RocketRAID 1740 and Fedora 10

[Kanwar Ranbir Sandhu]

Hi All,

I have a fully updated Fedora 10 box in which I've installed a
RocketRAID 1740 controller.  I've attached three SATA II drives to it,
and configured them for RAID 5.

When I boot the machine, the card appears to be detected properly.  But,
the actual RAID array isn't.  That is, instead of seeing one drive, all
three drives are detected individually.  Oh, the sata_mv module is being
automatically loaded.

I had this very same controller and the same drives installed in a
Fedora 7 box before.  The difference there was that I was using
Highpoint's own driver.  The RAID array came up as one drive, the way I
expected it to.

Does anyone know what could be wrong?

Regards,

Ranbir

-- 
Kanwar Ranbir Sandhu
Linux 2.6.27.24-170.2.68.fc10.x86_64 x86_64 GNU/Linux 
16:16:43 up 43 min, 4 users, load average: 0.22, 0.28, 0.19