[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Setting up a home wireless server.



How would you go about setting up the routing, and would that get in the
 way of, for instance, if I want to ssh into my router from the internal
network and opposed to going right through onto the internet.

Seems there's three ways to do this from what I can find,
i.) Set up a bridging device
ii.) Use Iptables (but which, via SNAT or MASQUERADE)
iii.) Use routing tables?

What are the pro's and con's of these approaches.
Cheers,
Jim

Mark Haney wrote:
> James Allsopp wrote:
>> hi,
>> I'm setting up a wireless access point and I've got the laptop to
>> connect to the server, and dhcp working, but I can't get the firewall to
>> forward packets to the outside wall. I've seen some people setting up a
>> bridging device, but before I've done it using iptables. Is one of these
>> methods better, deprecated or just different?
>>
>> I'm using the iptables script described here;
>> http://iptables-tutorial.frozentux.net/iptables-tutorial.html#INCLUDERCFIREWALL
>>
>> the forward part is here
>> $IPTABLES -A FORWARD -i $LAN_IFACE -j ACCEPT
>> $IPTABLES -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
>> $IPTABLES -t nat -A POSTROUTING -o $INET_IFACE -j SNAT --to-source $INET_IP
>>
>> But there doesn't seem to be anything to redirect the return packets or
>> to tell it which interface the outbound packets should be on.
>>
>> It says in the tutorial masquerade should be avoided due to the extra
>> CPU, any comments?
>>
>> Thanks,
>> Jim
>>
> 
> Honestly, I've never used IPtables for that, I've always made my server
> just act like a router and input static routes between wireless and
> wired networks.  But then maybe my case is special, I route all my
> wireless packets through my server (and squid) so that I can filter what
> my kids get to on the internet.
> 
> 


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]