Mounting USB drives under rawhide

[Paul]

Hi,

Okay, I give up. I'm running the current rawhide kernel on an x86_64 box
and I can't get anything other than the laser printer to be recognised
when I hot plug them in.

What device name do I need to use to mount them by hand?

/dev shows the following usb points

/dev/usbdev1.1_ep00
/dev/usbdev1.1_ep81
/dev/usbdev2.1_ep00
/dev/usbdev2.1_ep81
/dev/usbdev2.2_ep00
/dev/usbdev2.2_ep01
/dev/usbdev2.2_ep82
/dev/usbdev2.7_ep00
/dev/usbdev2.7_ep02
/dev/usbdev2.7_ep81
/dev/usbdev3.1_ep00
/dev/usbdev3.1_ep81

/dev/usb:
lp0

/proc/bus/usb/devices comes up with the following


T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.19-1.2891.fc7 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:02.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 4
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.19-1.2891.fc7 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:02.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=55aa ProdID=b012 Rev= 1.01
S:  Manufacturer= 
S:  Product=8-in-2  
S:  SerialNumber=D8C1CC9553
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=02 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03f0 ProdID=3004 Rev= 1.00
S:  Manufacturer=Hewlett-Packard
S:  Product=DeskJet 980C
S:  SerialNumber=ES16B190F0OF
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 4
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.19-1.2891.fc7 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:02.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms

If I try to mount (say) /dev/usbdev3.1_ep81 I get an error saying it's
not a block device.

I really need to be able to mount USB devices, so any help would be
appreciated.

kernel : 2.6.19-1.2891.fc7

TTFN

Paul
-- 
"Mmmmmmmm....Shakira geschmiert mit schokolade" sagt Homer
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://listman.redhat.com/archives/fedora-test-list/attachments/20070101/7775ebb8/attachment.sig>