[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: Pulseaudio message - info request



2008/1/23, David Timms <dtimms iinet net au>:
> Antonio M wrote:
> > I find this recurrent line in message file
> >
> > Jan 23 10:13:11 Casa pulseaudio[7800]: module-volume-restore.c: Failed
> > to open file '(null)': No such file or directory
> $ ls -l /etc/pulse/
> $ cat /etc/pulse/default.pa
> $ ls -l .pulse/
> $ cat .pulse/volume-restore.table
> when and with what version did the message start ?
> when was PA associated packages updated ?
>


[antonio acer ~]$ ls -l /etc/pulse/
totale 12
-rw-r--r-- 1 root root 1180 30 nov 02:44 client.conf
-rw-r--r-- 1 root root 1812 30 nov 02:44 daemon.conf
-rw-r--r-- 1 root root 3862 30 nov 02:44 default.pa
[antonio acer ~]$ cat /etc/pulse/default.pa
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

.nofail

### Load something into the sample cache
#load-sample-lazy x11-bell /usr/share/sounds/gtk-events/activate.wav
load-sample-lazy pulse-hotplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-coldplug /usr/share/sounds/startup3.wav
#load-sample-lazy pulse-access /usr/share/sounds/generic.wav

.fail

### Load audio drivers statically (it's probably better to not load
### these drivers manually, but instead use module-hal-detect --
### see below -- for doing this automatically)
#load-module module-alsa-sink
#load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output
source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists /usr/lib/pulse-0.9/modules//module-hal-detect.so
load-module module-hal-detect
.else
### Alternatively use the static hardware detection module (for systems that
### lack HAL support)
load-module module-detect
.endif

### Load several protocols
load-module module-esound-protocol-unix
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP reciever module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2
rate=44100 description="RTP Multicast Sink"
#load-module module-rtp-send source=rtp.monitor

### Automatically restore the volume of playback streams
load-module module-volume-restore

### Automatically restore the default sink/source when changed by the
user during runtime
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### Load X11 bell module
#load-module module-x11-bell sample=x11-bell

### Publish connection data in the X11 root window
.ifexists /usr/lib/pulse-0.9/modules//module-x11-publish.so
load-module module-x11-publish
.endif

### Register ourselves in the X11 session manager
# Deactivated by default, to avoid deadlock when PA is started as esd
from gnome-session
# Instead we load this via /etc/xdg/autostart/ and "pactl load-module" now
# load-module module-x11-xsmp

### Load additional modules from GConf settings. This can be
configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might
conflict with manually
### loaded modules.
.ifexists /usr/lib/pulse-0.9/modules//module-gconf.so
load-module module-gconf
.endif

### Make some devices default
#set-default-sink output
#set-default-source input
[antonio acer ~]$ ls -l .pulse/
ls: impossibile accedere a .pulse/: No such file or directory

It can't find .pulse/!!!!!!

> Have you manually changed any of the pulseaudio config files in the
> above directories ?

No!!!!no manual change, I wish I knew what to change but pulseaudio is
a mistery to me.

I was not looking for any particular fault but I have found that
message looking in message file and I have this message on all my
systems....And all packages are fully updated to this moment 9.00 GMT
with development repository

Tnx for help



-- 
Antonio Montagnani
Skype : antoniomontag


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]