[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: No more X on nv card: nVidia Corporation NV34 [GeForce FX 5200]






--- On Tue, 3/3/09, Adam Williamson <awilliam redhat com> wrote:

> From: Adam Williamson <awilliam redhat com>
> Subject: Re: No more X on nv card: nVidia Corporation NV34 [GeForce FX 5200]
> To: olivares14031 yahoo com
> Cc: "For testers of Fedora Core development releases" <fedora-test-list redhat com>
> Date: Tuesday, March 3, 2009, 6:24 PM
> On Tue, 2009-03-03 at 17:51 -0800, Antonio Olivares wrote:
> 
> > Thank you Adam for your post, I believe it is the
> kernel that does not allow the booting :(, booting to an
> older kernel, X works :)
> > 
> > [olivares localhost ~]$ uname -r
> > 2.6.29-0.159.rc6.git3.fc11.i586
> 
> Yep, good catch by Johann, I'd forgotten about that
> one. I believe it's
> a known issue, it's been reported, so it should get
> fixed in a future
> kernel.
> -- 

Booted to 197 kernel no X :(, tried to revert back to 159 kernel and no X :(, mouse pointer stands there and does nothing X never comes in.   Tried to create Xorg.conf file, but it fails :(,  I will wait patiently a newer kernel that works here :)

ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
------------[ cut here ]------------
WARNING: at lib/dma-debug.c:461 check_unmap+0xf6/0x3d8() (Not tainted)
Hardware name: System product name
forcedeth 0000:00:04.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x000000002bbce242] [size=90 bytes]
Modules linked in: nf_conntrack_netbios_ns iptable_nat nf_nat ip6t_REJECT ip6table_filter ip6_tables ipv6 uinput snd_intel8x0 snd_ac97_codec ac97_bus pcspkr snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm 3c59x mii snd_timer snd i2c_nforce2 soundcore snd_page_alloc forcedeth usblp pata_ali sata_vsc sata_svw sata_via pata_pcmcia sata_nv ata_generic pata_acpi pata_amd nouveau drm i2c_core [last unloaded: scsi_wait_scan]
Pid: 0, comm: swapper Not tainted 2.6.29-0.197.rc7.fc11.i586 #1
Call Trace:
 [<c042fe33>] warn_slowpath+0x7c/0xa7
 [<c044e433>] ? find_usage_backwards+0xc8/0xea
 [<c044e433>] ? find_usage_backwards+0xc8/0xea
 [<c04500ad>] ? check_usage+0x29/0x20a
 [<c044f746>] ? mark_lock+0x1e/0x30b
 [<c054a400>] ? check_for_stack+0x55/0x7d
 [<c054a44e>] ? get_hash_bucket+0x26/0x2f
 [<c054abb2>] check_unmap+0xf6/0x3d8
 [<c0430343>] ? release_console_sem+0x1a9/0x1d6
 [<c044f746>] ? mark_lock+0x1e/0x30b
 [<c054b001>] debug_dma_unmap_page+0x5b/0x63
 [<c054b001>] ? debug_dma_unmap_page+0x5b/0x63
 [<f20253ed>] T.908+0x34/0x3f [forcedeth]
 [<f2025433>] nv_tx_done+0x3b/0x187 [forcedeth]
 [<f2025623>] nv_nic_irq+0xa4/0x238 [forcedeth]
 [<c0471177>] handle_IRQ_event+0x22/0x58
 [<c0472598>] handle_fasteoi_irq+0x80/0xb7
 [<c0472518>] ? handle_fasteoi_irq+0x0/0xb7
 <IRQ>  [<c04045ac>] ? common_interrupt+0x2c/0x40
 [<c044fc82>] ? trace_hardirqs_on+0xb/0xd
 [<c041b94c>] ? native_safe_halt+0xa/0xc
 [<c0409703>] ? default_idle+0x4f/0x89
 [<c044ef2d>] ? trace_hardirqs_off+0xb/0xd
 [<c0403010>] ? cpu_idle+0x72/0x92
 [<c06dfde0>] ? rest_init+0x58/0x5a
---[ end trace 1236e4b9bc601b91 ]---
eth0: no IPv6 routers present
eth1:  setting half-duplex.
ADDRCONF(NETDEV_UP): eth1: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
[olivares localhost ~]$ su -
Password:
[root localhost ~]# Xorg -configure

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.1.el5 i686
Current Operating System: Linux localhost.localdomain 2.6.29-0.197.rc7.fc11.i586 #1 SMP Tue Mar 3 23:01:11 EST 2009 i686
Build Date: 03 March 2009  08:22:04PM
Build ID: xorg-x11-server 1.6.0-5.fc11
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar  4 19:48:22 2009
List of video drivers:
        cyrix
        tdfx
        v4l
        siliconmotion
        glint
        openchrome
        i740
        amd
        sis
        dummy
        ati
        sisusb
        r128
        ast
        avivo
        i128
        mach64
        s3virge
        trident
        savage
        nsc
        s3
        intel
        chips
        rendition
        radeon
        neomagic
        nv
        tseng
        ark
        mga
        vmware
        i810
        apm
        voodoo
        vga
        cirrus
        ztv
        geode
        nouveau
        fbdev
        vesa
(EE) module ABI major version (1) doesn't match the server's version (5)
(EE) Failed to load module "cyrix" (module requirement mismatch, 0)
(EE) module ABI major version (4) doesn't match the server's version (5)
(EE) Failed to load module "nsc" (module requirement mismatch, 0)
(EE) module ABI major version (1) doesn't match the server's version (5)
(EE) Failed to load module "vga" (module requirement mismatch, 0)
(++) Using config file: "/root/xorg.conf.new"
Number of created screens does not match number of detected devices.
  Configuration failed.
[root localhost ~]# ls
anaconda-ks.cfg          nodep
com2connect2net          on
connect                  Pictures
descriptions of scripts  plugin_stack.trace
Desktop                  Public
Documents                removexine-1.txt
Download                 rmdup
dup                      scripts.tar.bz2
file_t-1.txt             scsconfig.log
install.log              scsrun.log
install.log.syslog       soundglitch1.txt
livecd                   Templates
mancon                   troubleshoot.txt
mbox                     up2date
Music                    Videos
myiptables.pp            xorg.conf.new
myiptables.te            xorg-x11-drv-nv-2.1.6-3.fc9.i386.rpm
[root localhost ~]# X test xorg.conf.new
Unrecognized option: test
use: X [:<display>] [option]
-a #                   mouse acceleration (pixels)
-ac                    disable access control restrictions
-audit int             set audit trail level
-auth file             select authorization file
-br                    create root window with black background
+bs                    enable any backing store support
-bs                    disable any backing store support
-c                     turns off key-click
c #                    key-click volume (0-100)
-cc int                default color visual class
-core                  generate core dump on fatal error
-dpi int               screen resolution in dots per inch
dpms                   enables VESA DPMS monitor control
-dpms                  disables VESA DPMS monitor control
-deferglyphs [none|all|16] defer loading of [no|all|16-bit] glyphs
-f #                   bell base (0-100)
-fc string             cursor font
-fn string             default font name
-fp string             default font path
-help                  prints message with these options
-I                     ignore all remaining arguments
-ld int                limit data space to N Kb
-lf int                limit number of open files to N
-ls int                limit stack space to N Kb
-logo                  enable logo in screen saver
nologo                 disable logo in screen saver
-nolisten string       don't listen on protocol
-noreset               don't reset after last client exists
-nr                    create root window with no background
-reset                 reset after last client exists
-p #                   screen-saver pattern duration (minutes)
-pn                    accept failure to listen on all ports
-nopn                  reject failure to listen on all ports
-r                     turns off auto-repeat
r                      turns on auto-repeat
-render [default|mono|gray|color] set render color alloc policy
-retro                 start with classic stipple and cursor
-s #                   screen-saver timeout (minutes)
-t #                   mouse threshold (pixels)
-terminate             terminate at server reset
-to #                  connection time out
-tst                   disable testing extensions
ttyxx                  server started from init on /dev/ttyxx
v                      video blanking for screen-saver
-v                     screen-saver without video blanking
-wm                    WhenMapped default backing-store
-wr                    create root window with white background
-x string              loads named extension at init time
-maxbigreqsize         set maximal bigrequest size
+xinerama              Enable XINERAMA extension
-xinerama              Disable XINERAMA extension
-dumbSched             Disable smart scheduling, enable old behavior
-schedInterval int     Set scheduler interval in msec
+extension name        Enable extension
-extension name        Disable extension
-query host-name       contact named host for XDMCP
-broadcast             broadcast for XDMCP
-multicast [addr [hops]] IPv6 multicast for XDMCP
-indirect host-name    contact named host for indirect XDMCP
-port port-num         UDP port number to send messages to
-from local-address    specify the local address to connect from
-once                  Terminate server after one session
-class display-class   specify display class to send in manage
-cookie xdm-auth-bits  specify the magic cookie for XDMCP
-displayID display-id  manufacturer display ID for request
-kb                    disable the X Keyboard Extension
+kb                    enable the X Keyboard Extension
[+-]accessx [ timeout [ timeout_mask [ feedback [ options_mask] ] ] ]
                       enable/disable accessx key sequences
-ardelay               set XKB autorepeat delay
-arinterval            set XKB autorepeat interval


Device Dependent Usage
-modulepath paths      specify the module search path
-logfile file          specify a log file name
-configure             probe for devices and write an xorg.conf
-showopts              print available options for all installed drivers
-modalias              output a modalias-style filter for each driver installed
-config file           specify a configuration file, relative to the
                       xorg.conf search path, only root can use absolute
-probeonly             probe for devices, then exit
-verbose [n]           verbose startup messages
-logverbose [n]        verbose log messages
-quiet                 minimal startup messages
-pixmap24              use 24bpp pixmaps for depth 24
-pixmap32              use 32bpp pixmaps for depth 24
-fbbpp n               set bpp for the framebuffer. Default: 8
-depth n               set colour depth. Default: 8
-gamma f               set gamma value (0.1 < f < 10.0) Default: 1.0
-rgamma f              set gamma value for red phase
-ggamma f              set gamma value for green phase
-bgamma f              set gamma value for blue phase
-weight nnn            set RGB weighting at 16 bpp.  Default: 565
-layout name           specify the ServerLayout section name
-screen name           specify the Screen section name
-keyboard name         specify the core keyboard InputDevice name
-pointer name          specify the core pointer InputDevice name
-nosilk                disable Silken Mouse
-flipPixels            swap default black/white Pixel values
-disableVidMode        disable mode adjustments with xvidtune
Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        Screen      1  "Screen1" RightOf "Screen0"
        Screen      2  "Screen2" RightOf "Screen1"
        Screen      3  "Screen3" RightOf "Screen2"
        Screen      4  "Screen4" RightOf "Screen3"
        Screen      5  "Screen5" RightOf "Screen4"
        Screen      6  "Screen6" RightOf "Screen5"
        Screen      7  "Screen7" RightOf "Screen6"
        Screen      8  "Screen8" RightOf "Screen7"
        Screen      9  "Screen9" RightOf "Screen8"
        Screen     10  "Screen10" RightOf "Screen9"
        Screen     11  "Screen11" RightOf "Screen10"
        Screen     12  "Screen12" RightOf "Screen11"
        Screen     13  "Screen13" RightOf "Screen12"
        Screen     14  "Screen14" RightOf "Screen13"
        Screen     15  "Screen15" RightOf "Screen14"
        Screen     16  "Screen16" RightOf "Screen15"
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        ModulePath   "/usr/lib/xorg/modules"
        FontPath     "catalogue:/etc/X11/fontpath.d"
        FontPath     "built-ins"
EndSection

Section "Module"
        Load  "vnc"
        Load  "dbe"
        Load  "dri2"
        Load  "glx"
        Load  "record"
        Load  "dri"
        Load  "extmod"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/input/mice"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor1"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor2"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor3"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor4"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor5"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor6"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor7"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor8"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor9"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor10"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor11"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor12"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor13"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor14"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor15"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Monitor"
        Identifier   "Monitor16"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
        Identifier  "Card0"
        Driver      "nv"
        VendorName  "nVidia Corporation"
        BoardName   "NV34 [GeForce FX 5200]"
        BusID       "PCI:2:0:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
        Identifier  "Card1"
        Driver      "nv"
        VendorName  "nVidia Corporation"
        BoardName   "nForce2 IGP2"
        BusID       "PCI:0:0:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
        Identifier  "Card2"
        Driver      "nv"
        VendorName  "nVidia Corporation"
        BoardName   "nForce2 Memory Controller 1"
        BusID       "PCI:0:0:1"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
        Identifier  "Card3"
        Driver      "nv"
        VendorName  "nVidia Corporation"
        BoardName   "nForce2 Memory Controller 4"
        BusID       "PCI:0:0:2"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
        Identifier  "Card4"
        Driver      "nv"
        VendorName  "nVidia Corporation"
        BoardName   "nForce2 Memory Controller 3"
        BusID       "PCI:0:0:3"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
        Identifier  "Card5"
        Driver      "nv"
        VendorName  "nVidia Corporation"
        BoardName   "nForce2 Memory Controller 2"
        BusID       "PCI:0:0:4"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
        Identifier  "Card6"
        Driver      "nv"
        VendorName  "nVidia Corporation"
        BoardName   "nForce2 Memory Controller 5"
        BusID       "PCI:0:0:5"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
        Identifier  "Card7"
        Driver      "nv"
        VendorName  "nVidia Corporation"
        BoardName   "nForce2 ISA Bridge"
        BusID       "PCI:0:1:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
        Identifier  "Card8"
        Driver      "nv"
        VendorName  "nVidia Corporation"
        BoardName   "nForce2 SMBus (MCP)"
        BusID       "PCI:0:1:1"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
        Identifier  "Card9"
        Driver      "nv"
        VendorName  "nVidia Corporation"
        BoardName   "nForce2 USB Controller"
        BusID       "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
        Identifier  "Card10"
        Driver      "nv"
        VendorName  "nVidia Corporation"
        BoardName   "nForce2 USB Controller"
        BusID       "PCI:0:2:1"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
        Identifier  "Card11"
        Driver      "nv"
        VendorName  "nVidia Corporation"
        BoardName   "nForce2 USB Controller"
        BusID       "PCI:0:2:2"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "SWcursor"                  # [<bool>]
        #Option     "HWcursor"                  # [<bool>]
        #Option     "NoAccel"                   # [<bool>]
        #Option     "ShadowFB"                  # [<bool>]
        #Option     "UseFBDev"                  # [<bool>]
        #Option     "Rotate"                    # [<str>]
        #Option     "VideoKey"                  # <i>
        #Option     "FlatPanel"                 # [<bool>]
        #Option     "FPDither"                  # [<bool>]
        #Option     "CrtcNumber"                # <i>
        #Option     "FPScale"                   # [<bool>]
        #Option     "FPTweak"                   # <i>
        #Option     "DualHead"                  # [<bool>]
        Identifier  "Card12"
        Driver      "nv"
        VendorName  "nVidia Corporation"
        BoardName   "nForce2 Ethernet Controller"
You have mail in /var/spool/mail/root
[root localhost ~]# Xorg -configure

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.1.el5 i686
Current Operating System: Linux localhost.localdomain 2.6.29-0.197.rc7.fc11.i586 #1 SMP Tue Mar 3 23:01:11 EST 2009 i686
Build Date: 03 March 2009  08:22:04PM
Build ID: xorg-x11-server 1.6.0-5.fc11
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar  4 19:49:41 2009
List of video drivers:
        cyrix
        tdfx
        v4l
        siliconmotion
        glint
        openchrome
        i740
        amd
        sis
        dummy
        ati
        sisusb
        r128
        ast
        avivo
        i128
        mach64
        s3virge
        trident
        savage
        nsc
        s3
        intel
        chips
        rendition
        radeon
        neomagic
        nv
        tseng
        ark
        mga
        vmware
        i810
        apm
        voodoo
        vga
        cirrus
        ztv
        geode
        nouveau
        fbdev
        vesa
(EE) module ABI major version (1) doesn't match the server's version (5)
(EE) Failed to load module "cyrix" (module requirement mismatch, 0)
(EE) module ABI major version (4) doesn't match the server's version (5)
(EE) Failed to load module "nsc" (module requirement mismatch, 0)
(EE) module ABI major version (1) doesn't match the server's version (5)
(EE) Failed to load module "vga" (module requirement mismatch, 0)
(++) Using config file: "/root/xorg.conf.new"
Number of created screens does not match number of detected devices.
  Configuration failed.
[root localhost ~]# startx
xauth:  creating new authority file /root/.serverauth.2882

X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.1.el5 i686
Current Operating System: Linux localhost.localdomain 2.6.29-0.197.rc7.fc11.i586 #1 SMP Tue Mar 3 23:01:11 EST 2009 i686
Build Date: 03 March 2009  08:22:04PM

Used Slax Live CD to send this, since Fedora rawhide boots but no X :(  

Regards,

Antonio 


      


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]