No kernel 2.26.29 is working

[Antonio M]

2009/1/15 Antonio M <antonio.montagnani at gmail.com>:
> 2009/1/15 Michal Jaegermann <michal at harddata.com>:
>> On Thu, Jan 15, 2009 at 03:27:14PM -0300, Horst H. von Brand wrote:
>>> Antonio M <antonio.montagnani at gmail.com> wrote:
>>> > No kernel 2.6.29.x is able to start any of my 3 F11 boxes.
>>>
>>> For me kernel-2.6.29-0.31.rc1.git2.fc11.x86_64 and 0.35 do work (kernels
>>> before that did hang on boot, crash X, ...).
>>>
>>> It could be a broken initrd, a new mkinitrd showed up in updates
>>> today.
>>
>> Antonio is not saying very much what really happens so no wonder
>> that nobody is rushing with an advice.  OTOH from what he eventually
>> posted on https://bugzilla.redhat.com/show_bug.cgi?id=479525#c4 it
>> appears that this is way before initrd comes into play. What is
>> supposed to come on his machine(s) after
>>
>> ata2.00: configured for UDM/33
>> ata2.01: configured for MWDMA2
>>
>> is his own sweet secret.
>>
>> I thought initially that he possibly gets "crc error", which
>> happened to me at the same time, but apparently this is not that and
>> starting with 2.6.29-0.28.rc1.fc11 on my hardware current kernels
>> boot again.
>>
>>    Michal
>>
>> --
>> fedora-test-list mailing list
>> fedora-test-list at redhat.com
>> To unsubscribe:
>> https://www.redhat.com/mailman/listinfo/fedora-test-list
>>
> these are the lines in dmesg in a regular boot: any comment???
>
> scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L200P0   BAH4 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sda] 398297088 512-byte hardware sectors: (203 GB/189 GiB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
>  sda: sda1 sda2
> sd 0:0:0:0: [sda] Attached SCSI disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
> sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> sr 1:0:0:0: Attached scsi generic sg1 type 5
> scsi 1:0:1:0: CD-ROM            HP       CD-Writer+ 7500  1.0a PQ: 0 ANSI: 5
> sr1: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> sr 1:0:1:0: Attached scsi CD-ROM sr1
> sr 1:0:1:0: Attached scsi generic sg2 type 5
> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
> ehci_hcd 0000:00:1d.7: setting latency timer to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:1d.7: debug port 1
> ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
> ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fffc00
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 2.6.28-3.fc11.i686 ehci_hcd
> usb usb1: SerialNumber: 0000:00:1d.7
> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> uhci_hcd: USB Universal Host Controller Interface driver
> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> uhci_hcd 0000:00:1d.0: setting latency timer to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c480
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: UHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.28-3.fc11.i686 uhci_hcd
> usb usb2: SerialNumber: 0000:00:1d.0
> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> uhci_hcd 0000:00:1d.1: setting latency timer to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: UHCI Host Controller
> usb usb3: Manufacturer: Linux 2.6.28-3.fc11.i686 uhci_hcd
> usb usb3: SerialNumber: 0000:00:1d.1
> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> uhci_hcd 0000:00:1d.2: setting latency timer to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: UHCI Host Controller
> usb usb4: Manufacturer: Linux 2.6.28-3.fc11.i686 uhci_hcd
> usb usb4: SerialNumber: 0000:00:1d.2
> uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> uhci_hcd 0000:00:1d.3: setting latency timer to 64
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: UHCI Host Controller
> usb usb5: Manufacturer: Linux 2.6.28-3.fc11.i686 uhci_hcd
> usb usb5: SerialNumber: 0000:00:1d.3
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> rtc_cmos 00:02: RTC can wake from S4
> rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel at redhat.com
> cpuidle: using governor ladder
> cpuidle: using governor menu
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> usbhid: v2.6:USB HID core driver
> nf_conntrack version 0.5.0 (16379 buckets, 65516 max)
> CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
> nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
> sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
> ip_tables: (C) 2000-2006 Netfilter Core Team
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 17
> Using IPI No-Shortcut mode
> registered taskstats version 1
>  Magic number: 9:138:696
> debug: unmapping init memory c089d000..c0a1e000
> Write protecting the kernel text: 2916k
> Write protecting the kernel read-only data: 1324k
> input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input3
> console_init used greatest stack depth: 2680 bytes left
> modprobe used greatest stack depth: 2456 bytes left
> psmouse serio1: ID: 10 00 64<6>usb 2-2: new full speed USB device
> using uhci_hcd and address 2
> lvm used greatest stack depth: 2352 bytes left
> usb 2-2: configuration #1 chosen from 1 choice
> usb 2-2: New USB device found, idVendor=04b8, idProduct=010b
> usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> usb 2-2: Product: Perfection1240
> usb 2-2: Manufacturer: EPSON
> input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux:  Disabled at runtime.
> SELinux:  Unregistering netfilter hooks
> type=1404 audit(1232044753.492:2): selinux=0 auid=4294967295 ses=4294967295
> runlevel used greatest stack depth: 2304 bytes left
> hostname used greatest stack depth: 1848 bytes left
> mount used greatest stack depth: 1504 bytes left
> udev: starting version 135
> intel_rng: FWH not detected
> parport_pc 00:0a: reported by Plug and Play ACPI
> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
> iTCO_vendor_support: vendor-support=0
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
> iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> skge 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> skge 1.13 addr 0xfbffc000 irq 22 chip Yukon-Lite rev 9
> skge eth0: addr 00:11:d8:bf:9f:05
> ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
> ne2k-pci 0000:02:0b.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> eth1: RealTek RTL-8029 found at 0xec00, IRQ 23, 52:54:05:e5:82:46.
> i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI
> region SMRG [0x400-0x40f]
> ACPI: Device needs an ACPI driver
> input: PC Speaker as /devices/platform/pcspkr/input/input5
> Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
> Intel ICH 0000:00:1f.5: setting latency timer to 64
> ALSA sound/pci/ac97/ac97_codec.c:2127: AC'97 0 analog subsections not ready
> ppdev: user-space parallel port driver
> modprobe used greatest stack depth: 1008 bytes left
> udev: renamed network interface eth1 to eth0
> udev: renamed network interface eth0_rename to eth1
> device-mapper: multipath: version 1.0.5 loaded
> EXT3 FS on dm-0, internal journal
> kjournald starting.  Commit interval 5 seconds
> EXT3 FS on sda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01.  Priority:-1
> extents:1 across:2031608k
>
> --
> Antonio Montagnani
> Skype : antoniomontag
>

I mean the missing lines, where system idles...

-- 
Antonio Montagnani
Skype : antoniomontag