[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Problem with NM and wired /wireless network



On 05/15/2009 05:33 AM, Mike Martin wrote:
Hi
I have F10 running network manager

Both wireless and wireless work fine independently, however when
network cable is plugged in wireless says it is connected (as per
applet) but cannot access any sites .

Any idea what is going on here?

The important issue here is what does the routing table look like. With both connected, run the route(8) command with the -n parameter. Take a look at your route while on wireless only
Kernel IP routing table with Wireless only
Destination     Gateway     Genmask    Flags Metric Ref    Use Iface
192.168.0.0     0.0.0.0       255.255.255.0U  2         0        0 eth1
169.254.0.0     0.0.0.0       255.255.0.0    U  1000   0        0 eth1
0.0.0.0         192.168.0.1   0.0.0.0            UG 0       0        0 eth1
Kernel IP routing table with both wireless and wired note default route.
Destination     Gateway     Genmask    Flags Metric Ref    Use Iface
192.168.0.0     0.0.0.0       255.255.255.0  U     1      0        0 eth0
192.168.0.0     0.0.0.0       255.255.255.0  U     2      0        0 eth1
169.254.0.0     0.0.0.0       255.255.0.0     U   1000   0        0 eth1
0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0

I've seen cases where NM fails to set up the default route.

--
Jerry Feldman <gaf blu org>
Boston Linux and Unix
PGP key id: 537C5846
PGP Key fingerprint: 3D1B 8377 A3C0 A5F2 ECBB  CA3B 4607 4319 537C 5846


Attachment: signature.asc
Description: OpenPGP digital signature


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]