..MP-BIOS bug: 8254 timer not connected to IO-APIC
Milos Jakubicek
xjakub at fi.muni.cz
Fri Jan 18 18:37:02 UTC 2008
Hi,
I know this message from a Thinkpad R51e, where it shows on every
startup, however it doesn't break anything...the startup continues and
completes with no problems. I can get rid of it (i.e. displaying the
message) by adding the "noapic" option to the kernel parameters (in
/etc/grub.conf)...try this or similar options, maybe it helps.
Regards,
Milos Jakubicek
Arne Chr. Jorgensen wrote:
> hi,
>
>
> I wish I was able to break all of this down, as I don't
> understand much of it. Hope someone here may add some
> comment.
>
>
> On a HP-Compac 6715b, I got the included errors. It would
> only recognize text mode during install ( text mode install
> has errors that hasn't been corrected since ? FC5 ? ) and
> I had to download propritary driver from ATI. Several
> applications fails ( could seem like a timer error ? )
>
> Anyway, I include the /var/log/dmesg files for 2 Fedora8
>
> What can I do ?
>
> //ARNE
>
> =============================================================================
>
> Linux version 2.6.23.1-42.fc8
> (kojibuilder at xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070925
> (Red Hat 4.1.2-33)) #1 SMP Tue Oct 30 13:18:33 EDT 2007
> Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000077fb0000 (usable)
> BIOS-e820: 0000000077fb0000 - 0000000077fc8000 (reserved)
> BIOS-e820: 0000000077fc8000 - 0000000077fe7fb8 (ACPI NVS)
> BIOS-e820: 0000000077fe7fb8 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
> BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> Entering add_active_range(0, 0, 159) 0 entries of 3200 used
> Entering add_active_range(0, 256, 491440) 1 entries of 3200 used
> end_pfn_map = 1048576
> DMI 2.4 present.
> ACPI: RSDP 000FE0B0, 0024 (r2 HP )
> ACPI: XSDT 77FC81B8, 005C (r1 HPQOEM SLIC-MPC 1 HP 1)
> ACPI: FACP 77FC8084, 00F4 (r4 HP 0944 3 HP 1)
> ACPI Error (tbfadt-0453): 32/64X address mismatch in "Pm2ControlBlock":
> [00008800] [0000000000008100], using 64X [20070126]
> ACPI: DSDT 77FC8498, 11437 (r1 HP SB400 10000 MSFT 3000001)
> ACPI: FACS 77FE7D80, 0040
> ACPI: SLIC 77FC8214, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
> ACPI: EPTH 77FC838C, 0038 (r1 HP 0944 1 HP 1)
> ACPI: APIC 77FC83C4, 0062 (r1 HP 0944 1 HP 1)
> ACPI: MCFG 77FC8428, 003C (r1 HP 0944 1 HP 1)
> ACPI: TCPA 77FC8464, 0032 (r2 HP 0944 1 HP 1)
> ACPI: SSDT 77FD98CF, 0206 (r1 HP PSSTBLID 1 HP 1)
> Scanning NUMA topology in Northbridge 24
> CPU has 2 num_cores
> No NUMA configuration found
> Faking a node at 0000000000000000-0000000077fb0000
> Entering add_active_range(0, 0, 159) 0 entries of 3200 used
> Entering add_active_range(0, 256, 491440) 1 entries of 3200 used
> Bootmem setup node 0 0000000000000000-0000000077fb0000
> No mptable found.
> Zone PFN ranges:
> DMA 0 -> 4096
> DMA32 4096 -> 1048576
> Normal 1048576 -> 1048576
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
> 0: 0 -> 159
> 0: 256 -> 491440
> On node 0 totalpages: 491343
> DMA zone: 56 pages used for memmap
> DMA zone: 1313 pages reserved
> DMA zone: 2630 pages, LIFO batch:0
> DMA32 zone: 6662 pages used for memmap
> DMA32 zone: 480682 pages, LIFO batch:31
> Normal zone: 0 pages used for memmap
> Movable zone: 0 pages used for memmap
> ATI board detected. Disabling timer routing over 8254.
> ACPI: PM-Timer IO Port: 0x8008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 (Bootup-CPU)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
> swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
> swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
> Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
> SMP: Allowing 2 CPUs, 0 hotplug CPUs
> PERCPU: Allocating 41688 bytes of per cpu data
> Built 1 zonelists in Node order. Total pages: 483312
> Policy zone: DMA32
> Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Extended CMOS year: 2000
> TSC calibrated against PM_TIMER
> Marking TSC unstable due to TSCs unsynchronized
> time.c: Detected 1994.880 MHz processor.
> Console: colour VGA+ 80x25
> console [tty0] enabled
> Checking aperture...
> CPU 0: aperture @ 0 size 32 MB
> No AGP bridge found
> Memory: 1929128k/1965760k available (2441k kernel code, 36244k reserved,
> 1378k data, 324k init)
> SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
> Calibrating delay using timer specific routine.. 3996.91 BogoMIPS
> (lpj=1998457)
> Security Framework v1.0.0 initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> selinux_register_security: Registering secondary module capability
> Capability LSM initialized as secondary
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 0/0 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> SMP alternatives: switching to UP code
> ACPI: Core revision 20070126
> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> Disabling APIC timer
> SMP alternatives: switching to SMP code
> Booting processor 1/2 APIC 0x1
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3989.43 BogoMIPS
> (lpj=1994716)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 1/1 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
> Brought up 2 CPUs
> sizeof(vma)=176 bytes
> sizeof(page)=56 bytes
> sizeof(inode)=560 bytes
> sizeof(dentry)=208 bytes
> sizeof(ext3inode)=760 bytes
> sizeof(buffer_head)=104 bytes
> sizeof(skbuff)=232 bytes
> sizeof(task_struct)=2064 bytes
> Time: 10:02:27 Date: 01/18/08
> NET: Registered protocol family 16
> No dock devices found.
> ACPI: bus type pci registered
> PCI: Using configuration type 1
> ACPI: EC: Look up EC in DSDT
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
> ACPI: PCI Root Bridge [C08B] (0000:00)
> PCI: Transparent bridge - 0000:00:14.4
> ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT]
> ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled.
> ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled.
> ACPI: Power Resource [C171] (off)
> ACPI: Power Resource [C230] (off)
> ACPI: Power Resource [C24C] (on)
> ACPI: Power Resource [C395] (off)
> ACPI: Power Resource [C396] (off)
> ACPI: Power Resource [C397] (off)
> ACPI: Power Resource [C398] (off)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 14 devices
> ACPI: ACPI bus type pnp unregistered
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> PCI: Cannot allocate resource region 0 of device 0000:00:14.2
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
> pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
> pnp: 00:00: iomem range 0x100000-0xffffffff could not be reserved
> pnp: 00:0a: ioport range 0x40b-0x40b has been reserved
> pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
> pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
> pnp: 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
> pnp: 00:0c: ioport range 0x8000-0x802f has been reserved
> pnp: 00:0c: ioport range 0x8100-0x811f has been reserved
> pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
> pnp: 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
> pnp: 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
> pnp: 00:0d: iomem range 0xcd400-0xcffff has been reserved
> pnp: 00:0d: iomem range 0xd2a00-0xd2fff has been reserved
> pnp: 00:0d: iomem range 0x0-0x7ffffff could not be reserved
> pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
> PCI: Bridge: 0000:00:01.0
> IO window: 4000-4fff
> MEM window: d0400000-d05fffff
> PREFETCH window: c0000000-c7ffffff
> PCI: Bridge: 0000:00:04.0
> IO window: disabled.
> MEM window: d0000000-d00fffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:05.0
> IO window: 2000-3fff
> MEM window: cc000000-cfffffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:06.0
> IO window: disabled.
> MEM window: c8000000-c80fffff
> PREFETCH window: disabled.
> PCI: Bus 3, cardbus bridge: 0000:02:04.0
> IO window: 00001000-000010ff
> IO window: 00001400-000014ff
> PREFETCH window: 88000000-8bffffff
> MEM window: 90000000-93ffffff
> PCI: Bridge: 0000:00:14.4
> IO window: 1000-1fff
> MEM window: d0100000-d03fffff
> PREFETCH window: 88000000-8bffffff
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> PCI: Setting latency timer of device 0000:00:05.0 to 64
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20
> NET: Registered protocol family 2
> Time: acpi_pm clocksource has been installed.
> Clockevents: could not switch to one-shot mode:<6>Clockevents: could not
> switch to one-shot mode: lapic is not functional.
> Could not switch to high resolution mode on CPU 0
> lapic is not functional.
> Could not switch to high resolution mode on CPU 1
> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> checking if image is initramfs... it is
> Freeing initrd memory: 3835k freed
> audit: initializing netlink socket (disabled)
> audit(1200650546.804:1): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> SELinux: Registering netfilter hooks
> ksign: Installing public key data
> Loading keyring
> - Added public key 2B02AABF702ECCF9
> - User ID: Red Hat, Inc. (Kernel Module GPG key)
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> PCI: MSI quirk detected. MSI deactivated.
> Boot video device is 0000:01:05.0
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:04.0:pcie00]
> PCI: Setting latency timer of device 0000:00:05.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:05.0:pcie00]
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:06.0:pcie00]
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> ACPI: Transitioning device [C399] to D3
> ACPI: Transitioning device [C399] to D3
> ACPI: Fan [C399] (off)
> ACPI: Transitioning device [C39A] to D3
> ACPI: Transitioning device [C39A] to D3
> ACPI: Fan [C39A] (off)
> ACPI: Transitioning device [C39B] to D3
> ACPI: Transitioning device [C39B] to D3
> ACPI: Fan [C39B] (off)
> ACPI: Transitioning device [C39C] to D3
> ACPI: Transitioning device [C39C] to D3
> ACPI: Fan [C39C] (off)
> ACPI: Processor [C000] (supports 8 throttling states)
> ACPI: Processor [C001] (supports 8 throttling states)
> ACPI: Thermal Zone [TZ1] (32 C)
> Real Time Clock Driver v1.12ac
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.102
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
> input: Macintosh mouse button emulation as /class/input/input0
> Yenta: CardBus bridge found at 0000:02:04.0 [103c:30c2]
> Yenta: ISA IRQ mask 0x0cb8, PCI irq 20
> Socket status: 30000006
> Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
> pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
> pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd03fffff
> pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
> Clockevents: could not switch to one-shot mode:<6>Clockevents: could not
> switch to one-shot mode: lapic is not functional.
> Could not switch to high resolution mode on CPU 1
> lapic is not functional.
> Could not switch to high resolution mode on CPU 0
> PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12
> i8042.c: Detected active multiplexing controller, rev 1.1.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX0 port at 0x60,0x64 irq 12
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> cpuidle: using governor menu
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60
> processors (2 cpu cores) (version 2.00.00)
> powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13
> powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15
> powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x17
> powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
> powernow-k8: ph2 null fid transition 0xc
> Magic number: 8:341:22
> Freeing unused kernel memory: 324k freed
> Write protecting the kernel read-only data: 1020k
> ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 23 (level, low) -> IRQ 23
> ehci_hcd 0000:00:13.5: EHCI Host Controller
> ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:13.5: debug port 1
> ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000
> ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 10 ports detected
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 23 (level, low) -> IRQ 23
> ohci_hcd 0000:00:13.0: OHCI Host Controller
> ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.1: OHCI Host Controller
> ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
> serio: Synaptics pass-through port at isa0060/serio4/input0
> ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.2: OHCI Host Controller
> ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
> ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000
> input: SynPS/2 Synaptics TouchPad as /class/input/input1
> input: AT Translated Set 2 keyboard as /class/input/input2
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.3: OHCI Host Controller
> ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
> ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.4: OHCI Host Controller
> ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
> ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000
> usb usb6: configuration #1 chosen from 1 choice
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 2 ports detected
> USB Universal Host Controller Interface driver v3.0
> SCSI subsystem initialized
> libata version 2.21 loaded.
> ahci 0000:00:12.0: version 2.3
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
> ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
> usb 4-1: new full speed USB device using ohci_hcd and address 2
> usb 4-1: configuration #1 chosen from 1 choice
> ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
> ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> scsi3 : ahci
> ata1: SATA max UDMA/133 cmd 0xffffc20000ad2100 ctl 0x0000000000000000
> bmdma 0x0000000000000000 irq 16
> ata2: SATA max UDMA/133 cmd 0xffffc20000ad2180 ctl 0x0000000000000000
> bmdma 0x0000000000000000 irq 16
> ata3: SATA max UDMA/133 cmd 0xffffc20000ad2200 ctl 0x0000000000000000
> bmdma 0x0000000000000000 irq 16
> ata4: SATA max UDMA/133 cmd 0xffffc20000ad2280 ctl 0x0000000000000000
> bmdma 0x0000000000000000 irq 16
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-7: TOSHIBA MK1637GSX, DL032C, max UDMA/100
> ata1.00: 312581808 sectors, multi 16: LBA48
> ata1.00: configured for UDMA/100
> ata2: SATA link down (SStatus 0 SControl 0)
> ata3: SATA link down (SStatus 0 SControl 0)
> ata4: SATA link down (SStatus 0 SControl 0)
> scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1637GS DL03 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
> sd 0:0:0:0: [sda] Attached SCSI disk
> device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
> dm-devel at redhat.com
> ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
> scsi4 : pata_atiixp
> scsi5 : pata_atiixp
> ata5: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6
> bmdma 0x0000000000015040 irq 14
> ata6: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376
> bmdma 0x0000000000015048 irq 15
> ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WC05, max MWDMA2
> ata5.00: configured for MWDMA2
> scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WC05 PQ: 0 ANSI: 5
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> audit(1200650557.312:2): enforcing=1 old_enforcing=0 auid=4294967295
> security: 8 users, 11 roles, 2363 types, 114 bools, 1 sens, 1024 cats
> security: 67 classes, 213052 rules
> SELinux: Completing initialization.
> SELinux: Setting up existing superblocks.
> SELinux: initialized (dev dm-0, type ext3), uses xattr
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
> genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> audit(1200650557.817:3): policy loaded auid=4294967295
> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 4:0:0:0: Attached scsi CD-ROM sr0
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> sr 4:0:0:0: Attached scsi generic sg1 type 5
> tg3.c:v3.81 (September 5, 2007)
> ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:10:00.0 to 64
> ACPI: AC Adapter [C1EB] (off-line)
> input: Power Button (FF) as /class/input/input3
> ACPI: Power Button (FF) [PWRF]
> input: Sleep Button (CM) as /class/input/input4
> ACPI: Sleep Button (CM) [C28D]
> input: Lid Switch as /class/input/input5
> ACPI: Lid Switch [C265]
> ACPI: Battery Slot [C1ED] (battery present)
> ACPI: Battery Slot [C1EC] (battery absent)
> eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express)
> 10/100/1000Base-T Ethernet 00:1a:4b:75:95:72
> eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
> eth0: dma_rwctrl[76180000] dma_mask[64-bit]
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> input: Video Bus as /class/input/input6
> ACPI: Video Device [C08D] (multi-head: yes rom: no post: no)
> pnp: Device 00:02 activated.
> parport_pc 00:02: reported by Plug and Play ACPI
> pnp: Device 00:02 disabled.
> tpm_inf_pnp 00:03: Found C231 with ID IFX0102
> tpm_inf_pnp 00:03: TPM found: config base 0x520, data base 0x530, chip
> version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635
> TT 1.2)
> SELinux: initialized (dev securityfs, type securityfs), not configured
> for labeling
> ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 21 (level, low) -> IRQ 21
> firewire_ohci: Added fw-ohci device 0000:02:04.1, OHCI version 1.10
> ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
> si3054: cannot initialize. EXT MID = 0000
> firewire_core: created new fw device fw0 (0 config rom retries, S400)
> device-mapper: multipath: version 1.0.5 loaded
> loop: module loaded
> EXT3 FS on dm-0, internal journal
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda5, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev sda5, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1
> extents:1 across:2031608k
> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
> genfs_contexts
>
> ==============================================================================
>
> Linux version 2.6.23.9-85.fc8
> (kojibuilder at xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2
> 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Dec 7 15:49:36 EST 2007
> Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000077fb0000 (usable)
> BIOS-e820: 0000000077fb0000 - 0000000077fc8000 (reserved)
> BIOS-e820: 0000000077fc8000 - 0000000077fe7fb8 (ACPI NVS)
> BIOS-e820: 0000000077fe7fb8 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
> BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> Entering add_active_range(0, 0, 159) 0 entries of 3200 used
> Entering add_active_range(0, 256, 491440) 1 entries of 3200 used
> end_pfn_map = 1048576
> DMI 2.4 present.
> ACPI: RSDP 000FE0B0, 0024 (r2 HP )
> ACPI: XSDT 77FC81B8, 005C (r1 HPQOEM SLIC-MPC 1 HP 1)
> ACPI: FACP 77FC8084, 00F4 (r4 HP 0944 3 HP 1)
> ACPI Error (tbfadt-0453): 32/64X address mismatch in "Pm2ControlBlock":
> [00008800] [0000000000008100], using 64X [20070126]
> ACPI: DSDT 77FC8498, 11437 (r1 HP SB400 10000 MSFT 3000001)
> ACPI: FACS 77FE7D80, 0040
> ACPI: SLIC 77FC8214, 0176 (r1 HPQOEM SLIC-MPC 1 HP 1)
> ACPI: EPTH 77FC838C, 0038 (r1 HP 0944 1 HP 1)
> ACPI: APIC 77FC83C4, 0062 (r1 HP 0944 1 HP 1)
> ACPI: MCFG 77FC8428, 003C (r1 HP 0944 1 HP 1)
> ACPI: TCPA 77FC8464, 0032 (r2 HP 0944 1 HP 1)
> ACPI: SSDT 77FD98CF, 0206 (r1 HP PSSTBLID 1 HP 1)
> Scanning NUMA topology in Northbridge 24
> CPU has 2 num_cores
> No NUMA configuration found
> Faking a node at 0000000000000000-0000000077fb0000
> Entering add_active_range(0, 0, 159) 0 entries of 3200 used
> Entering add_active_range(0, 256, 491440) 1 entries of 3200 used
> Bootmem setup node 0 0000000000000000-0000000077fb0000
> No mptable found.
> Zone PFN ranges:
> DMA 0 -> 4096
> DMA32 4096 -> 1048576
> Normal 1048576 -> 1048576
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
> 0: 0 -> 159
> 0: 256 -> 491440
> On node 0 totalpages: 491343
> DMA zone: 56 pages used for memmap
> DMA zone: 1315 pages reserved
> DMA zone: 2628 pages, LIFO batch:0
> DMA32 zone: 6662 pages used for memmap
> DMA32 zone: 480682 pages, LIFO batch:31
> Normal zone: 0 pages used for memmap
> Movable zone: 0 pages used for memmap
> ATI board detected. Disabling timer routing over 8254.
> ACPI: PM-Timer IO Port: 0x8008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 (Bootup-CPU)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
> swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
> swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
> Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
> SMP: Allowing 2 CPUs, 0 hotplug CPUs
> PERCPU: Allocating 41688 bytes of per cpu data
> Built 1 zonelists in Node order. Total pages: 483310
> Policy zone: DMA32
> Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Extended CMOS year: 2000
> TSC calibrated against PM_TIMER
> Marking TSC unstable due to TSCs unsynchronized
> time.c: Detected 1994.903 MHz processor.
> Console: colour VGA+ 80x25
> console [tty0] enabled
> Checking aperture...
> CPU 0: aperture @ 0 size 32 MB
> No AGP bridge found
> Memory: 1929100k/1965760k available (2442k kernel code, 36272k reserved,
> 1381k data, 324k init)
> SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
> Calibrating delay using timer specific routine.. 3997.40 BogoMIPS
> (lpj=1998702)
> Security Framework v1.0.0 initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> selinux_register_security: Registering secondary module capability
> Capability LSM initialized as secondary
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 0/0 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> SMP alternatives: switching to UP code
> ACPI: Core revision 20070126
> ..MP-BIOS bug: 8254 timer not connected to IO-APIC
> Disabling APIC timer
> SMP alternatives: switching to SMP code
> Booting processor 1/2 APIC 0x1
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3989.44 BogoMIPS
> (lpj=1994722)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 1/1 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
> Brought up 2 CPUs
> sizeof(vma)=176 bytes
> sizeof(page)=56 bytes
> sizeof(inode)=560 bytes
> sizeof(dentry)=208 bytes
> sizeof(ext3inode)=760 bytes
> sizeof(buffer_head)=104 bytes
> sizeof(skbuff)=232 bytes
> sizeof(task_struct)=2080 bytes
> Time: 10:42:41 Date: 01/18/08
> NET: Registered protocol family 16
> No dock devices found.
> ACPI: bus type pci registered
> PCI: Using configuration type 1
> ACPI: EC: Look up EC in DSDT
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
> ACPI: PCI Root Bridge [C08B] (0000:00)
> PCI: Transparent bridge - 0000:00:14.4
> ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT]
> ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled.
> ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled.
> ACPI: Power Resource [C171] (off)
> ACPI: Power Resource [C230] (off)
> ACPI: Power Resource [C24C] (on)
> ACPI: Power Resource [C395] (off)
> ACPI: Power Resource [C396] (off)
> ACPI: Power Resource [C397] (off)
> ACPI: Power Resource [C398] (off)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 14 devices
> ACPI: ACPI bus type pnp unregistered
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> PCI: Cannot allocate resource region 0 of device 0000:00:14.2
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
> pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
> pnp: 00:00: iomem range 0x100000-0xffffffff could not be reserved
> pnp: 00:0a: ioport range 0x40b-0x40b has been reserved
> pnp: 00:0a: ioport range 0x4d0-0x4d1 has been reserved
> pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
> pnp: 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
> pnp: 00:0c: ioport range 0x8000-0x802f has been reserved
> pnp: 00:0c: ioport range 0x8100-0x811f has been reserved
> pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
> pnp: 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
> pnp: 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
> pnp: 00:0d: iomem range 0xcd400-0xcffff has been reserved
> pnp: 00:0d: iomem range 0xd2a00-0xd2fff has been reserved
> pnp: 00:0d: iomem range 0x0-0x7ffffff could not be reserved
> pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
> PCI: Bridge: 0000:00:01.0
> IO window: 4000-4fff
> MEM window: d0400000-d05fffff
> PREFETCH window: c0000000-c7ffffff
> PCI: Bridge: 0000:00:04.0
> IO window: disabled.
> MEM window: d0000000-d00fffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:05.0
> IO window: 2000-3fff
> MEM window: cc000000-cfffffff
> PREFETCH window: disabled.
> PCI: Bridge: 0000:00:06.0
> IO window: disabled.
> MEM window: c8000000-c80fffff
> PREFETCH window: disabled.
> PCI: Bus 3, cardbus bridge: 0000:02:04.0
> IO window: 00001000-000010ff
> IO window: 00001400-000014ff
> PREFETCH window: 8c000000-8fffffff
> MEM window: 90000000-93ffffff
> PCI: Bridge: 0000:00:14.4
> IO window: disabled.
> MEM window: d0100000-d03fffff
> PREFETCH window: disabled.
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> PCI: Setting latency timer of device 0000:00:05.0 to 64
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 20
> NET: Registered protocol family 2
> Time: acpi_pm clocksource has been installed.
> Clockevents: could not switch to one-shot mode: lapic is not functional.
> Clockevents: could not switch to one-shot mode:<4>Could not switch to
> high resolution mode on CPU 0
> lapic is not functional.
> Could not switch to high resolution mode on CPU 1
> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> TCP established hash table entries: 262144 (order: 10, 6291456 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> checking if image is initramfs... it is
> Freeing initrd memory: 3854k freed
> audit: initializing netlink socket (disabled)
> audit(1200652960.789:1): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> SELinux: Registering netfilter hooks
> ksign: Installing public key data
> Loading keyring
> - Added public key EFFF415CECD83B98
> - User ID: Red Hat, Inc. (Kernel Module GPG key)
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> PCI: MSI quirk detected. MSI deactivated.
> Boot video device is 0000:01:05.0
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:04.0:pcie00]
> PCI: Setting latency timer of device 0000:00:05.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:05.0:pcie00]
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:06.0:pcie00]
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> ACPI: Transitioning device [C399] to D3
> ACPI: Transitioning device [C399] to D3
> ACPI: Fan [C399] (off)
> ACPI: Transitioning device [C39A] to D3
> ACPI: Transitioning device [C39A] to D3
> ACPI: Fan [C39A] (off)
> ACPI: Transitioning device [C39B] to D3
> ACPI: Transitioning device [C39B] to D3
> ACPI: Fan [C39B] (off)
> ACPI: Transitioning device [C39C] to D3
> ACPI: Transitioning device [C39C] to D3
> ACPI: Fan [C39C] (off)
> ACPI: Processor [C000] (supports 8 throttling states)
> ACPI: Processor [C001] (supports 8 throttling states)
> ACPI: Thermal Zone [TZ1] (49 C)
> Real Time Clock Driver v1.12ac
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.102
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
> input: Macintosh mouse button emulation as /class/input/input0
> Yenta: CardBus bridge found at 0000:02:04.0 [103c:30c2]
> Yenta: ISA IRQ mask 0x0cb8, PCI irq 20
> Socket status: 30000006
> Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
> pcmcia: parent PCI bridge Memory window: 0xd0100000 - 0xd03fffff
> Clockevents: could not switch to one-shot mode:<6>Clockevents: could not
> switch to one-shot mode: lapic is not functional.
> Could not switch to high resolution mode on CPU 1
> lapic is not functional.
> Could not switch to high resolution mode on CPU 0
> PNP: PS/2 Controller [PNP0303:C249,PNP0f13:C24A] at 0x60,0x64 irq 1,12
> i8042.c: Detected active multiplexing controller, rev 1.1.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX0 port at 0x60,0x64 irq 12
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> cpuidle: using governor menu
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60
> processors (2 cpu cores) (version 2.00.00)
> powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x13
> powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x15
> powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x17
> powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
> powernow-k8: ph2 null fid transition 0xc
> Magic number: 8:65:730
> Freeing unused kernel memory: 324k freed
> Write protecting the kernel read-only data: 1020k
> ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 23 (level, low) -> IRQ 23
> ehci_hcd 0000:00:13.5: EHCI Host Controller
> ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:13.5: debug port 1
> ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000
> ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 10 ports detected
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 23 (level, low) -> IRQ 23
> ohci_hcd 0000:00:13.0: OHCI Host Controller
> ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.1: OHCI Host Controller
> ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000
> serio: Synaptics pass-through port at isa0060/serio4/input0
> ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.2: OHCI Host Controller
> ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
> ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000
> input: SynPS/2 Synaptics TouchPad as /class/input/input1
> input: AT Translated Set 2 keyboard as /class/input/input2
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.3: OHCI Host Controller
> ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
> ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.4: OHCI Host Controller
> ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
> ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000
> usb usb6: configuration #1 chosen from 1 choice
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 2 ports detected
> USB Universal Host Controller Interface driver v3.0
> SCSI subsystem initialized
> libata version 2.21 loaded.
> ahci 0000:00:12.0: version 2.3
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 16
> ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
> usb 4-1: new full speed USB device using ohci_hcd and address 2
> usb 4-1: configuration #1 chosen from 1 choice
> ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
> ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> scsi3 : ahci
> ata1: SATA max UDMA/133 cmd 0xffffc20000ad2100 ctl 0x0000000000000000
> bmdma 0x0000000000000000 irq 16
> ata2: SATA max UDMA/133 cmd 0xffffc20000ad2180 ctl 0x0000000000000000
> bmdma 0x0000000000000000 irq 16
> ata3: SATA max UDMA/133 cmd 0xffffc20000ad2200 ctl 0x0000000000000000
> bmdma 0x0000000000000000 irq 16
> ata4: SATA max UDMA/133 cmd 0xffffc20000ad2280 ctl 0x0000000000000000
> bmdma 0x0000000000000000 irq 16
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-7: TOSHIBA MK1637GSX, DL032C, max UDMA/100
> ata1.00: 312581808 sectors, multi 16: LBA48
> ata1.00: configured for UDMA/100
> ata2: SATA link down (SStatus 0 SControl 0)
> ata3: SATA link down (SStatus 0 SControl 0)
> ata4: SATA link down (SStatus 0 SControl 0)
> scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1637GS DL03 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
> sd 0:0:0:0: [sda] Attached SCSI disk
> device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised:
> dm-devel at redhat.com
> ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
> scsi4 : pata_atiixp
> scsi5 : pata_atiixp
> ata5: PATA max UDMA/100 cmd 0x00000000000101f0 ctl 0x00000000000103f6
> bmdma 0x0000000000015040 irq 14
> ata6: PATA max UDMA/100 cmd 0x0000000000010170 ctl 0x0000000000010376
> bmdma 0x0000000000015048 irq 15
> ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WC05, max MWDMA2
> ata5.00: configured for MWDMA2
> scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WC05 PQ: 0 ANSI: 5
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> audit(1200652971.281:2): enforcing=1 old_enforcing=0 auid=4294967295
> security: 8 users, 11 roles, 2363 types, 114 bools, 1 sens, 1024 cats
> security: 67 classes, 213052 rules
> SELinux: Completing initialization.
> SELinux: Setting up existing superblocks.
> SELinux: initialized (dev dm-0, type ext3), uses xattr
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
> genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> audit(1200652971.784:3): policy loaded auid=4294967295
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> scsi 4:0:0:0: Attached scsi generic sg1 type 5
> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 4:0:0:0: Attached scsi CD-ROM sr0
> ACPI: Battery Slot [C1ED] (battery present)
> ACPI: Battery Slot [C1EC] (battery absent)
> tg3.c:v3.81.1 (October 18, 2007)
> ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:10:00.0 to 64
> input: Power Button (FF) as /class/input/input3
> ACPI: Power Button (FF) [PWRF]
> input: Sleep Button (CM) as /class/input/input4
> ACPI: Sleep Button (CM) [C28D]
> input: Lid Switch as /class/input/input5
> ACPI: Lid Switch [C265]
> input: Video Bus as /class/input/input6
> ACPI: Video Device [C08D] (multi-head: yes rom: no post: no)
> ACPI: AC Adapter [C1EB] (off-line)
> eth0: Tigon3 [partno(none) rev b002 PHY(5787)] (PCI Express)
> 10/100/1000Base-T Ethernet 00:1a:4b:75:95:72
> eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
> eth0: dma_rwctrl[76180000] dma_mask[64-bit]
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> input: PC Speaker as /class/input/input7
> tpm_inf_pnp 00:03: Found C231 with ID IFX0102
> tpm_inf_pnp 00:03: TPM found: config base 0x520, data base 0x530, chip
> version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635
> TT 1.2)
> SELinux: initialized (dev securityfs, type securityfs), not configured
> for labeling
> pnp: Device 00:02 activated.
> parport_pc 00:02: reported by Plug and Play ACPI
> pnp: Device 00:02 disabled.
> ACPI: PCI Interrupt 0000:02:04.1[B] -> GSI 21 (level, low) -> IRQ 21
> firewire_ohci: Added fw-ohci device 0000:02:04.1, OHCI version 1.10
> ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
> si3054: cannot initialize. EXT MID = 0000
> firewire_core: created new fw device fw0 (0 config rom retries, S400)
> device-mapper: multipath: version 1.0.5 loaded
> loop: module loaded
> EXT3 FS on dm-0, internal journal
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda5, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev sda5, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1
> extents:1 across:2031608k
> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
> genfs_contexts
>
> ------------------------------------------------------------------------
> Looking for last minute shopping deals? Find them fast with Yahoo!
> Search.
> <http://us.rd.yahoo.com/evt=51734/*http://tools.search.yahoo.com/newsearch/category.php?category=shopping>
>
>
More information about the fedora-test-list
mailing list