No kernel 2.26.29 is working

[Antonio M]

2009/1/15 Michal Jaegermann <michal at harddata.com>:
> On Thu, Jan 15, 2009 at 03:27:14PM -0300, Horst H. von Brand wrote:
>> Antonio M <antonio.montagnani at gmail.com> wrote:
>> > No kernel 2.6.29.x is able to start any of my 3 F11 boxes.
>>
>> For me kernel-2.6.29-0.31.rc1.git2.fc11.x86_64 and 0.35 do work (kernels
>> before that did hang on boot, crash X, ...).
>>
>> It could be a broken initrd, a new mkinitrd showed up in updates
>> today.
>
> Antonio is not saying very much what really happens so no wonder
> that nobody is rushing with an advice.  OTOH from what he eventually
> posted on https://bugzilla.redhat.com/show_bug.cgi?id=479525#c4 it
> appears that this is way before initrd comes into play. What is
> supposed to come on his machine(s) after
>
> ata2.00: configured for UDM/33
> ata2.01: configured for MWDMA2
>
> is his own sweet secret.
>
> I thought initially that he possibly gets "crc error", which
> happened to me at the same time, but apparently this is not that and
> starting with 2.6.29-0.28.rc1.fc11 on my hardware current kernels
> boot again.
>
>    Michal
>
> --
> fedora-test-list mailing list
> fedora-test-list at redhat.com
> To unsubscribe:
> https://www.redhat.com/mailman/listinfo/fedora-test-list
>
these are the lines in dmesg in a regular boot: any comment???

scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L200P0   BAH4 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
scsi 1:0:1:0: CD-ROM            HP       CD-Writer+ 7500  1.0a PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
sr 1:0:1:0: Attached scsi CD-ROM sr1
sr 1:0:1:0: Attached scsi generic sg2 type 5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.28-3.fc11.i686 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c480
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.28-3.fc11.i686 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.28-3.fc11.i686 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.28-3.fc11.i686 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.28-3.fc11.i686 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel at redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16379 buckets, 65516 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
  Magic number: 9:138:696
debug: unmapping init memory c089d000..c0a1e000
Write protecting the kernel text: 2916k
Write protecting the kernel read-only data: 1324k
input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input3
console_init used greatest stack depth: 2680 bytes left
modprobe used greatest stack depth: 2456 bytes left
psmouse serio1: ID: 10 00 64<6>usb 2-2: new full speed USB device
using uhci_hcd and address 2
lvm used greatest stack depth: 2352 bytes left
usb 2-2: configuration #1 chosen from 1 choice
usb 2-2: New USB device found, idVendor=04b8, idProduct=010b
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Perfection1240
usb 2-2: Manufacturer: EPSON
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1232044753.492:2): selinux=0 auid=4294967295 ses=4294967295
runlevel used greatest stack depth: 2304 bytes left
hostname used greatest stack depth: 1848 bytes left
mount used greatest stack depth: 1504 bytes left
udev: starting version 135
intel_rng: FWH not detected
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
skge 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
skge 1.13 addr 0xfbffc000 irq 22 chip Yukon-Lite rev 9
skge eth0: addr 00:11:d8:bf:9f:05
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
ne2k-pci 0000:02:0b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
eth1: RealTek RTL-8029 found at 0xec00, IRQ 23, 52:54:05:e5:82:46.
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI
region SMRG [0x400-0x40f]
ACPI: Device needs an ACPI driver
input: PC Speaker as /devices/platform/pcspkr/input/input5
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
ALSA sound/pci/ac97/ac97_codec.c:2127: AC'97 0 analog subsections not ready
ppdev: user-space parallel port driver
modprobe used greatest stack depth: 1008 bytes left
udev: renamed network interface eth1 to eth0
udev: renamed network interface eth0_rename to eth1
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1
extents:1 across:2031608k

-- 
Antonio Montagnani
Skype : antoniomontag