How to find out drive path - Help

[Dan Track]

Hi,

I've just added a new hp array to my server and when looking in dmesg
I can see the following:

scsi0 : ioc0: LSISAS1068E B3, FwRev=01192100h, Ports=1, MaxQ=343, IRQ=185
  Vendor: HP        Model: MSA2012sa         Rev: J300
  Type:   Enclosure                          ANSI SCSI revision: 05
ACPI: PCI Interrupt 0000:17:00.0[A] -> GSI 19 (level, low) -> IRQ 98
mptbase: ioc1: Initiating bringup
ioc1: LSISAS1068E B3: Capabilities={Initiator}
PCI: Setting latency timer of device 0000:17:00.0 to 64
scsi1 : ioc1: LSISAS1068E B3, FwRev=01192100h, Ports=1, MaxQ=343, IRQ=98
  Vendor: HP        Model: MSA2012sa         Rev: J300
  Type:   Enclosure                          ANSI SCSI revision: 05
HP CISS Driver (v 3.6.20-RH2)
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 185
cciss0: <0x3230> at PCI 0000:06:00.0 IRQ 130 using DAC
      blocks= 143305920 block_size= 512
      heads= 255, sectors= 32, cylinders= 17562

      blocks= 143305920 block_size= 512
      heads= 255, sectors= 32, cylinders= 17562

 cciss/c0d0: p1 p2
libata version 3.00 loaded.
Initializing USB Mass Storage driver...


mount
/dev/mapper/VolGroup00-LogVolRoot on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/mapper/VolGroup00-LogVolVar on /var type ext3 (rw)
/dev/mapper/VolGroup00-LogVolTmp on /tmp type ext3 (rw)
/dev/mapper/VolGroup00-LogVolUsr on /usr type ext3 (rw)
/dev/cciss/c0d0p1 on /boot type ext3 (rw)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)


My question is how can I tell where the partition on the array is
mapped to on my server?

Thanks in advance.
Dan