[Fedora-users-br] Mod Rewrite
Jean Carlo
jean.c.goncalves em gmail.com
Sex Nov 28 00:22:18 UTC 2008
tenho um .htaccess escrito assim
# << URLs Amigaveis
RewriteEngine On
RewriteCond %{SCRIPT_FILENAME} !-f
RewriteCond %{SCRIPT_FILENAME} !-d
RewriteRule ^(.*)$ index.php
# >> URLs Amigaveis
No trabalho está tudo funcionando.
if($_SERVER['HTTP_HOST'] == 'localhost'):
array_shift($uri);
array_shift($uri);
array_shift($uri);
define('DIR',$_SERVER['DOCUMENT_ROOT'].'/jean/');
define('URL','http://'.$_SERVER['HTTP_HOST'].'/jean/');
Aqui eu pego a URL
2008/11/27 Gabriel Lovison <gabriel.lovison em gmail.com>:
> Aparentemente está certo, qdo vc roda o httpd não dá nenhum erro???
> Como vc está tentando acessar o servidor?
>
> On Thu, Nov 27, 2008 at 10:11 PM, Jean Carlo <jean.c.goncalves em gmail.com>
> wrote:
>>
>> Fedora 9
>>
>> #
>> # This is the main Apache server configuration file. It contains the
>> # configuration directives that give the server its instructions.
>> # See <URL:http://httpd.apache.org/docs/2.2/> for detailed information.
>> # In particular, see
>> # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
>> # for a discussion of each configuration directive.
>> #
>> #
>> # Do NOT simply read the instructions in here without understanding
>> # what they do. They're here only as hints or reminders. If you are
>> unsure
>> # consult the online docs. You have been warned.
>> #
>> # The configuration directives are grouped into three basic sections:
>> # 1. Directives that control the operation of the Apache server process
>> as a
>> # whole (the 'global environment').
>> # 2. Directives that define the parameters of the 'main' or 'default'
>> server,
>> # which responds to requests that aren't handled by a virtual host.
>> # These directives also provide default values for the settings
>> # of all virtual hosts.
>> # 3. Settings for virtual hosts, which allow Web requests to be sent to
>> # different IP addresses or hostnames and have them handled by the
>> # same Apache server process.
>> #
>> # Configuration and logfile names: If the filenames you specify for many
>> # of the server's control files begin with "/" (or "drive:/" for Win32),
>> the
>> # server will use that explicit path. If the filenames do *not* begin
>> # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
>> # with ServerRoot set to "/etc/httpd" will be interpreted by the
>> # server as "/etc/httpd/logs/foo.log".
>> #
>>
>> ### Section 1: Global Environment
>> #
>> # The directives in this section affect the overall operation of Apache,
>> # such as the number of concurrent requests it can handle or where it
>> # can find its configuration files.
>> #
>>
>> #
>> # Don't give away too much information about all the subcomponents
>> # we are running. Comment out this line if you don't mind remote sites
>> # finding out what major optional modules you are running
>> ServerTokens OS
>>
>> #
>> # ServerRoot: The top of the directory tree under which the server's
>> # configuration, error, and log files are kept.
>> #
>> # NOTE! If you intend to place this on an NFS (or otherwise network)
>> # mounted filesystem then please read the LockFile documentation
>> # (available at
>> <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>);
>> # you will save yourself a lot of trouble.
>> #
>> # Do NOT add a slash at the end of the directory path.
>> #
>> ServerRoot "/etc/httpd"
>>
>> #
>> # PidFile: The file in which the server should record its process
>> # identification number when it starts.
>> #
>> PidFile run/httpd.pid
>>
>> #
>> # Timeout: The number of seconds before receives and sends time out.
>> #
>> Timeout 120
>>
>> #
>> # KeepAlive: Whether or not to allow persistent connections (more than
>> # one request per connection). Set to "Off" to deactivate.
>> #
>> KeepAlive Off
>>
>> #
>> # MaxKeepAliveRequests: The maximum number of requests to allow
>> # during a persistent connection. Set to 0 to allow an unlimited amount.
>> # We recommend you leave this number high, for maximum performance.
>> #
>> MaxKeepAliveRequests 100
>>
>> #
>> # KeepAliveTimeout: Number of seconds to wait for the next request from
>> the
>> # same client on the same connection.
>> #
>> KeepAliveTimeout 15
>>
>> ##
>> ## Server-Pool Size Regulation (MPM specific)
>> ##
>>
>> # prefork MPM
>> # StartServers: number of server processes to start
>> # MinSpareServers: minimum number of server processes which are kept spare
>> # MaxSpareServers: maximum number of server processes which are kept spare
>> # ServerLimit: maximum value for MaxClients for the lifetime of the server
>> # MaxClients: maximum number of server processes allowed to start
>> # MaxRequestsPerChild: maximum number of requests a server process serves
>> <IfModule prefork.c>
>> StartServers 8
>> MinSpareServers 5
>> MaxSpareServers 20
>> ServerLimit 256
>> MaxClients 256
>> MaxRequestsPerChild 4000
>> </IfModule>
>>
>>
>> # worker MPM
>> # StartServers: initial number of server processes to start
>> # MaxClients: maximum number of simultaneous client connections
>> # MinSpareThreads: minimum number of worker threads which are kept spare
>> # MaxSpareThreads: maximum number of worker threads which are kept spare
>> # ThreadsPerChild: constant number of worker threads in each server
>> process
>> # MaxRequestsPerChild: maximum number of requests a server process serves
>> <IfModule worker.c>
>> StartServers 2
>> MaxClients 150
>> MinSpareThreads 25
>> MaxSpareThreads 75
>> ThreadsPerChild 25
>> MaxRequestsPerChild 0
>> </IfModule>
>>
>> #
>> # Listen: Allows you to bind Apache to specific IP addresses and/or
>> # ports, in addition to the default. See also the <VirtualHost>
>> # directive.
>> #
>> # Change this to Listen on specific IP addresses as shown below to
>> # prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
>> #
>> #Listen 12.34.56.78:80
>> Listen 80
>>
>> #
>> # Dynamic Shared Object (DSO) Support
>> #
>> # To be able to use the functionality of a module which was built as a DSO
>> you
>> # have to place corresponding `LoadModule' lines at this location so the
>> # directives contained in it are actually available _before_ they are
>> used.
>> # Statically compiled modules (those listed by `httpd -l') do not need
>> # to be loaded here.
>> #
>> # Example:
>> # LoadModule foo_module modules/mod_foo.so
>> #
>> LoadModule auth_basic_module modules/mod_auth_basic.so
>> LoadModule auth_digest_module modules/mod_auth_digest.so
>> LoadModule authn_file_module modules/mod_authn_file.so
>> LoadModule authn_alias_module modules/mod_authn_alias.so
>> LoadModule authn_anon_module modules/mod_authn_anon.so
>> LoadModule authn_dbm_module modules/mod_authn_dbm.so
>> LoadModule authn_default_module modules/mod_authn_default.so
>> LoadModule authz_host_module modules/mod_authz_host.so
>> LoadModule authz_user_module modules/mod_authz_user.so
>> LoadModule authz_owner_module modules/mod_authz_owner.so
>> LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
>> LoadModule authz_dbm_module modules/mod_authz_dbm.so
>> LoadModule authz_default_module modules/mod_authz_default.so
>> LoadModule ldap_module modules/mod_ldap.so
>> LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
>> LoadModule include_module modules/mod_include.so
>> LoadModule log_config_module modules/mod_log_config.so
>> LoadModule logio_module modules/mod_logio.so
>> LoadModule env_module modules/mod_env.so
>> LoadModule ext_filter_module modules/mod_ext_filter.so
>> LoadModule mime_magic_module modules/mod_mime_magic.so
>> LoadModule expires_module modules/mod_expires.so
>> LoadModule deflate_module modules/mod_deflate.so
>> LoadModule headers_module modules/mod_headers.so
>> LoadModule usertrack_module modules/mod_usertrack.so
>> LoadModule setenvif_module modules/mod_setenvif.so
>> LoadModule mime_module modules/mod_mime.so
>> LoadModule dav_module modules/mod_dav.so
>> LoadModule status_module modules/mod_status.so
>> LoadModule autoindex_module modules/mod_autoindex.so
>> LoadModule info_module modules/mod_info.so
>> LoadModule dav_fs_module modules/mod_dav_fs.so
>> LoadModule vhost_alias_module modules/mod_vhost_alias.so
>> LoadModule negotiation_module modules/mod_negotiation.so
>> LoadModule dir_module modules/mod_dir.so
>> LoadModule actions_module modules/mod_actions.so
>> LoadModule speling_module modules/mod_speling.so
>> LoadModule userdir_module modules/mod_userdir.so
>> LoadModule alias_module modules/mod_alias.so
>> LoadModule rewrite_module modules/mod_rewrite.so
>> LoadModule proxy_module modules/mod_proxy.so
>> LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
>> LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
>> LoadModule proxy_http_module modules/mod_proxy_http.so
>> LoadModule proxy_connect_module modules/mod_proxy_connect.so
>> LoadModule cache_module modules/mod_cache.so
>> LoadModule suexec_module modules/mod_suexec.so
>> LoadModule disk_cache_module modules/mod_disk_cache.so
>> LoadModule file_cache_module modules/mod_file_cache.so
>> LoadModule mem_cache_module modules/mod_mem_cache.so
>> LoadModule cgi_module modules/mod_cgi.so
>>
>>
>>
>> #
>> # The following modules are not loaded by default:
>> #
>> #LoadModule cern_meta_module modules/mod_cern_meta.so
>> #LoadModule asis_module modules/mod_asis.so
>>
>> #
>> # Load config files from the config directory "/etc/httpd/conf.d".
>> #
>> Include conf.d/*.conf
>>
>> #
>> # ExtendedStatus controls whether Apache will generate "full" status
>> # information (ExtendedStatus On) or just basic information
>> (ExtendedStatus
>> # Off) when the "server-status" handler is called. The default is Off.
>> #
>> #ExtendedStatus On
>>
>> #
>> # If you wish httpd to run as a different user or group, you must run
>> # httpd as root initially and it will switch.
>> #
>> # User/Group: The name (or #number) of the user/group to run httpd as.
>> # . On SCO (ODT 3) use "User nouser" and "Group nogroup".
>> # . On HPUX you may not be able to use shared memory as nobody, and the
>> # suggested workaround is to create a user www and use that user.
>> # NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
>> # when the value of (unsigned)Group is above 60000;
>> # don't use Group #-1 on these systems!
>> #
>> User apache
>> Group apache
>>
>> ### Section 2: 'Main' server configuration
>> #
>> # The directives in this section set up the values used by the 'main'
>> # server, which responds to any requests that aren't handled by a
>> # <VirtualHost> definition. These values also provide defaults for
>> # any <VirtualHost> containers you may define later in the file.
>> #
>> # All of these directives may appear inside <VirtualHost> containers,
>> # in which case these default settings will be overridden for the
>> # virtual host being defined.
>> #
>>
>> #
>> # ServerAdmin: Your address, where problems with the server should be
>> # e-mailed. This address appears on some server-generated pages, such
>> # as error documents. e.g. admin em your-domain.com
>> #
>> ServerAdmin root em localhost
>>
>> #
>> # ServerName gives the name and port that the server uses to identify
>> itself.
>> # This can often be determined automatically, but we recommend you specify
>> # it explicitly to prevent problems during startup.
>> #
>> # If this is not set to valid DNS name for your host, server-generated
>> # redirections will not work. See also the UseCanonicalName directive.
>> #
>> # If your host doesn't have a registered DNS name, enter its IP address
>> here.
>> # You will have to access it by its address anyway, and this will make
>> # redirections work in a sensible way.
>> #
>> #ServerName www.example.com:80
>>
>> #
>> # UseCanonicalName: Determines how Apache constructs self-referencing
>> # URLs and the SERVER_NAME and SERVER_PORT variables.
>> # When set "Off", Apache will use the Hostname and Port supplied
>> # by the client. When set "On", Apache will use the value of the
>> # ServerName directive.
>> #
>> UseCanonicalName Off
>>
>> #
>> # DocumentRoot: The directory out of which you will serve your
>> # documents. By default, all requests are taken from this directory, but
>> # symbolic links and aliases may be used to point to other locations.
>> #
>> DocumentRoot "/var/www/"
>>
>> #
>> # Each directory to which Apache has access can be configured with respect
>> # to which services and features are allowed and/or disabled in that
>> # directory (and its subdirectories).
>> #
>> # First, we configure the "default" to be a very restrictive set of
>> # features.
>> #
>> <Directory />
>> Options FollowSymLinks
>> AllowOverride None
>> </Directory>
>>
>> #
>> # Note that from this point forward you must specifically allow
>> # particular features to be enabled - so if something's not working as
>> # you might expect, make sure that you have specifically enabled it
>> # below.
>> #
>>
>> #
>> # This should be changed to whatever you set DocumentRoot to.
>> #
>> <Directory "/var/www/html">
>>
>> #
>> # Possible values for the Options directive are "None", "All",
>> # or any combination of:
>> # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI
>> MultiViews
>> #
>> # Note that "MultiViews" must be named *explicitly* --- "Options All"
>> # doesn't give it to you.
>> #
>> # The Options directive is both complicated and important. Please see
>> # http://httpd.apache.org/docs/2.2/mod/core.html#options
>> # for more information.
>> #
>> Options Indexes FollowSymLinks
>>
>>
>> #
>> # AllowOverride controls what directives may be placed in .htaccess files.
>> # It can be "All", "None", or any combination of the keywords:
>> # Options FileInfo AuthConfig Limit
>> #
>>
>> RewriteEngine on
>> AllowOverride All
>>
>> #
>> # Controls who can get stuff from this server.
>> #
>> Order allow,deny
>> Allow from all
>>
>> </Directory>
>>
>> #
>> # UserDir: The name of the directory that is appended onto a user's home
>> # directory if a ~user request is received.
>> #
>> # The path to the end user account 'public_html' directory must be
>> # accessible to the webserver userid. This usually means that ~userid
>> # must have permissions of 711, ~userid/public_html must have permissions
>> # of 755, and documents contained therein must be world-readable.
>> # Otherwise, the client will only receive a "403 Forbidden" message.
>> #
>> # See also: http://httpd.apache.org/docs/misc/FAQ.html#forbidden
>> #
>> <IfModule mod_userdir.c>
>> #
>> # UserDir is disabled by default since it can confirm the presence
>> # of a username on the system (depending on home directory
>> # permissions).
>> #
>> UserDir disable
>>
>> #
>> # To enable requests to /~user/ to serve the user's public_html
>> # directory, remove the "UserDir disable" line above, and uncomment
>> # the following line instead:
>> #
>> #UserDir public_html
>>
>> </IfModule>
>>
>> #
>> # Control access to UserDir directories. The following is an example
>> # for a site where these directories are restricted to read-only.
>> #
>> #<Directory /home/*/public_html>
>> # AllowOverride FileInfo AuthConfig Limit
>> # Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
>> # <Limit GET POST OPTIONS>
>> # Order allow,deny
>> # Allow from all
>> # </Limit>
>> # <LimitExcept GET POST OPTIONS>
>> # Order deny,allow
>> # Deny from all
>> # </LimitExcept>
>> #</Directory>
>>
>> #
>> # DirectoryIndex: sets the file that Apache will serve if a directory
>> # is requested.
>> #
>> # The index.html.var file (a type-map) is used to deliver content-
>> # negotiated documents. The MultiViews Option can be used for the
>> # same purpose, but it is much slower.
>> #
>> DirectoryIndex index.html index.html.var
>>
>> #
>> # AccessFileName: The name of the file to look for in each directory
>> # for additional configuration directives. See also the AllowOverride
>> # directive.
>> #
>> AccessFileName .htaccess
>>
>> #
>> # The following lines prevent .htaccess and .htpasswd files from being
>> # viewed by Web clients.
>> #
>> <Files ~ "^\.ht">
>> Order allow,deny
>> Deny from all
>> </Files>
>>
>> #
>> # TypesConfig describes where the mime.types file (or equivalent) is
>> # to be found.
>> #
>> TypesConfig /etc/mime.types
>>
>> #
>> # DefaultType is the default MIME type the server will use for a document
>> # if it cannot otherwise determine one, such as from filename extensions.
>> # If your server contains mostly text or HTML documents, "text/plain" is
>> # a good value. If most of your content is binary, such as applications
>> # or images, you may want to use "application/octet-stream" instead to
>> # keep browsers from trying to display binary files as though they are
>> # text.
>> #
>> DefaultType text/plain
>>
>> #
>> # The mod_mime_magic module allows the server to use various hints from
>> the
>> # contents of the file itself to determine its type. The MIMEMagicFile
>> # directive tells the module where the hint definitions are located.
>> #
>> <IfModule mod_mime_magic.c>
>> # MIMEMagicFile /usr/share/magic.mime
>> MIMEMagicFile conf/magic
>> </IfModule>
>>
>> #
>> # HostnameLookups: Log the names of clients or just their IP addresses
>> # e.g., www.apache.org (on) or 204.62.129.132 (off).
>> # The default is off because it'd be overall better for the net if people
>> # had to knowingly turn this feature on, since enabling it means that
>> # each client request will result in AT LEAST one lookup request to the
>> # nameserver.
>> #
>> HostnameLookups Off
>>
>> #
>> # EnableMMAP: Control whether memory-mapping is used to deliver
>> # files (assuming that the underlying OS supports it).
>> # The default is on; turn this off if you serve from NFS-mounted
>> # filesystems. On some systems, turning it off (regardless of
>> # filesystem) can improve performance; for details, please see
>> # http://httpd.apache.org/docs/2.2/mod/core.html#enablemmap
>> #
>> #EnableMMAP off
>>
>> #
>> # EnableSendfile: Control whether the sendfile kernel support is
>> # used to deliver files (assuming that the OS supports it).
>> # The default is on; turn this off if you serve from NFS-mounted
>> # filesystems. Please see
>> # http://httpd.apache.org/docs/2.2/mod/core.html#enablesendfile
>> #
>> #EnableSendfile off
>>
>> #
>> # ErrorLog: The location of the error log file.
>> # If you do not specify an ErrorLog directive within a <VirtualHost>
>> # container, error messages relating to that virtual host will be
>> # logged here. If you *do* define an error logfile for a <VirtualHost>
>> # container, that host's errors will be logged there and not here.
>> #
>> ErrorLog logs/error_log
>>
>> #
>> # LogLevel: Control the number of messages logged to the error_log.
>> # Possible values include: debug, info, notice, warn, error, crit,
>> # alert, emerg.
>> #
>> LogLevel warn
>>
>> #
>> # The following directives define some format nicknames for use with
>> # a CustomLog directive (see below).
>> #
>> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
>> \"%{User-Agent}i\"" combined
>> LogFormat "%h %l %u %t \"%r\" %>s %b" common
>> LogFormat "%{Referer}i -> %U" referer
>> LogFormat "%{User-agent}i" agent
>>
>> # "combinedio" includes actual counts of actual bytes received (%I)
>> and sent (%O); this
>> # requires the mod_logio module to be loaded.
>> #LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\"
>> \"%{User-Agent}i\" %I %O" combinedio
>>
>> #
>> # The location and format of the access logfile (Common Logfile Format).
>> # If you do not define any access logfiles within a <VirtualHost>
>> # container, they will be logged here. Contrariwise, if you *do*
>> # define per-<VirtualHost> access logfiles, transactions will be
>> # logged therein and *not* in this file.
>> #
>> #CustomLog logs/access_log common
>>
>> #
>> # If you would like to have separate agent and referer logfiles, uncomment
>> # the following directives.
>> #
>> #CustomLog logs/referer_log referer
>> #CustomLog logs/agent_log agent
>>
>> #
>> # For a single logfile with access, agent, and referer information
>> # (Combined Logfile Format), use the following directive:
>> #
>> CustomLog logs/access_log combined
>>
>> #
>> # Optionally add a line containing the server version and virtual host
>> # name to server-generated pages (internal error documents, FTP directory
>> # listings, mod_status and mod_info output etc., but not CGI generated
>> # documents or custom error documents).
>> # Set to "EMail" to also include a mailto: link to the ServerAdmin.
>> # Set to one of: On | Off | EMail
>> #
>> ServerSignature On
>>
>> #
>> # Aliases: Add here as many aliases as you need (with no limit). The
>> format is
>> # Alias fakename realname
>> #
>> # Note that if you include a trailing / on fakename then the server will
>> # require it to be present in the URL. So "/icons" isn't aliased in this
>> # example, only "/icons/". If the fakename is slash-terminated, then the
>> # realname must also be slash terminated, and if the fakename omits the
>> # trailing slash, the realname must also omit it.
>> #
>> # We include the /icons/ alias for FancyIndexed directory listings. If
>> you
>> # do not use FancyIndexing, you may comment this out.
>> #
>> Alias /icons/ "/var/www/icons/"
>>
>> <Directory "/var/www/icons">
>> Options Indexes MultiViews FollowSymLinks
>> AllowOverride None
>> Order allow,deny
>> Allow from all
>> </Directory>
>>
>> #
>> # WebDAV module configuration section.
>> #
>> <IfModule mod_dav_fs.c>
>> # Location of the WebDAV lock database.
>> DAVLockDB /var/lib/dav/lockdb
>> </IfModule>
>>
>> #
>> # ScriptAlias: This controls which directories contain server scripts.
>> # ScriptAliases are essentially the same as Aliases, except that
>> # documents in the realname directory are treated as applications and
>> # run by the server when requested rather than as documents sent to the
>> client.
>> # The same rules about trailing "/" apply to ScriptAlias directives as to
>> # Alias.
>> #
>> ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
>>
>> #
>> # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
>> # CGI directory exists, if you have that configured.
>> #
>> <Directory "/var/www/cgi-bin">
>> AllowOverride None
>> Options None
>> Order allow,deny
>> Allow from all
>> </Directory>
>>
>> #
>> # Redirect allows you to tell clients about documents which used to exist
>> in
>> # your server's namespace, but do not anymore. This allows you to tell the
>> # clients where to look for the relocated document.
>> # Example:
>> # Redirect permanent /foo http://www.example.com/bar
>>
>> #
>> # Directives controlling the display of server-generated directory
>> listings.
>> #
>>
>> #
>> # IndexOptions: Controls the appearance of server-generated directory
>> # listings.
>> #
>> IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable
>>
>> #
>> # AddIcon* directives tell the server which icon to show for different
>> # files or filename extensions. These are only displayed for
>> # FancyIndexed directories.
>> #
>> AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
>>
>> AddIconByType (TXT,/icons/text.gif) text/*
>> AddIconByType (IMG,/icons/image2.gif) image/*
>> AddIconByType (SND,/icons/sound2.gif) audio/*
>> AddIconByType (VID,/icons/movie.gif) video/*
>>
>> AddIcon /icons/binary.gif .bin .exe
>> AddIcon /icons/binhex.gif .hqx
>> AddIcon /icons/tar.gif .tar
>> AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
>> AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
>> AddIcon /icons/a.gif .ps .ai .eps
>> AddIcon /icons/layout.gif .html .shtml .htm .pdf
>> AddIcon /icons/text.gif .txt
>> AddIcon /icons/c.gif .c
>> AddIcon /icons/p.gif .pl .py
>> AddIcon /icons/f.gif .for
>> AddIcon /icons/dvi.gif .dvi
>> AddIcon /icons/uuencoded.gif .uu
>> AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
>> AddIcon /icons/tex.gif .tex
>> AddIcon /icons/bomb.gif core
>>
>> AddIcon /icons/back.gif ..
>> AddIcon /icons/hand.right.gif README
>> AddIcon /icons/folder.gif ^^DIRECTORY^^
>> AddIcon /icons/blank.gif ^^BLANKICON^^
>>
>> #
>> # DefaultIcon is which icon to show for files which do not have an icon
>> # explicitly set.
>> #
>> DefaultIcon /icons/unknown.gif
>>
>> #
>> # AddDescription allows you to place a short description after a file in
>> # server-generated indexes. These are only displayed for FancyIndexed
>> # directories.
>> # Format: AddDescription "description" filename
>> #
>> #AddDescription "GZIP compressed document" .gz
>> #AddDescription "tar archive" .tar
>> #AddDescription "GZIP compressed tar archive" .tgz
>>
>> #
>> # ReadmeName is the name of the README file the server will look for by
>> # default, and append to directory listings.
>> #
>> # HeaderName is the name of a file which should be prepended to
>> # directory indexes.
>> ReadmeName README.html
>> HeaderName HEADER.html
>>
>> #
>> # IndexIgnore is a set of filenames which directory indexing should ignore
>> # and not include in the listing. Shell-style wildcarding is permitted.
>> #
>> IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
>>
>> #
>> # DefaultLanguage and AddLanguage allows you to specify the language of
>> # a document. You can then use content negotiation to give a browser a
>> # file in a language the user can understand.
>> #
>> # Specify a default language. This means that all data
>> # going out without a specific language tag (see below) will
>> # be marked with this one. You probably do NOT want to set
>> # this unless you are sure it is correct for all cases.
>> #
>> # * It is generally better to not mark a page as
>> # * being a certain language than marking it with the wrong
>> # * language!
>> #
>> # DefaultLanguage nl
>> #
>> # Note 1: The suffix does not have to be the same as the language
>> # keyword --- those with documents in Polish (whose net-standard
>> # language code is pl) may wish to use "AddLanguage pl .po" to
>> # avoid the ambiguity with the common suffix for perl scripts.
>> #
>> # Note 2: The example entries below illustrate that in some cases
>> # the two character 'Language' abbreviation is not identical to
>> # the two character 'Country' code for its country,
>> # E.g. 'Danmark/dk' versus 'Danish/da'.
>> #
>> # Note 3: In the case of 'ltz' we violate the RFC by using a three char
>> # specifier. There is 'work in progress' to fix this and get
>> # the reference data for rfc1766 cleaned up.
>> #
>> # Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
>> # English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German
>> (de)
>> # Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
>> # Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
>> # Norwegian (no) - Polish (pl) - Portugese (pt)
>> # Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
>> # Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
>> #
>> AddLanguage ca .ca
>> AddLanguage cs .cz .cs
>> AddLanguage da .dk
>> AddLanguage de .de
>> AddLanguage el .el
>> AddLanguage en .en
>> AddLanguage eo .eo
>> AddLanguage es .es
>> AddLanguage et .et
>> AddLanguage fr .fr
>> AddLanguage he .he
>> AddLanguage hr .hr
>> AddLanguage it .it
>> AddLanguage ja .ja
>> AddLanguage ko .ko
>> AddLanguage ltz .ltz
>> AddLanguage nl .nl
>> AddLanguage nn .nn
>> AddLanguage no .no
>> AddLanguage pl .po
>> AddLanguage pt .pt
>> AddLanguage pt-BR .pt-br
>> AddLanguage ru .ru
>> AddLanguage sv .sv
>> AddLanguage zh-CN .zh-cn
>> AddLanguage zh-TW .zh-tw
>>
>> #
>> # LanguagePriority allows you to give precedence to some languages
>> # in case of a tie during content negotiation.
>> #
>> # Just list the languages in decreasing order of preference. We have
>> # more or less alphabetized them here. You probably want to change this.
>> #
>> LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl
>> nn no pl pt pt-BR ru sv zh-CN zh-TW
>>
>> #
>> # ForceLanguagePriority allows you to serve a result page rather than
>> # MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE
>> (Fallback)
>> # [in case no accepted languages matched the available variants]
>> #
>> ForceLanguagePriority Prefer Fallback
>>
>> #
>> # Specify a default charset for all content served; this enables
>> # interpretation of all content as UTF-8 by default. To use the
>> # default browser choice (ISO-8859-1), or to allow the META tags
>> # in HTML content to override this choice, comment out this
>> # directive:
>> #
>> AddDefaultCharset UTF-8
>>
>> #
>> # AddType allows you to add to or override the MIME configuration
>> # file mime.types for specific file types.
>> #
>> #AddType application/x-tar .tgz
>>
>> #
>> # AddEncoding allows you to have certain browsers uncompress
>> # information on the fly. Note: Not all browsers support this.
>> # Despite the name similarity, the following Add* directives have nothing
>> # to do with the FancyIndexing customization directives above.
>> #
>> #AddEncoding x-compress .Z
>> #AddEncoding x-gzip .gz .tgz
>>
>> # If the AddEncoding directives above are commented-out, then you
>> # probably should define those extensions to indicate media types:
>> #
>> AddType application/x-compress .Z
>> AddType application/x-gzip .gz .tgz
>>
>> #
>> # AddHandler allows you to map certain file extensions to "handlers":
>> # actions unrelated to filetype. These can be either built into the server
>> # or added with the Action directive (see below)
>> #
>> # To use CGI scripts outside of ScriptAliased directories:
>> # (You will also need to add "ExecCGI" to the "Options" directive.)
>> #
>> #AddHandler cgi-script .cgi
>>
>> #
>> # For files that include their own HTTP headers:
>> #
>> #AddHandler send-as-is asis
>>
>> #
>> # For type maps (negotiated resources):
>> # (This is enabled by default to allow the Apache "It Worked" page
>> # to be distributed in multiple languages.)
>> #
>> AddHandler type-map var
>>
>> #
>> # Filters allow you to process content before it is sent to the client.
>> #
>> # To parse .shtml files for server-side includes (SSI):
>> # (You will also need to add "Includes" to the "Options" directive.)
>> #
>> AddType text/html .shtml
>> AddOutputFilter INCLUDES .shtml
>>
>> #
>> # Action lets you define media types that will execute a script whenever
>> # a matching file is called. This eliminates the need for repeated URL
>> # pathnames for oft-used CGI file processors.
>> # Format: Action media/type /cgi-script/location
>> # Format: Action handler-name /cgi-script/location
>> #
>>
>> #
>> # Customizable error responses come in three flavors:
>> # 1) plain text 2) local redirects 3) external redirects
>> #
>> # Some examples:
>> #ErrorDocument 500 "The server made a boo boo."
>> #ErrorDocument 404 /missing.html
>> #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
>> #ErrorDocument 402 http://www.example.com/subscription_info.html
>> #
>>
>> #
>> # Putting this all together, we can internationalize error responses.
>> #
>> # We use Alias to redirect any /error/HTTP_<error>.html.var response to
>> # our collection of by-error message multi-language collections. We use
>> # includes to substitute the appropriate text.
>> #
>> # You can modify the messages' appearance without changing any of the
>> # default HTTP_<error>.html.var files by adding the line:
>> #
>> # Alias /error/include/ "/your/include/path/"
>> #
>> # which allows you to create your own set of files by starting with the
>> # /var/www/error/include/ files and
>> # copying them to /your/include/path/, even on a per-VirtualHost basis.
>> #
>>
>> Alias /error/ "/var/www/error/"
>>
>> <IfModule mod_negotiation.c>
>> <IfModule mod_include.c>
>> <Directory "/var/www/error">
>> AllowOverride None
>> Options IncludesNoExec
>> AddOutputFilter Includes html
>> AddHandler type-map var
>> Order allow,deny
>> Allow from all
>> LanguagePriority en es de fr
>> ForceLanguagePriority Prefer Fallback
>> </Directory>
>>
>> # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
>> # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
>> # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
>> # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
>> # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
>> # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
>> # ErrorDocument 410 /error/HTTP_GONE.html.var
>> # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
>> # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
>> # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
>> # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
>> # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
>> # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
>> # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
>> # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
>> # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
>> # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var
>>
>> </IfModule>
>> </IfModule>
>>
>> #
>> # The following directives modify normal HTTP response behavior to
>> # handle known problems with browser implementations.
>> #
>> BrowserMatch "Mozilla/2" nokeepalive
>> BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
>> BrowserMatch "RealPlayer 4\.0" force-response-1.0
>> BrowserMatch "Java/1\.0" force-response-1.0
>> BrowserMatch "JDK/1\.0" force-response-1.0
>>
>> #
>> # The following directive disables redirects on non-GET requests for
>> # a directory that does not include the trailing slash. This fixes a
>> # problem with Microsoft WebFolders which does not appropriately handle
>> # redirects for folders with DAV methods.
>> # Same deal with Apple's DAV filesystem and Gnome VFS support for DAV.
>> #
>> BrowserMatch "Microsoft Data Access Internet Publishing Provider"
>> redirect-carefully
>> BrowserMatch "MS FrontPage" redirect-carefully
>> BrowserMatch "^WebDrive" redirect-carefully
>> BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully
>> BrowserMatch "^gnome-vfs/1.0" redirect-carefully
>> BrowserMatch "^XML Spy" redirect-carefully
>> BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully
>>
>> #
>> # Allow server status reports generated by mod_status,
>> # with the URL of http://servername/server-status
>> # Change the ".example.com" to match your domain to enable.
>> #
>> #<Location /server-status>
>> # SetHandler server-status
>> # Order deny,allow
>> # Deny from all
>> # Allow from .example.com
>> #</Location>
>>
>> #
>> # Allow remote server configuration reports, with the URL of
>> # http://servername/server-info (requires that mod_info.c be loaded).
>> # Change the ".example.com" to match your domain to enable.
>> #
>> #<Location /server-info>
>> # SetHandler server-info
>> # Order deny,allow
>> # Deny from all
>> # Allow from .example.com
>> #</Location>
>>
>> #
>> # Proxy Server directives. Uncomment the following lines to
>> # enable the proxy server:
>> #
>> #<IfModule mod_proxy.c>
>> #ProxyRequests On
>> #
>> #<Proxy *>
>> # Order deny,allow
>> # Deny from all
>> # Allow from .example.com
>> #</Proxy>
>>
>> #
>> # Enable/disable the handling of HTTP/1.1 "Via:" headers.
>> # ("Full" adds the server version; "Block" removes all outgoing Via:
>> headers)
>> # Set to one of: Off | On | Full | Block
>> #
>> #ProxyVia On
>>
>> #
>> # To enable a cache of proxied content, uncomment the following lines.
>> # See http://httpd.apache.org/docs/2.2/mod/mod_cache.html for more
>> details.
>> #
>> #<IfModule mod_disk_cache.c>
>> # CacheEnable disk /
>> # CacheRoot "/var/cache/mod_proxy"
>> #</IfModule>
>> #
>>
>> #</IfModule>
>> # End of proxy directives.
>>
>> ### Section 3: Virtual Hosts
>> #
>> # VirtualHost: If you want to maintain multiple domains/hostnames on your
>> # machine you can setup VirtualHost containers for them. Most
>> configurations
>> # use only name-based virtual hosts so the server doesn't need to worry
>> about
>> # IP addresses. This is indicated by the asterisks in the directives
>> below.
>> #
>> # Please see the documentation at
>> # <URL:http://httpd.apache.org/docs/2.2/vhosts/>
>> # for further details before you try to setup virtual hosts.
>> #
>> # You may use the command line option '-S' to verify your virtual host
>> # configuration.
>>
>> #
>> # Use name-based virtual hosting.
>> #
>> #NameVirtualHost *:80
>> #
>> # NOTE: NameVirtualHost cannot be used without a port specifier
>> # (e.g. :80) if mod_ssl is being used, due to the nature of the
>> # SSL protocol.
>> #
>>
>> #
>> # VirtualHost example:
>> # Almost any Apache directive may go into a VirtualHost container.
>> # The first VirtualHost section is used for requests without a known
>> # server name.
>> #
>> #<VirtualHost *:80>
>> # ServerAdmin webmaster em dummy-host.example.com
>> # DocumentRoot /www/docs/dummy-host.example.com
>> # ServerName dummy-host.example.com
>> # ErrorLog logs/dummy-host.example.com-error_log
>> # CustomLog logs/dummy-host.example.com-access_log common
>> #</VirtualHost>
>>
>> --
>> Fedora-users-br mailing list
>> Fedora-users-br em redhat.com
>> https://www.redhat.com/mailman/listinfo/fedora-users-br
>
>
>
> --
> Gabriel Z. Lovison
>
> --
> Fedora-users-br mailing list
> Fedora-users-br em redhat.com
> https://www.redhat.com/mailman/listinfo/fedora-users-br
>
>
Mais detalhes sobre a lista de discussão Fedora-users-br