[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

scsi disk sdb found after fstab tries to mount it



I added a scsi disk to a machine (fedora is 10 installed to sata disk)
but mounting fails.

I boot the machine, I get a mount failure, it tells me to enter root
password or ctrl-d to reboot then (just to taunt me) I get sdb info.

Probably an easy fix, for those who know the subtle details of the
boot sequence.

Short excerpt from dmesg showing, scsi finding disk4, then mounting
root file system, then creating sd 4:0:0:0: [sdb]
----------
scsi4 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0
       <Adaptec AIC7901 Ultra320 SCSI adapter>
       aic7901: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs
EDAC e752x: tolm = 80000, remapbase = ffc000, remaplimit = 0
EDAC MC0: Giving out device to 'e752x_edac' 'E7525': DEV 0000:00:00.0
EDAC PCI0: Giving out device to module 'e752x_edac' controller 'EDAC
PCI controller': DEV '0000:00:00.0' (POLLED)
e1000 0000:03:0e.0: PCI INT A -> GSI 48 (level, low) -> IRQ 48
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
scsi 4:0:0:0: Direct-Access     SEAGATE  ST373454LW       D403 PQ: 0 ANSI: 3
scsi target4:0:0: asynchronous
scsi4:A:0:0: Tagged Queuing enabled.  Depth 4
scsi target4:0:0: Beginning Domain Validation
scsi target4:0:0: wide asynchronous
scsi target4:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RDSTRM RTI
WRFLOW PCOMP (6.25 ns, offset 63)
e1000: 0000:03:0e.0: e1000_probe: (PCI-X:100MHz:64-bit) 00:13:72:88:ae:dc
scsi target4:0:0: Ending Domain Validation
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on dm-1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 4128760k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1
extents:1 across:4128760k
IA-32 Microcode Update Driver: v1.14a <tigran aivazian fsnet co uk>
firmware: requesting intel-ucode/0f-04-0a
firmware: requesting intel-ucode/0f-04-0a
firmware: requesting intel-ucode/0f-04-0a
firmware: requesting intel-ucode/0f-04-0a
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow
Control: RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
sd 4:0:0:0: [sdb] 143374650 512-byte hardware sectors (73408 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: ab 00 10 08
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports
DPO and FUA
sd 4:0:0:0: [sdb] 143374650 512-byte hardware sectors (73408 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: ab 00 10 08


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]