[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Display actual speed of ethernet connection

Stewart Williams wrote:
>>> Dave Feustel wrote:
>>>> I just got a gigabyte switch for my home network and I still
>>>> haven't figured out how to display the tx/rx data rate of each
>>>> nic connected to the switch. Also, the leds for the F9 computer
>>>> is not lighted on the switch, although F9 is accessing the
>>>> internet. 
>>>> What command will display the rx/tx data rates of each nic?
>>>> Thanks.
> Make sure you are using a cat 5e or 6 cable for gigabit. If the cable is
> old this could be why it only connects at 100Mb/s.
You could have trimmed the message down to this, and done a better
job of communicating your advice. It makes things much easier to
read without the 2 pages of file listings.


A:  Because it messes up the order in which people normally read text.
Q:  Why is top-posting a bad thing?

Attachment: signature.asc
Description: OpenPGP digital signature

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]