[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Installing a Texas Instruments CDC Abstract Modem (USB) (Motorola W388 mobile phone) on fedora 10



Hi,
When I plug in my phone Motorola W388 . Can i configure fedora 10 to
use the modem.
The modem works in windows but it requires a device driver
PhSerUsb.sys to set it as a serial device and responds to serial
queries on COM 03 and it needs another set of drivers to register it
as a modem on windows. Drivers are provided by motorola.

What makes me hopeful is the bInterfaceClass = Communication
and bInterfaceSubClass = Modem (Abstract)
on the lsusb -v output.

Will I be able to use it on Linux ?
Kindly guide me on how to do that if possible ?

lsusb -v gives the output

Bus 003 Device 002: ID 22b8:4181 Motorola PCS
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x22b8 Motorola PCS
  idProduct          0x4181
  bcdDevice            0.01
  iManufacturer           1 Motorola
  iProduct                2 W388
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          9 TI Modem
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass         2 Communications
      bInterfaceSubClass      2 Abstract (modem)
      bInterfaceProtocol      0 None
      iInterface              5 TI Modem Interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0010  1x 16 bytes
        bInterval               1
Device Status:     0x0000
  (Bus Powered)

lsmod gives the output:

Module                  Size  Used by
cdc_acm                17668  0
fuse                   49436  2
i915                   53380  1
.................

however /dev and subdirectories does not have any ttyACMXX .


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]