[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: VMware Workstation with raw disk in F12



On Thu, 2009-12-17 at 14:06 -0500, Matthew Saltzman wrote: 
> On Thu, 2009-12-17 at 10:14 -0800, Rick Stevens wrote: 
> > On 12/17/2009 09:19 AM, Michal wrote:
> > > On 17/12/2009 16:49, Matthew Saltzman wrote:
> > >> I'm trying to work with a dual-boot machine, with VMware Workstation 7,
> > >> Fedora 12 as the host, and WinXP as the guest.

So let me ask the question differently.

Does anyone have VMware Workstation 7 or equivalent working with an F12
host and a WinXP guest on a raw disk?  If so, what did you have to do?

Thanks.

[nothing new below here]

> > >>
> > >> When I define the VM and select the raw disk, VMware configures the disk
> > >> as SCSI, even though the hardware is SATA.  I changed the .vmdk file to
> > >> make the disk IDE and set the geometry appropriately, but it still
> > >> doesn't work.  ISTR that there are also some changes needed to the .vmx
> > >> file, but I can't seem to find any reference to it when I google.  I
> > >> have an old configuration (that was working before I made some changes
> > >> to the disk partitions) that I've tried to extract changes from, but the
> > >> new version is different enough that I can't tell exactly what I need.
> > >>
> > >> Any hints or sources?
> > >>
> > >> Thanks.
> > >>
> > >
> > > I am confused what the problem is. Yes VMware configures it as SCSI even
> > > though it's SATA...it will still work and run with no problems...
> > 
> > On Linux, ALL block devices are treated as if they're SCSI.  There is
> > no differentiation between IDE, SATA, SAS, fiberchannel, iSCSI, USB,
> > Firewire or true SCSI.  Even IDE-based CDROMs show up as /dev/srX.
> > This has been true for a very long time...at least a couple of years
> > and an early 2.6 kernel (2.6.4 rings a bell for some reason).
> > 
> > Since VMWare is being hosted by F12, it makes absolute sense why your
> > SATA drive appears to be SCSI.  I'm just rather surprised you just found
> > this out.
> 
> Well, I did know that, actually.  The problem is that when configured
> this way using raw disks, the VM *won't boot*.  The configuration that I
> had working in F11 before the disk rebuild had the controller type
> changed to IDE because otherwise it doesn't work.
> 
> BTW, the CD-ROM shows up in VMware as being IDE.
> 
> I have a grub floppy image that I use as a boot loader for the VM.  The
> boot loader starts and chains to the WinXP loader, then the VM hangs.  I
> should point out that the WinXP system disk was not changed when I
> repartitioned.  The grub on the bare metal machine dual boots just fine.
> If I replace the controller type in the .vmdk file, I get a message that
> the controller type is changed.  The boot starts, but it bluescreens.
> 


-- 
                Matthew Saltzman

Clemson University Math Sciences
mjs AT clemson DOT edu
http://www.math.clemson.edu/~mjs


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]