SSH in/out extremely slow(PAINFUL) FC2

[Sean Bruno]

Output of ethool:

Settings for eth0:
        Supported ports: [ MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
                                1000baseT/Half 1000baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: Twisted Pair
        PHYAD: 1
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: g
        Wake-on: d
        Current message level: 0x000000ff (255)
        Link detected: yes

This appears to match my ethernet switch.  BTW, this is a Broadcom using
the tg3 driver.

On Sat, 2004-04-03 at 16:06, Charles R. Anderson wrote:
> On Sat, Apr 03, 2004 at 04:01:30PM -0800, Sean Bruno wrote:
> > Interesting followup on this one.
> > 
> > Ping is returning a time of 15ms with is within tolerance of another
> > machine sitting on the same physical and logical network.
> 
> What speed/duplex is eth0 negotiated to?
> 
> /sbin/ethtool eth0
> 
> Does that match what the switch port negotiated to?
-- 
Sean Bruno
Telecommunications Engineer
Metro One Telecommunications
Desk (503)524-1632
Cell (503)358-6832