-06 at 00:09 +0800, edwardspl ita org mo wrote:
> Dear All,
> 
> How can we enable the services of "syslog-ng" and "sysstat" in FC9
> Text mode ?
> 
> Thanks,
> 
> Edward.
Using the chkconfig command
> 
> Olteanu Eugen wrote: 
> > Ok you dont seem to have any problem with your modules..so you dont
> > need to modify anything in modprobe.conf. This means your network is
> > fine..
> > 
> > The ntsysv tools shows a list of services that are off or on at a
> > normal reboot. Depending on what you use that computer for you might
> > have more servers "on".
> > 
> > Here are the ones that I have "on":
> > 
> > acpid
> > avahi-daemon
> > cpuspeed
> > crond
> > gpm 
> > haldaemon
> > httpd 
> > iptables
> > irqbalance
> > mdmonitor
> > messagebus
> > mysqld
> > network
> > sshd
> > syslog-ng
> > sysstat
> > xinetd
> > 
> > Also you should know that if you have a graphical machine
> > (kde/gnome) then you are in lvl 5. If you boot in text mode you are
> > in lvl 3.
> > So I have all those services on in lvl 5. If you switch to lvl 3
> > there might be others on.
> > 
> > 
> > 
> > On Wed, Oct 1, 2008 at 3:20 PM, <edwardspl ita org mo> wrote:
> >         Hello,
> >         
> >         Sorry,
> >         My means is "What service must be started-up by using ntsysv
> >         command line ?"
> >         Then the tool of "system-config-network" is good for work ?
> >         
> >         BTW:
> >         [root svr1 ~]# /etc/rc.d/init.d/network restart
> >         Shutting down interface eth0:                              [
> >         OK  ]
> >         Shutting down interface eth1:                              [
> >         OK  ]
> >         Shutting down loopback interface:                          [
> >         OK  ]
> >         Bringing up loopback interface:                            [
> >         OK  ]
> >         Bringing up interface eth0:                                [
> >         OK  ]
> >         Bringing up interface eth1:                                [
> >         OK  ]
> >         [root svr1 ~]# 
> >         
> >         
> >         Thanks.
> >         
> >         Edward.
> >         
> >         Olteanu Eugen wrote:
> >         > You dont need to stop anything..   What
> >         > does : /etc/init.d/network start say?
> >         > 
> >         > On Wed, Oct 1, 2008 at 2:12 PM, <edwardspl ita org mo>
> >         > wrote:
> >         >         Hello,
> >         >         
> >         >         Would you mind to tell me may be I have stop which
> >         >         startup services by ntsysv ?
> >         >         Then the system-config-network can't be good for
> >         >         work ? 
> >         >         
> >         >         
> >         >         Thanks !
> >         >         
> >         >         Edward.
> >         >         
> >         >         Olteanu Eugen wrote:
> >         >         > 
> >         >         > Probably you broke smth in  there.. try to
> >         >         > remove those 2 packets and then install them
> >         >         > again  via yum.
> >         >         > 
> >         >         > 
> >         >         > 
> >         >         > 
> >         >         > On Wed, Oct 1, 2008 at 2:03 PM,
> >         >         > <edwardspl ita org mo> wrote:
> >         >         >         Hello,
> >         >         >         
> >         >         >         Just running the tools :
> >         >         >         
> >         >         >         Error in sys.excepthook:
> >         >         >                                 Traceback (most
> >         >         >         recent call last):
> >         >         >         
> >         >         >         File
> >         >         >         "/usr/sbin/system-config-network-tui",
> >         >         >         line 120, in <lambda>
> >         >         >         
> >         >         >         PRG_NAME, PRG_VERSION)
> >         >         >         
> >         >         >         File
> >         >         >         "/usr/share/system-config-network/netconfpkg/exception.py", line 332, in handleException
> >         >         >                   import gtk
> >         >         >                               File
> >         >         >         "/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py", line 79, in <module>
> >         >         >                                        _init()
> >         >         >         
> >         >         >         File
> >         >         >         "/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py", line 67, in _init
> >         >         >         
> >         >         >         _gtk.init_check()
> >         >         >         
> >         >         >         RuntimeError: could not open display
> >         >         >         
> >         >         >                            Original exception
> >         >         >         was:
> >         >         >         
> >         >         >         Traceback (most recent call last):
> >         >         >         
> >         >         >         File
> >         >         >         "/usr/sbin/system-config-network-tui",
> >         >         >         line 277, in <module>
> >         >         >         
> >         >         >         plist = getProfileList()
> >         >         >                      File
> >         >         >         "/usr/share/system-config-network/netconfpkg/NCProfileList.py", line 651, in getProfileList
> >         >         >         
> >         >         >         __PFList.load()
> >         >         >         
> >         >         >         File
> >         >         >         "/usr/share/system-config-network/netconfpkg/NCProfileList.py", line 88, in load
> >         >         >         
> >         >         >         self.loadprof(pr, profdir)
> >         >         >                                File
> >         >         >         "/usr/share/system-config-network/netconfpkg/NCProfileList.py", line 101, in loadprof
> >         >         >         
> >         >         >         devicelist =
> >         >         >         NCDeviceList.getDeviceList()
> >         >         >         
> >         >         >         File
> >         >         >         "/usr/share/system-config-network/netconfpkg/NCDeviceList.py", line 318, in getDeviceList
> >         >         >                           __DVList.load()
> >         >         >                                            File
> >         >         >         "/usr/share/system-config-network/netconfpkg/NCDeviceList.py", line 78, in load
> >         >         >         
> >         >         >         hwlist =
> >         >         >         NCHardwareList.getHardwareList()
> >         >         >               File
> >         >         >         "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 759, in getHardwareList
> >         >         >         
> >         >         >         __HWList.load()
> >         >         >         
> >         >         >         File
> >         >         >         "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 603, in load
> >         >         >         
> >         >         >         self.updateFromSystem()
> >         >         >         
> >         >         >         File
> >         >         >         "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 483, in updateFromSystem
> >         >         >         
> >         >         >         self.updateFromHal(hdellist)
> >         >         >         
> >         >         >         File
> >         >         >         "/usr/share/system-config-network/netconfpkg/NCHardwareList.py", line 447, in updateFromHal
> >         >         >         
> >         >         >         hal = NCBackendHal.NCBackendHal()
> >         >         >                                      File
> >         >         >         "/usr/share/system-config-network/netconfpkg/NCBackendHal.py", line 30, in __init__
> >         >         >         
> >         >         >         self._dbusBus = dbus.SystemBus()
> >         >         >         
> >         >         >         File
> >         >         >         "/usr/lib/python2.5/site-packages/dbus/_dbus.py", line 200, in __new__
> >         >         >         
> >         >         >         private=private)
> >         >         >                     File
> >         >         >         "/usr/lib/python2.5/site-packages/dbus/_dbus.py", line 106, in __new__
> >         >         >                    bus =
> >         >         >         BusConnection.__new__(subclass,
> >         >         >         bus_type, mainloop=mainloop)
> >         >         >         
> >         >         >         File
> >         >         >         "/usr/lib/python2.5/site-packages/dbus/bus.py", line 125, in __new__
> >         >         >         
> >         >         >         bus = cls._new_for_bus(address_or_type,
> >         >         >         mainloop=mainloop)
> >         >         >         
> >         >         >         dbus.exceptions.DBusException:
> >         >         >         org.freedesktop.DBus.Error.FileNotFound:
> >         >         >         Failed to connect to
> >         >         >         socket /var/run/dbus/system_bus_socket:
> >         >         >         No such file or directory
> >         >         >         
> >         >         >         [root svr1 ~]#
> >         >         >         
> >         >         >         And the tools seem hang....
> >         >         >         
> >         >         >         Any solution for fixing this problems ? 
> >         >         >         
> >         >         >         
> >         >         >         Thanks !
> >         >         >         
> >         >         >         Edward.
> >         >         >         
> >         >         >         Olteanu Eugen wrote:
> >         >         >         > Launch : system-config-network-tui
> >         >         >         > 
> >         >         >         > On Wed, Oct 1, 2008 at 1:57 PM,
> >         >         >         > <edwardspl ita org mo> wrote:
> >         >         >         >         Hello,
> >         >         >         >         
> >         >         >         >         Just checked the default
> >         >         >         >         system :
> >         >         >         >         
> >         >         >         >         [root svr1 ~]# rpm -qa | grep
> >         >         >         >         "system-config-network"
> >         >         >         >         system-config-network-tui-1.5.7-1.fc9.noarch
> >         >         >         >         system-config-network-1.5.7-1.fc9.noarch
> >         >         >         >         [root svr1 ~]#
> >         >         >         >         
> >         >         >         >         So, what else I can do it ?
> >         >         >         >         
> >         >         >         >         Thanks
> >         >         >         >         
> >         >         >         >         Edward 
> >         >         >         >         
> >         >         >         >         
> >         >         >         >         Olteanu Eugen wrote:
> >         >         >         >         > yum install
> >         >         >         >         > system-config-network.noarch
> >         >         >         >         > system-config-network-tui.noarch
> >         >         >         >         > 
> >         >         >         >         > Then launch
> >         >         >         >         > system-config-network-tui.
> >         >         >         >         > 
> >         >         >         >         > 
> >         >         >         >         > On Wed, Oct 1, 2008 at 1:46
> >         >         >         >         > PM, <edwardspl ita org mo>
> >         >         >         >         > wrote:
> >         >         >         >         >         Timothy Murphy
> >         >         >         >         >         wrote:
> >         >         >         >         >         > edwardspl ita org mo wrote:
> >         >         >         >         >         > 
> >         >         >         >         >         >   
> >         >         >         >         >         > > After the installation of FC9...
> >         >         >         >         >         > > I can't running the tool of "system-config-network" for configuring the
> >         >         >         >         >         > > network setting...
> >         >         >         >         >         > >     
> >         >         >         >         >         > ...
> >         >         >         >         >         >   
> >         >         >         >         >         > > For text mode....
> >         >         >         >         >         > > How can we config the setting of Networking ?
> >         >         >         >         >         > > 
> >         >         >         >         >         > > I can modify the ifcfg-ethxxx files, but can't ti find out the
> >         >         >         >         >         > > modprobe.conf file...
> >         >         >         >         >         > > 
> >         >         >         >         >         > > Any more help ?
> >         >         >         >         >         > >     
> >         >         >         >         >         > I'm no expert, but I doubt if you are giving enough information
> >         >         >         >         >         > for any expert to help.
> >         >         >         >         >         > Eg are you running NetworkManager
> >         >         >         >         >         > ("chkconfig --list | grep -i net")
> >         >         >         >         >         > What do you mean by "I cannot run system-config-network"?
> >         >         >         >         >         > What actually happens if you do try to run it?
> >         >         >         >         >         > Etc
> >         >         >         >         >         >   
> >         >         >         >         >         Hello,
> >         >         >         >         >         
> >         >         >         >         >         [root svr1 ~]#
> >         >         >         >         >         chkconfig --list |
> >         >         >         >         >         grep -i net
> >         >         >         >         >         NetworkManager
> >         >         >         >         >         0:off   1:off   2:on
> >         >         >         >         >         3:on    4:on    5:on
> >         >         >         >         >         6:on
> >         >         >         >         >         netconsole
> >         >         >         >         >         0:off   1:off
> >         >         >         >         >         2:off   3:on
> >         >         >         >         >         4:off   5:off   6:on
> >         >         >         >         >         netfs
> >         >         >         >         >         0:off   1:off
> >         >         >         >         >         2:off   3:off   4:on
> >         >         >         >         >         5:on    6:off
> >         >         >         >         >         netplugd
> >         >         >         >         >         0:off   1:off
> >         >         >         >         >         2:off   3:off
> >         >         >         >         >         4:off   5:off
> >         >         >         >         >         6:off
> >         >         >         >         >         network
> >         >         >         >         >         0:off   1:off
> >         >         >         >         >         2:off   3:on
> >         >         >         >         >         4:off   5:off   6:on
> >         >         >         >         >         [root svr1 ~]#
> >         >         >         >         >         
> >         >         >         >         >         So, which services
> >         >         >         >         >         musted be started up
> >         >         >         >         >         and which packages
> >         >         >         >         >         must be installed,
> >         >         >         >         >         then we can use
> >         >         >         >         >         system-config-network ?
> >         >         >         >         >         
> >         >         >         >         >         Thanks !
> >         >         >         >         >         
> >         >         >         >         >         Edward.
> >         >         >         >         >         
> >         >         >         >         >         
> >         >         >         >         >         --
> >         >         >         >         >         fedora-list mailing
> >         >         >         >         >         list
> >         >         >         >         >         fedora-list redhat com
> >         >         >         >         >         To unsubscribe:
> >         >         >         >         >         https://www.redhat.com/mailman/listinfo/fedora-list
> >         >         >         >         >         Guidelines:
> >         >         >         >         >         http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
> >         >         >         >         > 
> >         >         >         >         > 
> >         >         >         > 
> >         >         >         > 
> >         >         > 
> >         >         > 
> >         > 
> >         > 
> > 
> > 
> -- 
> fedora-list mailing list
> fedora-list redhat com
> To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
> Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
--
=======================================================================
If you don't do the things that are not worth doing, who will?
=======================================================================
Aaron Konstam telephone: (210) 656-0355 e-mail: akonstam sbcglobal net


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]