[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Proper configuration for a bonded bridging a vlan?



Hi,

My current network setup is as follow:

eth0--
         |--bond0--br0
eth1--

From there, KVM/libvirtd set up guest-bridged networks as needed.

I would like to add to this configuration a tagged vlan that will be used by certain VMs. I am not sure whether to put the vlan on bond0 or br0. Depending on how that is done, will I have to add another bridge interface?

I tried the simplistic approach by putting the vlan on both bond0 and br0, and trying to see if the host OS could at least communicate on vlan5 and worry about the KVM guests later. However, even this case does not work. I've attached my ifcfg-<interface>0.5 file in hopes that somebody can help me fix this.

VLAN=yes
DEVICE=bond0.5
BOOTPROTO=static
ONBOOT=yes

NETWORK=10.0.5.0
IPADDR=10.0.5.11
GATEWAY=10.0.5.1
NETMASK=255.255.255.0
DNS1=10.0.5.1


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]