[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: What is filesystem panic?



Mikkel L. Ellertson wrote:
Per Anton Rønning wrote:
Mikkel L. Ellertson wrote:
Double check that you are accessing the correct device. USB drives
do not always get "assigned" the same device. (It might get assigned
/dev/sdd instead of /dev/sdc for example.) If you are interested in
the reasons for this, it should probably be a separate thread...

Mikkel
Oh yes, my processor is slow now. a df command shows this:
[root localhost trade]# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
                    718841144   8123212 674202912   2% /
/dev/sda1               194442     44177    140226  24% /boot
tmpfs                  1943548        48   1943500   1% /dev/shm
/dev/ram0                15863       728     15135   5% /mnt/rd
/dev/sdf1              3985612     53992   3931620   2% /media/disk

The JetFlash pen is assigned to sdf1. But do I have to assign it to sdc1
for it to work??
What consequences does this have?

Brgds PAR

Nope - but you have to use /dev/sdf instead of /dev/sdc if you want
fdisk to tell you anything about the drive. This is why you were
getting the unable to open /dev/sdc error message from fdisk.

Mikkel
Of course!
And this is what now comes out of the woodwork:
fdisk /dev/sdf1 -l
Disk /dev/sdf1: 4089 MB, 4089428992 bytes
126 heads, 62 sectors/track, 1022 cylinders
Units = cylinders of 7812 * 512 = 3999744 bytes
Disk identifier: 0x69737369

This doesn't look like a partition table
Probably you selected the wrong device.

    Device Boot      Start         End      Blocks   Id  System
/dev/sdf1p1   ?      239347      260940    84344761   69  Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
    phys=(68, 13, 10) logical=(239346, 6, 42)
Partition 1 has different physical/logical endings:
    phys=(288, 115, 43) logical=(260939, 87, 25)
Partition 1 does not end on cylinder boundary.
/dev/sdf1p2   ?      217809      457169   934940732+  73  Unknown
Partition 2 has different physical/logical beginnings (non-Linux?):
    phys=(371, 114, 37) logical=(217808, 54, 38)
Partition 2 has different physical/logical endings:
    phys=(366, 32, 33) logical=(457168, 73, 4)
Partition 2 does not end on cylinder boundary.
/dev/sdf1p3   ?           1           1           0   74  Unknown
Partition 3 has different physical/logical beginnings (non-Linux?):
    phys=(371, 114, 37) logical=(0, 41, 32)
Partition 3 has different physical/logical endings:
    phys=(372, 97, 50) logical=(0, 41, 31)
Partition 3 does not end on cylinder boundary.
/dev/sdf1p4          369391      369398       26207+   0  Empty
Partition 4 has different physical/logical beginnings (non-Linux?):
    phys=(0, 0, 0) logical=(369390, 104, 25)
Partition 4 has different physical/logical endings:
    phys=(0, 0, 0) logical=(369397, 67, 49)
Partition 4 does not end on cylinder boundary.

Partition table entries are not in disk order
-----------------
This seems to be a mess. Is it mendable?

Brgds
PAR



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]