[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: TVtime and KWORLD PlusTV Analog lite PCI

On Sunday 12 October 2008 19:42, yordy wrote:
> I would see now. But, searching more over Internet I found this page for
> Ububu:
> http://equiman.blogspot.com/2008/09/configurar-tarjeta-de-tv-kworld-olus-tv
>.html, everything work for me (Fedora 8) but, I can't get  any sound  with 
> sox. When I run  tvtime.sh
> ALSA lib pcm_hw.c:1240:(_snd_pcm_hw_open) Invalid value for card
> sox stio: Failed reading `hw:1,0': cannot open audio device
> Sound  work when I run modprobe saa7134-alsa manually, how can I set
> saa7134-alsa to be loaded at boot time? After run modprobe saa7134-alsa
> manually I run dmesg | grep alsa and:
> saa7134 ALSA driver for DMA sound loaded
> saa7134[0]/alsa: saa7134[0] at 0xa3004800 irq 22 registered as card -1
> If I set -t alsa hw:-1,0 -t alsa hw:0,0 & in sox -r 32000 -w -t alsa hw:1,0
> -t alsa hw:0,0 &, then -1 isn't  a correct card value.
> Resuming
> I set /etc/modprobe.d/saa7134 with options saa7134 card=59 tuner=56 and
> running /usr/bin/tvtime work fine, I can watch the TV. And running manually
> modprobe saa7134-alsa from console I get the sound to work.
> Anyway, with saa7134-alsa I get sound, how I can get saa7134-alsa loaded at
> boot time?

Su to root and open a text editor (gedit, kwrite, whatever), and navigate 
to /etc/rc.d/rc.local, and add the following line to the file.

modprobe saa7134-alsa

It should now be loaded when you boot.

There should be some easier way to do this. Can you post the contents 
of /etc/modprobe.conf.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]