[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Problem with the eth0 boot



Hi all,

When I turn on the computer, the eth0 interface doesn't run, so I need to activate it using "service network start".

These are setting of eth0

[CODE]# Realtek Semiconductor Co., Ltd. RTL8101E PCI Express Fast Ethernet controller
DEVICE=eth0
BOOTPROTO=none
HWADDR=00:19:66:40:cc:7a
ONBOOT=yes
DHCP_HOSTNAME=mishima
NM_CONTROLLED=no
TYPE=Ethernet
USERCTL=no
PEERDNS=yes
IPV6INIT=no
IPADDR=192.168.0.2
NETMASK=255.255.255.0
GATEWAY=192.168.0.1
DNS1=208.67.222.222
DNS2=208.67.220.220[/CODE]

How can I do? Thanks in advance

 :-D  :-D


-- 
This is an email sent via The Fedora Community Portal https://fcp.surfsite.org
https://fcp.surfsite.org/modules/newbb/viewtopic.php?post_id=294846&topic_id=62521&forum=10#forumpost294846
If you think, this is spam, please report this to webmaster fcp surfsite org and/or blame marco dr89 gmail com 


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]