[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: snd-hda-intel options in modprobe



Ambrogio wrote:
Hi all,

I'm working on my laptop to better use mic, headphone and speaker
(internal and external).

The laptop is a Vaio VGN-FW11E and the sound card is
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
        Subsystem: Sony Corporation Unknown device 9035
        Flags: bus master, fast devsel, latency 0, IRQ 22
        Memory at d5200000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [130] Root Complex Link <?>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

01:00.1 Audio device: ATI Technologies Inc RV620 Audio device [Radeon HD 34xx Series]
        Subsystem: Sony Corporation Unknown device 9035
        Flags: bus master, fast devsel, latency 0, IRQ 17
        Memory at d0030000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 3
        Capabilities: [58] Express Legacy Endpoint, MSI 00
        Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [100] Vendor Specific Information <?>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

With a standard Fedora 9 installation (updated) I can use the speaker
and an external mic.
I can use also the camera but not the internal mic (that I think is
present near the camera).
Alsamixer and kmix do not show options for mic other that "Front mic".
When I insert headphone, the speaker continue to sound (and also the
headphone).

I tried to use other models for hda-intel driver using the options files
in /etc/modprobe.d
whith options snd-hda-intel model=hippo
headphone inserting mute the speaker, but mic do not work
kmix shows mic - front mic - line - CD as input source but noone works without an
external mic

with
 options snd-hda-intel model=sony-assamd
is the same but with less options as input and output.

Someone can help my to found the right model?

Alsa modules installed are
 alsa-lib-1.0.17-2.fc9.i386.rpm
 alsa-utils-1.0.17-2.fc9.i386.rpm

Have you removed PulseAudio? No, not disabled... Warning, some other things may stop working, but if what you need works it may be a lesser evil. FC10 could be made to work with PA if you wasted^H^H^H^H^H^Hspent enough time onthe config, and FC11 has taken away the sliders. I have been unable to get sound working at all on FC11, I just have put that on my personal blocker list for installing FC11 on a machine which needs sound.

--
Bill Davidsen <davidsen tmr com>
  "We have more to fear from the bungling of the incompetent than from
the machinations of the wicked."  - from Slashdot


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]