Kernel boot failure since 2.6.69-0.18.rc0.git9

Antonio M antonio.montagnani at gmail.com
Sun Feb 1 17:34:39 UTC 2009


2009/2/1 Art Haas <ahaas at airmail.net>:
> Hi.
>
> Here's one more report about kernel bootup errors, as I've had no luck
> with kernels more recent that the one listed in ${SUBJECT}. Below is the
> dmesg output for this working kernel, and things stop after the system
> identifies the CD drive. I've edited the output to indicate exactly
> where. The next kernel I tried was from an update about two days later,
> and that kernel and all subsequent kernels have frozen at the same
> point. A scan through this list suggests that the following bug report
> is close to what I am seeing:
>
> https://bugzilla.redhat.com/show_bug.cgi?id=479525
>
> Also, there is warning about a sleeping function called in an invalid
> context, but given that this kernel came out during the initial 2.6.29
> merge window I'd guess that this issue has been identified and resolved.
>
> The machine running Rawhide is an older Dell Optiplex GX400, btw.
>
> ===========================================================
> Initializing cgroup subsys cpuset
> Initializing cgroup subsys cpu
> Linux version 2.6.29-0.18.rc0.git9.fc11.i686
> (mockbuild at x86-1.fedora.phx.redhat.com) (gcc version 4.3.2 20081105 (Red
> Hat 4.3.2-7) (GCC) ) #1 SMP Wed Jan 7 15:31:31 EST 2009
> KERNEL supported cpus:
>  Intel GenuineIntel
>  AMD AuthenticAMD
>  NSC Geode by NSC
>  Cyrix CyrixInstead
>  Centaur CentaurHauls
>  Transmeta GenuineTMx86
>  Transmeta TransmetaCPU
>  UMC UMC UMC UMC
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
>  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000001ff77000 (usable)
>  BIOS-e820: 000000001ff77000 - 000000001ff96000 (ACPI data)
>  BIOS-e820: 000000001ff96000 - 0000000020000000 (reserved)
>  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
>  BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
>  BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> DMI 2.3 present.
> last_pfn = 0x1ff77 max_arch_pfn = 0x100000
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> kernel direct mapping tables up to 1ff77000 @ 7000-8b000
> Using x86 segment limits to approximate NX protection
> RAMDISK: 1fc34000 - 1ff66b08
> ACPI: RSDP 000FD6D0, 0014 (r0 DELL  )
> ACPI: RSDT 000FD6E4, 0030 (r1 DELL    WS330          5 ASL        61)
> ACPI: FACP 000FD718, 0074 (r1 DELL    WS330          5 ASL        61)
> ACPI: DSDT FFFE5022, 2474 (r1   DELL    dt_ex     1000 MSFT  100000D)
> ACPI: FACS 1FF96000, 0040
> ACPI: SSDT FFFE7496, 00A7 (r1   DELL    st_ex     1000 MSFT  100000D)
> ACPI: BOOT 000FD7E8, 0028 (r1 DELL    WS330          5 ASL        61)
> 0MB HIGHMEM available.
> 511MB LOWMEM available.
>  mapped low ram: 0 - 1ff77000
>  low ram: 00000000 - 1ff77000
>  bootmap 00002000 - 00005ff0
> (9 early reservations) ==> bootmem [0000000000 - 001ff77000]
>  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 -
> 0000001000]
>  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 -
> 0000002000]
>  #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 -
> 0000007000]
>  #3 [0000400000 - 0000fa7ea4]    TEXT DATA BSS ==> [0000400000 -
> 0000fa7ea4]
>  #4 [001fc34000 - 001ff66b08]          RAMDISK ==> [001fc34000 -
> 001ff66b08]
>  #5 [0000fa8000 - 0000fbe000]    INIT_PG_TABLE ==> [0000fa8000 -
> 0000fbe000]
>  #6 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 -
> 0000100000]
>  #7 [0000007000 - 0000072000]          PGTABLE ==> [0000007000 -
> 0000072000]
>  #8 [0000002000 - 0000006000]          BOOTMAP ==> [0000002000 -
> 0000006000]
> Zone PFN ranges:
>  DMA      0x00000000 -> 0x00001000
>  Normal   0x00001000 -> 0x0001ff77
>  HighMem  0x0001ff77 -> 0x0001ff77
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
>    0: 0x00000000 -> 0x000000a0
>    0: 0x00000100 -> 0x0001ff77
> On node 0 totalpages: 130839
> free_area_init_node: node 0, pgdat c086ea00, node_mem_map c1001000
>  DMA zone: 60 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 3940 pages, LIFO batch:0
>  Normal zone: 1858 pages used for memmap
>  Normal zone: 124981 pages, LIFO batch:31
> Using APIC driver default
> ACPI: PM-Timer IO Port: 0x808
> SMP: Allowing 1 CPUs, 0 hotplug CPUs
> Local APIC disabled by BIOS -- you can enable it with "lapic"
> PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
> PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
> Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
> NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
> PERCPU: Allocating 1359872 bytes of per cpu data
> Built 1 zonelists in Zone order, mobility grouping on.  Total pages:
> 128921
> Kernel command line: ro root=/dev/VolGroup00/LogVol00
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> CPU 0 irqstacks, hard=c0a77000 soft=c0a57000
> PID hash table entries: 2048 (order: 11, 8192 bytes)
> TSC: PIT calibration matches PMTIMER. 1 loops
> Detected 1296.012 MHz processor.
> Console: colour VGA+ 80x25
> console [tty0] enabled
> Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
> ... MAX_LOCKDEP_SUBCLASSES:  8
> ... MAX_LOCK_DEPTH:          48
> ... MAX_LOCKDEP_KEYS:        8191
> ... CLASSHASH_SIZE:          4096
> ... MAX_LOCKDEP_ENTRIES:     8192
> ... MAX_LOCKDEP_CHAINS:      16384
> ... CHAINHASH_SIZE:          8192
>  memory used by lock dependency info: 2591 kB
>  per task-struct memory footprint: 1920 bytes
> Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> allocated 2618700 bytes of page_cgroup
> please try cgroup_disable=memory option if you don't want
> Memory: 495292k/523740k available (2969k kernel code, 27824k reserved,
> 1813k data, 1676k init, 0k highmem)
> virtual kernel memory layout:
>    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
>    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
>    vmalloc : 0xe0777000 - 0xff3fe000   ( 492 MB)
>    lowmem  : 0xc0000000 - 0xdff77000   ( 511 MB)
>      .init : 0xc08b1000 - 0xc0a54000   (1676 kB)
>      .data : 0xc06e663d - 0xc08abd70   (1813 kB)
>      .text : 0xc0400000 - 0xc06e663d   (2969 kB)
> Checking if this processor honours the WP bit even in supervisor
> mode...Ok.
> SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
> Calibrating delay loop (skipped), value calculated using timer
> frequency.. 2592.02 BogoMIPS (lpj=1296012)
> Security Framework initialized
> SELinux:  Initializing.
> SELinux:  Starting in permissive mode
> Mount-cache hash table entries: 512
> Initializing cgroup subsys ns
> Initializing cgroup subsys cpuacct
> Initializing cgroup subsys memory
> Initializing cgroup subsys devices
> Initializing cgroup subsys freezer
> Initializing cgroup subsys net_cls
> CPU: Trace cache: 12K uops, L1 D cache: 8K
> CPU: L2 cache: 256K
> [ds] using netburst configuration
> CPU: Hyper-Threading is disabled
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
> CPU0: Thermal monitoring enabled
> Checking 'hlt' instruction... OK.
> SMP alternatives: switching to UP code
> debug: unmapping init memory c08ad000..c08b1000
> ACPI: Core revision 20080926
> ACPI: setting ELCR to 0200 (from 0e00)
> weird, boot CPU (#0) not listed by the BIOS.
> SMP motherboard not detected.
> Local APIC not detected. Using dummy APIC emulation.
> SMP disabled
> Brought up 1 CPUs
> Total of 1 processors activated (2592.02 BogoMIPS).
> sizeof(vma)=84 bytes
> sizeof(page)=60 bytes
> sizeof(inode)=648 bytes
> sizeof(dentry)=164 bytes
> sizeof(ext3inode)=916 bytes
> sizeof(buffer_head)=56 bytes
> sizeof(skbuff)=184 bytes
> sizeof(task_struct)=5328 bytes
> CPU0 attaching NULL sched-domain.
> khelper used greatest stack depth: 2944 bytes left
> net_namespace: 1240 bytes
> Booting paravirtualized kernel on bare hardware
> Time: 22:54:47  Date: 01/20/09
> regulator: core version 0.5
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: PCI BIOS revision 2.10 entry at 0xfc03e, last bus=2
> PCI: Using configuration type 1 for base access
> khelper used greatest stack depth: 2920 bytes left
> bio: create slab <bio-0> at 0
> ACPI: EC: Look up EC in DSDT
> ACPI: Interpreter enabled
> ACPI: (supports S0 S1 S3 S4 S5)
> ACPI: Using PIC for interrupt routing
> ACPI: No dock devices found.
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH4 GPIO
> pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
> pci 0000:00:1f.2: reg 20 io port: [0xff80-0xff9f]
> pci 0000:00:1f.3: reg 20 io port: [0xdcd0-0xdcdf]
> pci 0000:00:1f.4: reg 20 io port: [0xff60-0xff7f]
> pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd8ff]
> pci 0000:00:1f.5: reg 14 io port: [0xdc40-0xdc7f]
> pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
> pci 0000:01:00.0: reg 14 32bit mmio: [0xf0000000-0xf7ffffff]
> pci 0000:01:00.0: reg 30 32bit mmio: [0x80000000-0x8000ffff]
> pci 0000:00:01.0: bridge 32bit mmio: [0xfd000000-0xfeffffff]
> pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
> pci 0000:02:08.0: reg 10 32bit mmio: [0xff1ff800-0xff1fffff]
> pci 0000:02:08.0: reg 14 32bit mmio: [0xff1f8000-0xff1fbfff]
> pci 0000:02:08.0: supports D2
> pci 0000:02:08.0: PME# supported from D2 D3hot
> pci 0000:02:08.0: PME# disabled
> pci 0000:02:0c.0: reg 10 io port: [0xec80-0xecff]
> pci 0000:02:0c.0: reg 14 32bit mmio: [0xff1ff400-0xff1ff47f]
> pci 0000:02:0c.0: reg 30 32bit mmio: [0xff200000-0xff21ffff]
> pci 0000:02:0c.0: supports D1 D2
> pci 0000:02:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:02:0c.0: PME# disabled
> pci 0000:00:1e.0: transparent bridge
> pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
> pci 0000:00:1e.0: bridge 32bit mmio: [0xff100000-0xff2fffff]
> bus 00 -> node 0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 15)
> SCSI subsystem initialized
> libata version 3.00 loaded.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> NetLabel: Initializing
> NetLabel:  domain hash size = 128
> NetLabel:  protocols = UNLABELED CIPSOv4
> NetLabel:  unlabeled traffic allowed by default
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp 00:0b: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
> (0x800-0x87f), disabling
> pnp 00:0b: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
> (0x800-0x87f), disabling
> pnp: PnP ACPI: found 12 devices
> ACPI: ACPI bus type pnp unregistered
> system 00:00: iomem range 0x0-0x9ffff could not be reserved
> system 00:00: iomem range 0x100000-0xffffff could not be reserved
> system 00:00: iomem range 0x1000000-0x1ff76fff could not be reserved
> system 00:00: iomem range 0xf0000-0xfffff could not be reserved
> system 00:00: iomem range 0xffb00000-0xffbfffff has been reserved
> system 00:00: iomem range 0xffc00000-0xffffffff has been reserved
> system 00:0b: ioport range 0xc00-0xc7f has been reserved
> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
> pci 0000:00:01.0:   IO window: disabled
> pci 0000:00:01.0:   MEM window: 0xfd000000-0xfeffffff
> pci 0000:00:01.0:   PREFETCH window: 0x000000f0000000-0x000000f7ffffff
> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
> pci 0000:00:1e.0:   IO window: 0xe000-0xefff
> pci 0000:00:1e.0:   MEM window: 0xff100000-0xff2fffff
> pci 0000:00:1e.0:   PREFETCH window: 0x00000030000000-0x000000300fffff
> pci 0000:00:1e.0: setting latency timer to 64
> bus: 00 index 0 io port: [0x00-0xffff]
> bus: 00 index 1 mmio: [0x000000-0xffffffff]
> bus: 01 index 0 mmio: [0x0-0x0]
> bus: 01 index 1 mmio: [0xfd000000-0xfeffffff]
> bus: 01 index 2 mmio: [0xf0000000-0xf7ffffff]
> bus: 01 index 3 mmio: [0x0-0x0]
> bus: 02 index 0 io port: [0xe000-0xefff]
> bus: 02 index 1 mmio: [0xff100000-0xff2fffff]
> bus: 02 index 2 mmio: [0x30000000-0x300fffff]
> bus: 02 index 3 io port: [0x00-0xffff]
> bus: 02 index 4 mmio: [0x000000-0xffffffff]
> NET: Registered protocol family 2
> IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> TCP bind hash table entries: 16384 (order: 7, 655360 bytes)
> TCP: Hash tables configured (established 16384 bind 16384)
> TCP reno registered
> NET: Registered protocol family 1
> checking if image is initramfs... it is
> Switched to high resolution mode on CPU 0
> debug: unmapping init memory dfc34000..dff67000
> Simple Boot Flag at 0x7d set to 0x1
> apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> apm: overridden by ACPI.
> audit: initializing netlink socket (disabled)
> type=2000 audit(1232492088.076:1): initialized
> HugeTLB registered 4 MB page size, pre-allocated 0 pages
> VFS: Disk quotas dquot_6.5.2
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Created ptmx node in devpts ino 2
> msgmni has been set to 967
> SELinux:  Registering netfilter hooks
> alg: No test for stdrng (krng)
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> io scheduler noop registered
> io scheduler cfq registered (default)
> pci 0000:01:00.0: Boot video device
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> acpiphp_glue: can't get bus number, assuming 0
> input: Power Button (FF) as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> ACPI: Power Button (FF) [PWRF]
> input: Power Button (CM) as
> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
> ACPI: Power Button (CM) [VBTN]
> processor ACPI_CPU:00: registered as cooling_device0
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Non-volatile memory driver v1.3
> Linux agpgart interface v0.103
> agpgart-intel 0000:00:00.0: Intel i850 Chipset
> agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
> Serial: 8250/16550 driver4 ports, IRQ sharing enabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> brd: module loaded
> loop: module loaded
> Fixed MDIO Bus: probed
> input: Macintosh mouse button emulation as /devices/virtual/input/input2
> Driver 'sd' needs updating - please use bus_type methods
> Driver 'sr' needs updating - please use bus_type methods
> ata_piix 0000:00:1f.1: version 2.12
> ata_piix 0000:00:1f.1: setting latency timer to 64
> scsi0 : ata_piix
> scsi1 : ata_piix
> ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
> ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
> ata1.00: ATA-6: ST380013A, 8.01, max UDMA/100
> ata1.00: 156301488 sectors, multi 8: LBA48
> ata1.01: HPA detected: current 78125000, native 80043264
> ata1.01: ATA-6: Maxtor 5T040H4, TAH71DP0, max UDMA/100
> ata1.01: 78125000 sectors, multi 8: LBA
> ata1.00: configured for UDMA/100
> ata1.01: configured for UDMA/100
> ata2.01: NODEV after polling detection
> ata2.00: ATAPI: SONY    CD-RW  CRX160E, 1.0g, max UDMA/33
> ata2.00: configured for UDMA/33
> scsi 0:0:0:0: Direct-Access     ATA      ST380013A        8.01 PQ: 0
> ANSI: 5
> sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5
> GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5
> GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
>  sda: sda1 sda2
> sd 0:0:0:0: [sda] Attached SCSI disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> scsi 0:0:1:0: Direct-Access     ATA      Maxtor 5T040H4   TAH7 PQ: 0
> ANSI: 5
> sd 0:0:1:0: [sdb] 78125000 512-byte hardware sectors: (40.0 GB/37.2 GiB)
> sd 0:0:1:0: [sdb] Write Protect is off
> sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
> sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:1:0: [sdb] 78125000 512-byte hardware sectors: (40.0 GB/37.2 GiB)
> sd 0:0:1:0: [sdb] Write Protect is off
> sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
> sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
>  sdb: sdb1
> sd 0:0:1:0: [sdb] Attached SCSI disk
> sd 0:0:1:0: Attached scsi generic sg1 type 0
> scsi 1:0:0:0: CD-ROM            SONY     CD-RW  CRX160E   1.0g PQ: 0
> ANSI: 5
> ###
> ### things freeze at this point with more recent kernels
> ###
> sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> sr 1:0:0:0: Attached scsi generic sg2 type 5
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> uhci_hcd: USB Universal Host Controller Interface driver
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
> PCI: setting IRQ 11 as level-triggered
> uhci_hcd 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) ->
> IRQ 11
> uhci_hcd 0000:00:1f.2: setting latency timer to 64
> uhci_hcd 0000:00:1f.2: UHCI Host Controller
> uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000ff80
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: UHCI Host Controller
> usb usb1: Manufacturer: Linux 2.6.29-0.18.rc0.git9.fc11.i686 uhci_hcd
> usb usb1: SerialNumber: 0000:00:1f.2
> ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9
> PCI: setting IRQ 9 as level-triggered
> uhci_hcd 0000:00:1f.4: PCI INT C -> Link[LNKH] -> GSI 9 (level, low) ->
> IRQ 9
> uhci_hcd 0000:00:1f.4: setting latency timer to 64
> uhci_hcd 0000:00:1f.4: UHCI Host Controller
> uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1f.4: irq 9, io base 0x0000ff60
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: UHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.29-0.18.rc0.git9.fc11.i686 uhci_hcd
> usb usb2: SerialNumber: 0000:00:1f.4
> PNP: PS/2 Controller [PNP0303:KBD] at 0x60,0x64 irq 1
> PNP: PS/2 appears to have AUX port disabled, if this is incorrect please
> boot with i8042.nopnp
> serio: i8042 KBD port at 0x60,0x64 irq 1
> mice: PS/2 mouse device common for all mice
> rtc_cmos 00:05: RTC can wake from S4
> rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one day, 242 bytes nvram
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
> dm-devel at redhat.com
> cpuidle: using governor ladder
> cpuidle: using governor menu
> input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input3
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> usbhid: v2.6:USB HID core driver
> nf_conntrack version 0.5.0 (8183 buckets, 32732 max)
> CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
> nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option
> or
> sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
> ip_tables: (C) 2000-2006 Netfilter Core Team
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 17
> IO APIC resources could be not be allocated.
> Using IPI No-Shortcut mode
> registered taskstats version 1
>  Magic number: 9:696:957
> debug: unmapping init memory c08b1000..c0a54000
> Write protecting the kernel text: 2972k
> Write protecting the kernel read-only data: 1344k
> usb 1-2: new low speed USB device using uhci_hcd and address 2
> setfont used greatest stack depth: 2564 bytes left
> modprobe used greatest stack depth: 2512 bytes left
> usb 1-2: configuration #1 chosen from 1 choice
> input: A4Tech PS/2+USB Mouse as
> /devices/pci0000:00/0000:00:1f.2/usb1/1-2/1-2:1.0/input/input4
> a4tech 0003:09DA:0006.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech
> PS/2+USB Mouse] on usb-0000:00:1f.2-2/input0
> usb 1-2: New USB device found, idVendor=09da, idProduct=0006
> usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 1-2: Product: PS/2+USB Mouse
> usb 1-2: Manufacturer: A4Tech
> lvm used greatest stack depth: 2476 bytes left
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux:  Disabled at runtime.
> SELinux:  Unregistering netfilter hooks
> type=1404 audit(1232492091.828:2): selinux=0 auid=4294967295
> ses=4294967295
> sh used greatest stack depth: 1484 bytes left
> udev: starting version 135
> intel_rng: FWH not detected
> iTCO_vendor_support: vendor-support=0
> parport_pc 00:0a: reported by Plug and Play ACPI
> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
> iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0x0860)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> input: PC Speaker as /devices/platform/pcspkr/input/input5
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> vendor=8086 device=244e
> 3c59x 0000:02:0c.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) ->
> IRQ 11
> 3c59x: Donald Becker and others.
> 0000:02:0c.0: 3Com PCI 3c905C Tornado at e0876400.
> eth0 (3c59x): not using net_device_ops yet
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
> PCI: setting IRQ 10 as level-triggered
> i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 10 (level, low)
> -> IRQ 10
> vendor=8086 device=244e
> firewire_ohci 0000:02:08.0: PCI INT A -> Link[LNKB] -> GSI 10 (level,
> low) -> IRQ 10
> firewire_ohci: Added fw-ohci device 0000:02:08.0, OHCI version 1.0
> BUG: sleeping function called from invalid context at mm/slub.c:1599
> in_atomic(): 1, irqs_disabled(): 1, pid: 932, name: modprobe
> 1 lock held by modprobe/932:
>  #0:  (&card->lock){.+..}, at: [<e08ac90e>]
> fw_core_handle_bus_reset+0x1d/0x69f [firewire_core]
> irq event stamp: 6927
> hardirqs last  enabled at (6926): [<c06e20c4>]
> _spin_unlock_irqrestore+0x40/0x50
> hardirqs last disabled at (6927): [<c06e2322>]
> _spin_lock_irqsave+0x23/0x6d
> softirqs last  enabled at (6728): [<c043545e>] __do_softirq+0x147/0x151
> softirqs last disabled at (6921): [<c0405624>] do_softirq+0x77/0xdf
> Pid: 932, comm: modprobe Not tainted 2.6.29-0.18.rc0.git9.fc11.i686 #1
> Call Trace:
>  [<c042a646>] __might_sleep+0xea/0xef
>  [<c04a0f35>] kmem_cache_alloc+0x28/0xf4
>  [<c05b5823>] ? device_initialize+0x16/0xfe
>  [<c05b5823>] device_initialize+0x16/0xfe
>  [<e08ae12f>] fw_node_event+0x45/0x184 [firewire_core]
>  [<e08ad03a>] report_found_node+0x83/0x89 [firewire_core]
>  [<e08ac855>] for_each_fw_node+0x89/0xda [firewire_core]
>  [<e08acfb7>] ? report_found_node+0x0/0x89 [firewire_core]
>  [<e08acd75>] fw_core_handle_bus_reset+0x484/0x69f [firewire_core]
>  [<c044ec22>] ? trace_hardirqs_on_caller+0x10b/0x145
>  [<e090575d>] bus_reset_tasklet+0x377/0x382 [firewire_ohci]
>  [<c0434d03>] tasklet_action+0x80/0xeb
>  [<c04353af>] __do_softirq+0x98/0x151
>  [<c0435317>] ? __do_softirq+0x0/0x151
>  <IRQ>  [<c0470cf9>] ? handle_level_irq+0x0/0xaf
>  [<c0435072>] ? irq_exit+0x44/0x7b
>  [<c0405597>] ? do_IRQ+0xf0/0x106
>  [<c04041ac>] ? common_interrupt+0x2c/0x34
>  [<c044deb5>] ? trace_hardirqs_off+0xb/0xd
>  [<c06e20bd>] ? _spin_unlock_irqrestore+0x39/0x50
>  [<c04311c7>] ? vprintk+0x32e/0x359
>  [<c0439720>] ? msleep+0x10/0x16
>  [<e09032c4>] ? ohci_update_phy_reg+0x33/0x81 [firewire_ohci]
>  [<e08ac06e>] ? fw_core_initiate_bus_reset+0x18/0x1d [firewire_core]
>  [<e09039c8>] ? ohci_enable+0x336/0x342 [firewire_ohci]
>  [<c06dfc7f>] ? printk+0xf/0x18
>  [<e0905a47>] ? pci_probe+0x2c7/0x36c [firewire_ohci]
>  [<c0548803>] ? pci_device_probe+0x39/0x59
>  [<c05b7725>] ? driver_probe_device+0x99/0x12c
>  [<c05b77fe>] ? __driver_attach+0x46/0x62
>  [<c05b716a>] ? bus_for_each_dev+0x3d/0x67
>  [<c05b75d0>] ? driver_attach+0x14/0x16
>  [<c05b77b8>] ? __driver_attach+0x0/0x62
>  [<c05b6bf0>] ? bus_add_driver+0xa0/0x1c0
>  [<c05b797f>] ? driver_register+0x81/0xe1
>  [<c0540076>] ? __spin_lock_init+0x24/0x4a
>  [<c05489f6>] ? __pci_register_driver+0x49/0x77
>  [<e090b000>] ? fw_ohci_init+0x0/0x19 [firewire_ohci]
>  [<e090b017>] ? fw_ohci_init+0x17/0x19 [firewire_ohci]
>  [<c040114d>] ? _stext+0x65/0x17a
>  [<c0408042>] ? sched_clock+0x8/0xb
>  [<c0408042>] ? sched_clock+0x8/0xb
>  [<c044d54b>] ? lock_release_holdtime+0x30/0x131
>  [<c049f4a5>] ? check_valid_pointer+0x1f/0x4e
>  [<c044e6ed>] ? mark_lock+0x1e/0x349
>  [<c044e6ed>] ? mark_lock+0x1e/0x349
>  [<c044e6ed>] ? mark_lock+0x1e/0x349
>  [<c0457931>] ? load_module+0x15be/0x17a7
>  [<c044e6ed>] ? mark_lock+0x1e/0x349
>  [<c044ea6b>] ? mark_held_locks+0x53/0x6a
>  [<c06e1027>] ? __mutex_lock_common+0x2d4/0x329
>  [<c044ec38>] ? trace_hardirqs_on_caller+0x121/0x145
>  [<c044e6ed>] ? mark_lock+0x1e/0x349
>  [<c044ea6b>] ? mark_held_locks+0x53/0x6a
>  [<c06e0c09>] ? __mutex_unlock_slowpath+0x10d/0x121
>  [<c044ec38>] ? trace_hardirqs_on_caller+0x121/0x145
>  [<c044ec67>] ? trace_hardirqs_on+0xb/0xd
>  [<c0408042>] ? sched_clock+0x8/0xb
>  [<c044d54b>] ? lock_release_holdtime+0x30/0x131
>  [<c04457fe>] ? __blocking_notifier_call_chain+0x40/0x4c
>  [<c0444f9e>] ? up_read+0x16/0x2c
>  [<c04457fe>] ? __blocking_notifier_call_chain+0x40/0x4c
>  [<c0457c6f>] ? sys_init_module+0x89/0x18c
>  [<c0403b76>] ? syscall_call+0x7/0xb
> dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
> firewire_core: created device fw0: GUID 005042f804601310, S400
> ppdev: user-space parallel port driver
> Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 10 (level, low)
> -> IRQ 10
> Intel ICH 0000:00:1f.5: setting latency timer to 64
> intel8x0_measure_ac97_clock: measured 50795 usecs
> intel8x0: measured clock 78 rejected
> intel8x0: clocking to 48000
> modprobe used greatest stack depth: 700 bytes left
> device-mapper: multipath: version 1.0.5 loaded
> EXT3 FS on dm-0, internal journal
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS on sda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding 1048568k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1
> extents:1 across:1048568k
> platform microcode: firmware: requesting intel-ucode/0f-00-07
> Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter
> Oruba
> microcode: CPU0 updated from revision 0x7 to 0x12, date = 2002-07-16
> Microcode Update Driver: v2.00 removed.
> p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> eth0:  setting full-duplex.
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> fuse init (API version 7.11)
> Bluetooth: Core ver 2.14
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: L2CAP ver 2.11
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: SCO (Voice Link) ver 0.6
> Bluetooth: SCO socket layer initialized
> Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> Bluetooth: BNEP filters: protocol multicast
> eth0: no IPv6 routers present
> Bridge firewalling registered
>
> ====================================================
>
> Thanks.
>
> Art Haas
>
> --
> fedora-test-list mailing list
> fedora-test-list at redhat.com
> To unsubscribe:
> https://www.redhat.com/mailman/listinfo/fedora-test-list
>

I am the reporter of abovesaid bug. Please join the list on bugzilla
in order to be informed about any progress
I suppose that kernel is 29 and not 69 :-)

-- 
Antonio Montagnani
Skype : antoniomontag




More information about the fedora-test-list mailing list