[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Fedora 9 Boot Problem



Here's the results of 'lspci -v'

00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
	Subsystem: ASUSTeK Computer Inc. Unknown device 82f1
	Flags: bus master, 66MHz, medium devsel, latency 0
	Capabilities: [c4] HyperTransport: Slave or Primary Interface
	Capabilities: [54] HyperTransport: UnitID Clumping
	Capabilities: [40] HyperTransport: Retry Mode
	Capabilities: [9c] HyperTransport: #1a
	Capabilities: [f8] HyperTransport: #1c

00:01.0 PCI bridge: ASUSTeK Computer Inc. Unknown device 9602 (prog-if 00 [Normal decode])
	Flags: bus master, 66MHz, medium devsel, latency 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fbd00000-fbefffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
	Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Unknown device 82f1
	Kernel modules: shpchp

00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fbf00000-fbffffff
	Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
	Capabilities: [50] Power Management version 3
	Capabilities: [58] Express Root Port (Slot+), MSI 00
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
	Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Unknown device 82f1
	Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
	Kernel driver in use: pcieport-driver
	Kernel modules: shpchp

00:11.0 RAID bus controller: ATI Technologies Inc SB700/SB800 SATA Controller [Non-RAID5 mode]
	Subsystem: ASUSTeK Computer Inc. Unknown device 82ef
	Flags: bus master, 66MHz, medium devsel, latency 96, IRQ 22
	I/O ports at c000 [size=8]
	I/O ports at b000 [size=4]
	I/O ports at a000 [size=8]
	I/O ports at 9000 [size=4]
	I/O ports at 8000 [size=16]
	Memory at fbcff800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [60] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
	Capabilities: [70] SATA HBA <?>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 82ef
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
	Memory at fbcfe000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:12.1 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI1 Controller (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 82ef
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
	Memory at fbcfd000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 82ef
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
	Memory at fbcff000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [c0] Power Management version 2
	Capabilities: [e4] Debug port: BAR=1 offset=00e0
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 82ef
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
	Memory at fbcfc000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.1 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI1 Controller (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 82ef
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
	Memory at fbcf7000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 82ef
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 19
	Memory at fbcf6800 (32-bit, non-prefetchable) [size=256]
	Capabilities: [c0] Power Management version 2
	Capabilities: [e4] Debug port: BAR=1 offset=00e0
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd

00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
	Subsystem: ASUSTeK Computer Inc. Unknown device 82ef
	Flags: 66MHz, medium devsel
	Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
	Kernel modules: i2c-piix4

00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. Unknown device 82ef
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
	I/O ports at 01f0 [size=8]
	I/O ports at 03f4 [size=1]
	I/O ports at 0170 [size=8]
	I/O ports at 0374 [size=1]
	I/O ports at ff00 [size=16]
Capabilities: [70] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
	Kernel driver in use: pata_atiixp
	Kernel modules: ata_generic, pata_atiixp, pata_acpi

00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
	Subsystem: ASUSTeK Computer Inc. Unknown device 82ef
	Flags: bus master, 66MHz, medium devsel, latency 0

00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (prog-if 01 [Subtractive decode])
	Flags: bus master, 66MHz, medium devsel, latency 64
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=64

00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 82ef
	Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
	Memory at fbcf5000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci_hcd
	Kernel modules: ohci-hcd

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
	Flags: fast devsel
	Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
	Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
	Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	Flags: fast devsel
	Capabilities: [f0] Secure device <?>
	Kernel modules: k8temp

01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3200 Graphics (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Unknown device 82f1
	Flags: bus master, fast devsel, latency 0, IRQ 10
	Memory at d0000000 (32-bit, prefetchable) [size=256M]
	I/O ports at d000 [size=256]
	Memory at fbef0000 (32-bit, non-prefetchable) [size=64K]
	Memory at fbd00000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: [50] Power Management version 3
Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
	Subsystem: ASUSTeK Computer Inc. Unknown device 82c6
	Flags: bus master, fast devsel, latency 0, IRQ 18
	I/O ports at e800 [size=256]
	Memory at fbfff000 (64-bit, non-prefetchable) [size=4K]
	Memory at faff0000 (64-bit, prefetchable) [size=64K]
	Expansion ROM at fbfc0000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 3
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
	Capabilities: [70] Express Endpoint, MSI 01
	Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
	Capabilities: [d0] Vital Product Data <?>
	Kernel driver in use: r8169
	Kernel modules: r8169



Craig White wrote:
On Thu, 2008-10-23 at 11:39 -0700, Jack Lauman wrote:
I've got an ASUS M3N78-EMH HDMI motherboard with 2 Gb RAM & AMD 5600 X2 proc.

There are (2) Seagate ST350032NS (500 GB SATA drives) configure in the BIOS for a RAID1. The OS is RedHat Fedora 9.

Following successful installation, it fails to boot. The grub boot loader displays correctly but immediately goes into POST and reboots as soon as the OS begins to load. There are no errors displayed.

If I use the recovery CD, I can mount the sysimage and run yum update and install software successfully. I cannot get this machine to boot on it's own without following this procedure.

Any assistance in resolving this would be greatly appreciated.
----
BIOS Raid1 ?  on ASUS motherboard? sounds like fake raid and wouldn't be
supported...at least not without some tacky vendor supplied driver.
Perhaps you need to give us info on this BIOS RAID (lspci -v)

I suspect that you would find 'software' RAID much easier to install and
get working and probably perform better too.

Craig



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]