Please read: sym0:0:0:phase change message problem!
Francois Romieu
romieu at fr.zoreil.com
Tue May 10 22:13:27 UTC 2005
Patrick <patrickm at myway.com> :
[...]
> People who are running a system using the sym53c8xx controler with SCSI
> drives, can't use FC3, FC4t1 or RHEL4 (kernel 2.6.9-5.EL). Also
> CentOS4.0 has the same problem, but that's a different story ;-)
$ /sbin/lspci -v -s 02:09.0
02:09.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 26)
Subsystem: LSI Logic / Symbios Logic LSI53C876/E PCI to Dual Channel SCSI Controller
Flags: bus master, medium devsel, latency 144, IRQ 177
I/O ports at d000 [size=256]
Memory at feaffc00 (32-bit, non-prefetchable) [size=256]
Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <available only to root>
$ /sbin/lsmod | grep sym
sym53c8xx 79577 12
scsi_transport_spi 19521 1 sym53c8xx
scsi_mod 129801 4 sr_mod,sym53c8xx,scsi_transport_spi,sd_mod
Smoothly running a 2.6.11-1.14_FC3smp kernel (raid1 + p4 ht).
--
Ueimor
More information about the fedora-test-list
mailing list