[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Change Machine, No Sound (longish)

stan wrote:

Thanks for replying again!

On Mon, 22 Jun 2009 13:27:21 -0500
Mike McCarty <Mike McCarty sbcglobal net> wrote:

stan wrote:
On Fri, 19 Jun 2009 16:22:59 -0500

When I looked at my file, I realized I've been giving you bad
information.  The file in /etc is modprobe.conf, not modules.conf.
Here is how you set it
Hmm, mine looks a little odd...

$ cat /etc/modprobe.conf


I'll say.  I think you could reduce it to:

alias snd-card-0 snd-via82xx
card options snd-via82xx index=0
alias eth0 via-rhine
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd

I'll copy it off and give that a try. I'm not familiar with the
format of that file. I think I'll give $ man or $ info a try.

But I'm not sure of the purpose of all that intel8x0 and via82xx sound
module messing about.  Your card still seems to be recognized properly
below though.

I'm not either. It could be a "leftover" from the previous hardware.


It looks like it found the "card".

Yes it does.


By every indication, you should have sound.  If you have pulseaudio
installed and enabled, it could be causing the issue.  It might be as
simple as turning up the volume in pulseaudio.  I am not knowledgeable
about pulse, so for more information you can go to


$ rpm -qi --provides pulseaudio
package pulseaudio is not installed

As I said, the software configuration I had was working, and I haven't
messed with it except to allow kudzu to remove the config for the
old stuff, and install the new.

Oppose globalization and One World Governments like the UN.
This message made from 100% recycled bits.
You have found the bank of Larn.
I speak only for myself, and I am unanimous in that!

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]