[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: SB driver in F12 ?



A lspci -v gives me the following informations :

02:00.0 Audio device: Creative Labs SB X-Fi
    Subsystem: Creative Labs Device 6002
    Flags: bus master, medium devsel, latency 64, IRQ 21
    Memory at dfff8000 (32-bit, non-prefetchable) [size=16K]
    Memory at dfc00000 (64-bit, non-prefetchable) [size=2M]
    Memory at d8000000 (64-bit, non-prefetchable) [size=64M]
    I/O ports at df00 [size=32]
    Capabilities: [40] Power Management version 2
    Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
    Kernel driver in use: SB-XFi
    Kernel modules: snd-ctxfi


I don't know the real type of my card, since I didn't open the cover :-(

Le 18/12/09 17:46, Frode Petersen a écrit :
Stewart Williams wrote:
Frode Petersen wrote:
According to the ALSA soundcard matrix [1] they support PCI versions
(not PC-cards?) from ALSA v.1.0.21 onwards. Does this match your setup?

I recently read somwhere (can't recall where) that the drivers were not
very good at the time when Creative open sourced their own (a month or
two ago maybe? I'm not sure.) If true, how much could they improve in
that time? I know this sounds a bit woolly...

[1] http://www.alsa-project.org/main/index.php/Matrix:Vendor-Creative_Labs

Frode Petersen


Hi Frode,

It's a PCI-e (PCI Express) card, and it's not listed on that web page.


I don't have that card myself, but I found this thread in the ALSA maillist archives, maybe reading through it gets you furter:

http://thread.gmane.org/gmane.linux.alsa.devel/67447

Frode



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]