[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Can't burn DVDs



Konstantin Svist wrote:
I just tried burning a DVD (authored by DeVeDe) and both K3b and
GnomeBaker fail to start writing. Clean boot doesn't help, neither does
lowering the write speed to 4x.
Anyone else having this problem?

That's because the message says "device not ready" and no change in parameters will make it work until you address that. Bad media, bad cable, bad burner, I can't tell. It's likely to be hardware, but I don't normally use the frontends for the tools, so you may have made a mistake in starting the run.

kernel:
2.6.31.9-174.fc12.i686

dmesg:
cdrom: This disc doesn't have any tracks I recognize!
sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current]
sr 1:0:0:0: [sr0] Add. Sense: Logical block address out of range
end_request: I/O error, dev sr0, sector 0
Buffer I/O error on device sr0, logical block 0
...
warning: `growisofs' uses 32-bit capabilities (legacy support in use)
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: cmd a0/01:00:00:00:80/00:00:00:00:00/a0 tag 0 dma 32768 out
         cdb 2a 00 00 00 00 00 00 00  10 00 00 00 00 00 00 00
         res 40/00:02:00:18:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: link is slow to respond, please be patient (ready=0)
ata2: device not ready (errno=-16), forcing hardreset
ata2: soft resetting link
ata2.00: configured for UDMA/33
ata2: EH complete



--
Bill Davidsen <davidsen tmr com>
  "We have more to fear from the bungling of the incompetent than from
the machinations of the wicked."  - from Slashdot


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]