[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: RocketRAID 1740 and Fedora 10



On Sat, 2009-06-20 at 16:28 -0400, Kanwar Ranbir Sandhu wrote:
> When I boot the machine, the card appears to be detected properly.  But,
> the actual RAID array isn't.  That is, instead of seeing one drive, all
> three drives are detected individually.  Oh, the sata_mv module is being
> automatically loaded.

> Does anyone know what could be wrong?


I should have included the output when the sata_mv module is loaded:


Jun 20 15:58:37 ranbir kernel: sata_mv 0000:05:00.0: version 1.24
Jun 20 15:58:37 ranbir kernel: sata_mv 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jun 20 15:58:37 ranbir kernel: sata_mv 0000:05:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
Jun 20 15:58:37 ranbir kernel: scsi14 : sata_mv
Jun 20 15:58:37 ranbir kernel: scsi15 : sata_mv
Jun 20 15:58:37 ranbir kernel: scsi16 : sata_mv
Jun 20 15:58:37 ranbir kernel: scsi17 : sata_mv
Jun 20 15:58:37 ranbir kernel: ata13: SATA max UDMA/133 mmio m1048576 0xfeb00000 port 0xfeb22000 irq 16
Jun 20 15:58:37 ranbir kernel: ata14: SATA max UDMA/133 mmio m1048576 0xfeb00000 port 0xfeb24000 irq 16
Jun 20 15:58:37 ranbir kernel: ata15: SATA max UDMA/133 mmio m1048576 0xfeb00000 port 0xfeb26000 irq 16
Jun 20 15:58:37 ranbir kernel: ata16: SATA max UDMA/133 mmio m1048576 0xfeb00000 port 0xfeb28000 irq 16
Jun 20 15:58:37 ranbir kernel: ata13: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jun 20 15:58:38 ranbir kernel: ata13.00: ATA-7: ST3500630AS, 3.AAC, max UDMA/133
Jun 20 15:58:38 ranbir kernel: ata13.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jun 20 15:58:38 ranbir kernel: ata13.00: configured for UDMA/133
Jun 20 15:58:38 ranbir kernel: ata14: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jun 20 15:58:38 ranbir kernel: ata14.00: ATA-7: ST3500630AS, 3.AAC, max UDMA/133
Jun 20 15:58:38 ranbir kernel: ata14.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jun 20 15:58:38 ranbir kernel: ata14.00: configured for UDMA/133
Jun 20 15:58:39 ranbir kernel: ata15: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jun 20 15:58:39 ranbir kernel: ata15.00: ATA-8: ST3500320AS, SD15, max UDMA/133
Jun 20 15:58:39 ranbir kernel: ata15.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
Jun 20 15:58:39 ranbir kernel: ata15.00: configured for UDMA/133
Jun 20 15:58:39 ranbir kernel: ata16: SATA link down (SStatus 0 SControl 300)
Jun 20 15:58:39 ranbir kernel: scsi 14:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
Jun 20 15:58:39 ranbir kernel: sd 14:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
Jun 20 15:58:39 ranbir kernel: sd 14:0:0:0: [sdc] Write Protect is off
Jun 20 15:58:39 ranbir kernel: sd 14:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 20 15:58:39 ranbir kernel: sd 14:0:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
Jun 20 15:58:39 ranbir kernel: sd 14:0:0:0: [sdc] Write Protect is off
Jun 20 15:58:39 ranbir kernel: sd 14:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 20 15:58:39 ranbir kernel: sdc: unknown partition table
Jun 20 15:58:39 ranbir kernel: sd 14:0:0:0: [sdc] Attached SCSI disk
Jun 20 15:58:39 ranbir kernel: sd 14:0:0:0: Attached scsi generic sg2 type 0
Jun 20 15:58:39 ranbir kernel: scsi 15:0:0:0: Direct-Access     ATA      ST3500630AS      3.AA PQ: 0 ANSI: 5
Jun 20 15:58:39 ranbir kernel: sd 15:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
Jun 20 15:58:39 ranbir kernel: sd 15:0:0:0: [sdd] Write Protect is off
Jun 20 15:58:39 ranbir kernel: sd 15:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 20 15:58:39 ranbir kernel: sd 15:0:0:0: [sdd] 976773168 512-byte hardware sectors (500108 MB)
Jun 20 15:58:39 ranbir kernel: sd 15:0:0:0: [sdd] Write Protect is off
Jun 20 15:58:39 ranbir kernel: sd 15:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 20 15:58:39 ranbir kernel: sdd: unknown partition table
Jun 20 15:58:39 ranbir kernel: sd 15:0:0:0: [sdd] Attached SCSI disk
Jun 20 15:58:39 ranbir kernel: sd 15:0:0:0: Attached scsi generic sg3 type 0
Jun 20 15:58:39 ranbir kernel: scsi 16:0:0:0: Direct-Access     ATA      ST3500320AS      SD15 PQ: 0 ANSI: 5
Jun 20 15:58:39 ranbir kernel: sd 16:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
Jun 20 15:58:39 ranbir kernel: sd 16:0:0:0: [sde] Write Protect is off
Jun 20 15:58:39 ranbir kernel: sd 16:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 20 15:58:39 ranbir kernel: sd 16:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB)
Jun 20 15:58:39 ranbir kernel: sd 16:0:0:0: [sde] Write Protect is off
Jun 20 15:58:39 ranbir kernel: sd 16:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Jun 20 15:58:39 ranbir kernel: sde: unknown partition table
Jun 20 15:58:39 ranbir kernel: sd 16:0:0:0: [sde] Attached SCSI disk
Jun 20 15:58:39 ranbir kernel: sd 16:0:0:0: Attached scsi generic sg4 type 0



-- 
Kanwar Ranbir Sandhu
Linux 2.6.27.24-170.2.68.fc10.x86_64 x86_64 GNU/Linux 
16:32:11 up 58 min, 4 users, load average: 0.00, 0.02, 0.06 



[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]