[Fedora-users-br] Modem 3G ZTE MF 636 (Brasiltelecom)
Isamar Maia
isamar em gmail.com
Sáb Mar 28 02:13:35 UTC 2009
Seu modem eh este daqui:
> usb 2-2: New USB device found, idVendor=19d2, idProduct=2000
> usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
> usb 2-2: Product: ZTE CDMA Technologies MSM
> usb 2-2: Manufacturer: ZTE,Incorporated
> usb 2-2: SerialNumber: 1234567890ABCDEF
Teste abri-lo com o wvdial ou gnome-ppp atraves da porta /dev/ttyUSB4
Se nao funcionar, tente abri-lo com o "minicom" na mesma porta e rode
o comando padrao "HAYES":
AT+ZCDRUN=8 <ENTER>
Caso nao consiga abri-lo via "minicom" , abra-o usando Hyperterminal
numa maquina Windows e dispare o comando acima.
Em seguida, crie um regra de HAL para ele ser carregado automagicamente.
Coloque o conteudo abaixo em um novo arquivo de nome
/etc/udev/rules.d/90-zte.rules
ACTION!="add", GOTO="ZTE_End"
#
SUBSYSTEM=="usb", SYSFS{idProduct}=="0031",
SYSFS{idVendor}=="19d2", GOTO="ZTE_Modem"
#
LABEL="ZTE_Modem"
RUN+="/sbin/modprobe usbserial vendor=0x19d2 product=0x0031",
MODE="660", GROUP="dialout"
#
LABEL="ZTE_End"
Veja o posting do "GeorgeVita" em
http://ubuntuforums.org/archive/index.php/t-1065934.html
Isamar
2009/3/27 André Maurício <ammvaz em gmail.com>:
> Caro Isamar, segue abaixo:
>
> Saida do lsusb
>
> Bus 002 Device 003: ID 19d2:2000 ONDA Communication S.p.A.
> Bus 002 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 006 Device 002: ID 04f3:0210 Elan Microelectronics Corp. AM-400
> Hama Optical Mouse
> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 001 Device 002: ID 0bda:8189 Realtek Semiconductor Corp. RTL8187B
> Wireless 802.11g 54Mbps Network Adapter
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>
> saida do dmesg:
>
> Initializing cgroup subsys cpuset
> Initializing cgroup subsys cpu
> Linux version 2.6.27.19-170.2.35.fc10.x86_64
> (mockbuild em xenbuilder2.fedora.redhat.com) (gcc version 4.3.2 20081105
> (Red Hat 4.3.2-7) (GCC) ) #1 SMP Mon Feb 23 13:00:23 EST 2009
> Command line: ro root=UUID=e308f504-77cc-4600-b01d-bccc02c28262 rhgb
> quiet vga=791
> KERNEL supported cpus:
> Intel GenuineIntel
> AMD AuthenticAMD
> Centaur CentaurHauls
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f6d0000 (usable)
> BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI NVS)
> BIOS-e820: 000000007f6df000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
> DMI present.
> last_pfn = 0x7f6d0 max_arch_pfn = 0x3ffffffff
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> init_memory_mapping
> 0000000000 - 007f600000 page 2M
> 007f600000 - 007f6d0000 page 4k
> kernel direct mapping tables up to 7f6d0000 @ 8000-c000
> last_map_addr: 7f6d0000 end: 7f6d0000
> RAMDISK: 37c75000 - 37fefbbf
> ACPI: RSDP 000F79D0, 0024 (r2 PTLTD )
> ACPI: XSDT 7F6D41B9, 008C (r1 ITINFO 6040000 LTP 0)
> ACPI: FACP 7F6DBD48, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
> ACPI: DSDT 7F6D577B, 6559 (r2 INTEL CRESTLNE 6040000 INTL 20050624)
> ACPI: FACS 7F6DEFC0, 0040
> ACPI: APIC 7F6DBE3C, 0068 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
> ACPI: HPET 7F6DBEA4, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
> ACPI: MCFG 7F6DBEDC, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
> ACPI: TCPA 7F6DBF18, 0032 (r1 Intel CRESTLN 6040000 5A52)
> ACPI: TMOR 7F6DBF4A, 0026 (r1 PTLTD 6040000 PTL 3)
> ACPI: APIC 7F6DBF70, 0068 (r1 PTLTD APIC 6040000 LTP
> 0)
> ACPI: BOOT 7F6DBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
> ACPI: SSDT 7F6D54CE, 02AD (r1 SataRe SataAhci 1000 INTL 20050624)
> ACPI: SSDT 7F6D5455, 0079 (r1 BrtRef DD01BRT 1000 INTL 20050624)
> ACPI: SSDT 7F6D47D1, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
> ACPI: SSDT 7F6D472B, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
> ACPI: SSDT 7F6D4245, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
> ACPI: BIOS bug: multiple APIC/MADT found, using 0
> ACPI: If "acpi_apic_instance=2" works better, notify
> linux-acpi em vger.kernel.org
> No NUMA configuration found
> Faking a node at 0000000000000000-000000007f6d0000
> Bootmem setup node 0 0000000000000000-000000007f6d0000
> NODE_DATA [000000000000a000 - 000000000001efff]
> bootmap [000000000001f000 - 000000000002eedf] pages 10
> (6 early reservations) ==> bootmem [0000000000 - 007f6d0000]
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
> 0000001000]
> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
> 0000008000]
> #2 [0000200000 - 0000a2f0cc] TEXT DATA BSS ==> [0000200000 -
> 0000a2f0cc]
> #3 [0037c75000 - 0037fefbbf] RAMDISK ==> [0037c75000 -
> 0037fefbbf]
> #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 -
> 0000100000]
> #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 -
> 000000a000]
> found SMP MP-table at [ffff8800000f7a50] 000f7a50
> [ffffe20000000000-ffffe20001bfffff] PMD ->
> [ffff880001200000-ffff880002dfffff] on node 0
> Zone PFN ranges:
> DMA 0x00000000 -> 0x00001000
> DMA32 0x00001000 -> 0x00100000
> Normal 0x00100000 -> 0x00100000
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
> 0: 0x00000000 -> 0x0000009f
> 0: 0x00000100 -> 0x0007f6d0
> On node 0 totalpages: 521839
> DMA zone: 1745 pages, LIFO batch:0
> DMA32 zone: 510760 pages, LIFO batch:31
> ACPI: PM-Timer IO Port: 0x1008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> ACPI: HPET id: 0x8086a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> SMP: Allowing 2 CPUs, 0 hotplug CPUs
> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
> PERCPU: Allocating 65184 bytes of per cpu data
> NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
> Built 1 zonelists in Node order, mobility grouping on. Total pages:
> 512505
> Policy zone: DMA32
> Kernel command line: ro root=UUID=e308f504-77cc-4600-b01d-bccc02c28262
> rhgb quiet vga=791
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 32768 bytes)
> Extended CMOS year: 2000
> TSC: PIT calibration confirmed by PMTIMER.
> TSC: using PMTIMER calibration value
> Detected 1861.989 MHz processor.
> Console: colour dummy device 80x25
> console [tty0] enabled
> Checking aperture...
> No AGP bridge found
> Calgary: detecting Calgary via BIOS EBDA area
> Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> Memory: 2046372k/2087744k available (3307k kernel code, 40984k
> reserved, 1840k data, 1296k init)
> CPA: page pool initialized 1 of 1 pages preallocated
> SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2,
> Nodes=1
> hpet clockevent registered
> Calibrating delay loop (skipped), value calculated using timer
> frequency.. 3723.97 BogoMIPS (lpj=1861989)
> Security Framework initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Mount-cache hash table entries: 256
> Initializing cgroup subsys ns
> Initializing cgroup subsys cpuacct
> Initializing cgroup subsys devices
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 1024K
> CPU 0/0 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> CPU0: Thermal monitoring enabled (TM2)
> using mwait in idle threads.
> ACPI: Core revision 20080609
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> CPU0: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
> Using local APIC timer interrupts.
> APIC timer calibration result 8312466
> Detected 8.312 MHz APIC timer.
> Booting processor 1/1 ip 6000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3723.91 BogoMIPS
> (lpj=1861955)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 1024K
> CPU 1/1 -> Node 0
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> CPU1: Thermal monitoring enabled (TM2)
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz stepping 0d
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> Total of 2 processors activated (7447.88 BogoMIPS).
> sizeof(vma)=176 bytes
> sizeof(page)=56 bytes
> sizeof(inode)=560 bytes
> sizeof(dentry)=208 bytes
> sizeof(ext3inode)=760 bytes
> sizeof(buffer_head)=104 bytes
> sizeof(skbuff)=232 bytes
> sizeof(task_struct)=5904 bytes
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 0 1
> domain 1: span 0-1 level NODE
> groups: 0-1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 1 0
> domain 1: span 0-1 level NODE
> groups: 0-1
> net_namespace: 1552 bytes
> Booting paravirtualized kernel on bare hardware
> Time: 17:24:02 Date: 03/27/09
> NET: Registered protocol family 16
> No dock devices found.
> ACPI: bus type pci registered
> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> PCI: MCFG area at e0000000 reserved in E820
> PCI: Using MMCONFIG at e0000000 - efffffff
> PCI: Using configuration type 1 for base access
> ACPI: EC: Look up EC in DSDT
> ACPI: BIOS _OSI(Linux) query ignored
> ACPI: If "acpi_osi=Linux" works better, please notify
> linux-acpi em vger.kernel.org
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: EC: GPE = 0x1a, I/O: command/status = 0x66, data = 0x62
> ACPI: EC: driver started in poll mode
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: 0000:00:02.0 reg 10 64bit mmio: [f4000000, f40fffff]
> PCI: 0000:00:02.0 reg 18 64bit mmio: [d0000000, dfffffff]
> PCI: 0000:00:02.0 reg 20 io port: [1800, 1807]
> PCI: 0000:00:02.1 reg 10 64bit mmio: [f4100000, f41fffff]
> PCI: 0000:00:1a.0 reg 20 io port: [1820, 183f]
> PCI: 0000:00:1a.1 reg 20 io port: [1840, 185f]
> PCI: 0000:00:1a.7 reg 10 32bit mmio: [f4504800, f4504bff]
> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1a.7: PME# disabled
> PCI: 0000:00:1b.0 reg 10 64bit mmio: [f4500000, f4503fff]
> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1b.0: PME# disabled
> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.0: PME# disabled
> pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
> pci 0000:00:1c.5: PME# disabled
> PCI: 0000:00:1d.0 reg 20 io port: [1860, 187f]
> PCI: 0000:00:1d.1 reg 20 io port: [1880, 189f]
> PCI: 0000:00:1d.2 reg 20 io port: [18a0, 18bf]
> PCI: 0000:00:1d.7 reg 10 32bit mmio: [f4504c00, f4504fff]
> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> pci 0000:00:1d.7: PME# disabled
> pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6
> ACPI/GPIO/TCO
> pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
> PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
> PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
> PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
> PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
> PCI: 0000:00:1f.1 reg 20 io port: [1810, 181f]
> PCI: 0000:00:1f.2 reg 10 io port: [1c00, 1c07]
> PCI: 0000:00:1f.2 reg 14 io port: [18d4, 18d7]
> PCI: 0000:00:1f.2 reg 18 io port: [18d8, 18df]
> PCI: 0000:00:1f.2 reg 1c io port: [18d0, 18d3]
> PCI: 0000:00:1f.2 reg 20 io port: [18e0, 18ff]
> PCI: 0000:00:1f.2 reg 24 32bit mmio: [f4504000, f45047ff]
> pci 0000:00:1f.2: PME# supported from D3hot
> pci 0000:00:1f.2: PME# disabled
> PCI: 0000:00:1f.3 reg 10 32bit mmio: [0, ff]
> PCI: 0000:00:1f.3 reg 20 io port: [1c20, 1c3f]
> PCI: bridge 0000:00:1c.0 io port: [2000, 2fff]
> PCI: bridge 0000:00:1c.0 32bit mmio: [f2000000, f3ffffff]
> PCI: bridge 0000:00:1c.0 64bit mmio pref: [f0000000, f1ffffff]
> PCI: 0000:04:00.0 reg 10 64bit mmio: [f4200000, f4203fff]
> PCI: 0000:04:00.0 reg 18 io port: [3000, 30ff]
> PCI: 0000:04:00.0 reg 30 32bit mmio: [0, 1ffff]
> pci 0000:04:00.0: supports D1
> pci 0000:04:00.0: supports D2
> pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> pci 0000:04:00.0: PME# disabled
> PCI: bridge 0000:00:1c.5 io port: [3000, 3fff]
> PCI: bridge 0000:00:1c.5 32bit mmio: [f4200000, f42fffff]
> pci 0000:00:1e.0: transparent bridge
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> ACPI Error (uteval-0243): No object was returned from
> [\_SB_.PCI0.PCIB._PRT] (Node ffff88007f34c360), AE_NOT_EXIST
> ACPI Exception (pci_irq-0290): AE_NOT_EXIST, Evaluating _PRT
> [AE_NOT_EXIST] [20080609]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
> ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
> ACPI: Power Resource [FN00] (off)
> ACPI: Power Resource [FN01] (off)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp: PnP ACPI: found 10 devices
> ACPI: ACPI bus type pnp unregistered
> SCSI subsystem initialized
> libata version 3.00 loaded.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> PCI-GART: No AMD northbridge found.
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> hpet0: 3 64-bit timers, 14318180 Hz
> tracer: 1286 pages allocated for 65536 entries of 80 bytes
> actual entries 65586
> ACPI: RTC can wake from S4
> system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
> system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
> system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
> system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
> system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
> system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
> system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
> system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
> system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
> system 00:06: ioport range 0x680-0x69f has been reserved
> system 00:06: ioport range 0x800-0x80f has been reserved
> system 00:06: ioport range 0x1000-0x107f has been reserved
> system 00:06: ioport range 0x1180-0x11bf has been reserved
> system 00:06: ioport range 0x1640-0x164f has been reserved
> system 00:06: ioport range 0xfe00-0xfe00 has been reserved
> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
> pci 0000:00:1c.0: IO window: 0x2000-0x2fff
> pci 0000:00:1c.0: MEM window: 0xf2000000-0xf3ffffff
> pci 0000:00:1c.0: PREFETCH window: 0x000000f0000000-0x000000f1ffffff
> pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04
> pci 0000:00:1c.5: IO window: 0x3000-0x3fff
> pci 0000:00:1c.5: MEM window: 0xf4200000-0xf42fffff
> pci 0000:00:1c.5: PREFETCH window: 0x00000088000000-0x000000880fffff
> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
> pci 0000:00:1e.0: IO window: disabled
> pci 0000:00:1e.0: MEM window: disabled
> pci 0000:00:1e.0: PREFETCH window: disabled
> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> pci 0000:00:1c.0: setting latency timer to 64
> pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:1c.5: setting latency timer to 64
> pci 0000:00:1e.0: setting latency timer to 64
> bus: 00 index 0 io port: [0, ffff]
> bus: 00 index 1 mmio: [0, ffffffffffffffff]
> bus: 02 index 0 io port: [2000, 2fff]
> bus: 02 index 1 mmio: [f2000000, f3ffffff]
> bus: 02 index 2 mmio: [f0000000, f1ffffff]
> bus: 02 index 3 mmio: [0, 0]
> bus: 04 index 0 io port: [3000, 3fff]
> bus: 04 index 1 mmio: [f4200000, f42fffff]
> bus: 04 index 2 mmio: [88000000, 880fffff]
> bus: 04 index 3 mmio: [0, 0]
> bus: 05 index 0 mmio: [0, 0]
> bus: 05 index 1 mmio: [0, 0]
> bus: 05 index 2 mmio: [0, 0]
> bus: 05 index 3 io port: [0, ffff]
> bus: 05 index 4 mmio: [0, ffffffffffffffff]
> NET: Registered protocol family 2
> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> NET: Registered protocol family 1
> checking if image is initramfs...<7>Switched to high resolution mode
> on CPU 1
> Switched to high resolution mode on CPU 0
> it is
> Freeing initrd memory: 3562k freed
> Simple Boot Flag at 0x36 set to 0x80
> audit: initializing netlink socket (disabled)
> type=2000 audit(1238174642.893:1): initialized
> HugeTLB registered 2 MB page size, pre-allocated 0 pages
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> msgmni has been set to 4003
> SELinux: Registering netfilter hooks
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci 0000:00:02.0: Boot video device
> pcieport-driver 0000:00:1c.0: setting latency timer to 64
> pcieport-driver 0000:00:1c.0: found MSI capability
> pci_express 0000:00:1c.0:pcie00: allocate port service
> pci_express 0000:00:1c.0:pcie02: allocate port service
> pci_express 0000:00:1c.0:pcie03: allocate port service
> pcieport-driver 0000:00:1c.5: setting latency timer to 64
> pcieport-driver 0000:00:1c.5: found MSI capability
> pci_express 0000:00:1c.5:pcie00: allocate port service
> pci_express 0000:00:1c.5:pcie02: allocate port service
> pci_express 0000:00:1c.5:pcie03: allocate port service
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> acpiphp_glue: can't get bus number, assuming 0
> vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010980000, using
> 3072k, total 7616k
> vesafb: mode is 1024x768x16, linelength=2048, pages=3
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour frame buffer device 128x48
> fb0: VESA VGA frame buffer device
> input: Power Button (FF) as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
> ACPI: Power Button (FF) [PWRF]
> input: Lid Switch as
> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
> ACPI: Lid Switch [LID]
> input: Power Button (CM) as
> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
> ACPI: Power Button (CM) [PWRB]
> input: Sleep Button (CM) as
> /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
> ACPI: Sleep Button (CM) [SLPB]
> ACPI: Transitioning device [FAN0] to D3
> fan PNP0C0B:00: registered as cooling_device0
> ACPI: Fan [FAN0] (off)
> ACPI: Transitioning device [FAN1] to D3
> fan PNP0C0B:01: registered as cooling_device1
> ACPI: Fan [FAN1] (off)
> ACPI: SSDT 7F6D5113, 027A (r1 PmRef Cpu0Ist 3000 INTL 20050624)
> ACPI: SSDT 7F6D4A30, 065E (r1 PmRef Cpu0Cst 3001 INTL 20050624)
> Monitor-Mwait will be used to enter C-1 state
> Monitor-Mwait will be used to enter C-2 state
> Monitor-Mwait will be used to enter C-3 state
> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> processor ACPI0007:00: registered as cooling_device2
> ACPI: Processor [CPU0] (supports 8 throttling states)
> ACPI: SSDT 7F6D538D, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
> ACPI: SSDT 7F6D508E, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
> ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> processor ACPI0007:01: registered as cooling_device3
> ACPI: Processor [CPU1] (supports 8 throttling states)
> thermal LNXTHERM:01: registered as thermal_zone0
> ACPI: Thermal Zone [TZ00] (31 C)
> thermal LNXTHERM:02: registered as thermal_zone1
> ACPI: Thermal Zone [TZ01] (27 C)
> hpet_resources: 0xfed00000 is busy
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.103
> agpgart-intel 0000:00:00.0: Intel 965GM Chipset
> agpgart-intel 0000:00:00.0: detected 7676K stolen memory
> agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
> Serial: 8250/16550 driver4 ports, IRQ sharing enabled
> brd: module loaded
> loop: module loaded
> input: Macintosh mouse button emulation as
> /devices/virtual/input/input4
> Driver 'sd' needs updating - please use bus_type methods
> Driver 'sr' needs updating - please use bus_type methods
> ahci 0000:00:1f.2: version 3.0
> ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl
> SATA mode
> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
> ahci 0000:00:1f.2: setting latency timer to 64
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed
> irq 19
> ata2: SATA max UDMA/133 abar m2048 em 0xf4504000 port 0xf4504180 irq 19
> ata3: SATA max UDMA/133 abar m2048 em 0xf4504000 port 0xf4504200 irq 19
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: _GTF unexpected object type 0x1
> ata1.00: ATA-8: SAMSUNG HM251JI, 2SS00_01, max UDMA7
> ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata1.00: _GTF unexpected object type 0x1
> ata1.00: configured for UDMA/133
> ata2: SATA link down (SStatus 0 SControl 300)
> ata3: SATA link down (SStatus 0 SControl 300)
> scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM251JI 2SS0 PQ: 0
> ANSI: 5
> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
> sd 0:0:0:0: [sda] Attached SCSI disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> ata_piix 0000:00:1f.1: version 2.12
> ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
> ata_piix 0000:00:1f.1: setting latency timer to 64
> scsi3 : ata_piix
> scsi4 : ata_piix
> ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
> ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
> ata4.00: ATAPI: Optiarc DVD RW AD-7530B, NX09, max UDMA/33
> ata4.00: configured for UDMA/33
> isa bounce pool size: 16 pages
> scsi 3:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NX09 PQ: 0
> ANSI: 5
> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 3:0:0:0: Attached scsi CD-ROM sr0
> sr 3:0:0:0: Attached scsi generic sg1 type 5
> ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> ehci_hcd 0000:00:1a.7: setting latency timer to 64
> ehci_hcd 0000:00:1a.7: EHCI Host Controller
> ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:1a.7: debug port 1
> ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
> ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4504800
> ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 4 ports detected
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 ehci_hcd
> usb usb1: SerialNumber: 0000:00:1a.7
> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> ehci_hcd 0000:00:1d.7: setting latency timer to 64
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> ehci_hcd 0000:00:1d.7: debug port 1
> ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4504c00
> usb 1-1: new high speed USB device using ehci_hcd and address 2
> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 6 ports detected
> usb 1-1: configuration #1 chosen from 1 choice
> usb 1-1: New USB device found, idVendor=0bda, idProduct=8189
> usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 1-1: Product: RTL8187B_WLAN_Adapter
> usb 1-1: Manufacturer: Manufacturer_Realtek
> usb 1-1: SerialNumber: 00e04c000001
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: EHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 ehci_hcd
> usb usb2: SerialNumber: 0000:00:1d.7
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> USB Universal Host Controller Interface driver v3.0
> uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> uhci_hcd 0000:00:1a.0: setting latency timer to 64
> uhci_hcd 0000:00:1a.0: UHCI Host Controller
> uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> usb 2-3: new high speed USB device using ehci_hcd and address 2
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: UHCI Host Controller
> usb usb3: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
> usb usb3: SerialNumber: 0000:00:1a.0
> uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> uhci_hcd 0000:00:1a.1: setting latency timer to 64
> uhci_hcd 0000:00:1a.1: UHCI Host Controller
> uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> usb 2-3: configuration #1 chosen from 1 choice
> usb 2-3: New USB device found, idVendor=0bda, idProduct=0158
> usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 2-3: Product: USB2.0-CRW
> usb 2-3: Manufacturer: Generic
> usb 2-3: SerialNumber: 20060413092100000
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: UHCI Host Controller
> usb usb4: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
> usb usb4: SerialNumber: 0000:00:1a.1
> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> uhci_hcd 0000:00:1d.0: setting latency timer to 64
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: UHCI Host Controller
> usb usb5: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
> usb usb5: SerialNumber: 0000:00:1d.0
> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> uhci_hcd 0000:00:1d.1: setting latency timer to 64
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
> uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
> usb usb6: configuration #1 chosen from 1 choice
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 2 ports detected
> usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb6: Product: UHCI Host Controller
> usb usb6: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
> usb usb6: SerialNumber: 0000:00:1d.1
> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> uhci_hcd 0000:00:1d.2: setting latency timer to 64
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
> uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
> usb usb7: configuration #1 chosen from 1 choice
> hub 7-0:1.0: USB hub found
> hub 7-0:1.0: 2 ports detected
> usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb7: Product: UHCI Host Controller
> usb usb7: Manufacturer: Linux 2.6.27.19-170.2.35.fc10.x86_64 uhci_hcd
> usb usb7: SerialNumber: 0000:00:1d.2
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> i8042.c: Detected active multiplexing controller, rev 1.1.
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX0 port at 0x60,0x64 irq 12
> serio: i8042 AUX1 port at 0x60,0x64 irq 12
> serio: i8042 AUX2 port at 0x60,0x64 irq 12
> serio: i8042 AUX3 port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input5
> rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one month, y3k, hpet irqs
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
> dm-devel em redhat.com
> cpuidle: using governor ladder
> cpuidle: using governor menu
> Marking TSC unstable due to TSC halts in idle
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> usbhid: v2.6:USB HID core driver
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
> nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module
> option or
> sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
> ip_tables: (C) 2000-2006 Netfilter Core Team
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 17
> registered taskstats version 1
> Magic number: 1:189:442
> Freeing unused kernel memory: 1296k freed
> Write protecting the kernel read-only data: 4752k
> input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6
> input: AlpsPS/2 ALPS GlidePoint as
> /devices/platform/i8042/serio4/input/input7
> SGI XFS with ACLs, security attributes, large block/inode numbers, no
> debug enabled
> SGI XFS Quota Management subsystem
> Clocksource tsc unstable (delta = -138901743 ns)
> XFS mounting filesystem sda3
> Ending clean XFS mount for filesystem: sda3
> SELinux: 8192 avtab hash slots, 112805 rules.
> SELinux: 8192 avtab hash slots, 112805 rules.
> SELinux: 8 users, 11 roles, 2589 types, 121 bools, 1 sens, 1024 cats
> SELinux: 73 classes, 112805 rules
> SELinux: Completing initialization.
> SELinux: Setting up existing superblocks.
> SELinux: initialized (dev sda3, type xfs), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses
> genfs_contexts
> SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses
> genfs_contexts
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev inotifyfs, type inotifyfs), uses
> genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses
> genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> type=1403 audit(1238174648.220:2): policy loaded auid=4294967295
> ses=4294967295
> udevd version 127 started
> usbcore: registered new interface driver usbserial
> usbserial: USB Serial support registered for generic
> usbcore: registered new interface driver usbserial_generic
> usbserial: USB Serial Driver core
> ACPI: AC Adapter [ACAD] (off-line)
> ACPI: Battery Slot [BAT0] (battery present)
> sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> sky2 0000:04:00.0: setting latency timer to 64
> sky2 0000:04:00.0: v1.22 addr 0xf4200000 irq 17 Yukon-2 EC Ultra rev 3
> sky2 eth0: addr 00:14:0b:4d:d4:ae
> acpi device:05: registered as cooling_device4
> input: Video Bus as
> /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/input/input8
> ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> hda_codec: Unknown model for ALC268, trying auto-probe from BIOS...
> ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=1
> (0x14/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0
> (0x0/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1
> (0x15/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
> ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x0,
> line=0x0, fline=0x0, cd=0x0, aux=0x0
> iTCO_vendor_support: vendor-support=0
> iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
> iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
> iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> Initializing USB Mass Storage driver...
> i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
> ACPI: I/O resource 0000:00:1f.3 [0x1c20-0x1c3f] conflicts with ACPI
> region SMBI [0x1c20-0x1c2f]
> ACPI: Device needs an ACPI driver
> input: PC Speaker as /devices/platform/pcspkr/input/input9
> rtl8187: 8187B chip detected. Support is EXPERIMENTAL, and could
> damage your
> hardware, use at your own risk
> phy0: Selected rate control algorithm 'pid'
> phy0: hwaddr 00:22:43:27:b8:4c, RTL8187BvE V0 + rtl8225z2
> usbcore: registered new interface driver rtl8187
> scsi5 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> device-mapper: multipath: version 1.0.5 loaded
> XFS mounting filesystem sda6
> Ending clean XFS mount for filesystem: sda6
> SELinux: initialized (dev sda6, type xfs), uses xattr
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda2, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev sda2, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> usb-storage: device scan complete
> scsi 5:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0
> ANSI: 0 CCS
> sd 5:0:0:0: [sdb] Attached SCSI removable disk
> sd 5:0:0:0: Attached scsi generic sg2 type 0
> Adding 2048248k swap on /dev/sda5. Priority:-1 extents:1
> across:2048248k
> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
> genfs_contexts
> IA-32 Microcode Update Driver: v1.14a <tigran em aivazian.fsnet.co.uk>
> firmware: requesting intel-ucode/06-0f-0d
> firmware: requesting intel-ucode/06-0f-0d
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ip6_tables: (C) 2000-2006 Netfilter Core Team
> RPC: Registered udp transport module.
> RPC: Registered tcp transport module.
> SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses
> genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
> Bluetooth: Core ver 2.13
> NET: Registered protocol family 31
> Bluetooth: HCI device and connection manager initialized
> Bluetooth: HCI socket layer initialized
> Bluetooth: L2CAP ver 2.11
> Bluetooth: L2CAP socket layer initialized
> Bluetooth: SCO (Voice Link) ver 0.6
> Bluetooth: SCO socket layer initialized
> Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> Bluetooth: BNEP filters: protocol multicast
> Bridge firewalling registered
> sky2 eth0: enabling interface
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> ADDRCONF(NETDEV_UP): wlan0: link is not ready
> virbr0: starting userspace STP failed, starting kernel STP
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> Not cloning cgroup for unused subsystem ns
> usbcore: deregistering interface driver usb-storage
> usbcore: deregistering interface driver usbserial_generic
> usbserial: USB Serial deregistering driver generic
> usbcore: deregistering interface driver usbserial
> usbcore: registered new interface driver usbserial
> usbserial: USB Serial support registered for generic
> usbcore: registered new interface driver usbserial_generic
> usbserial: USB Serial Driver core
> usbserial: USB Serial support registered for GSM modem (1-port)
> usbcore: registered new interface driver option
> option: USB Driver for GSM modems: v0.7.2
> Initializing USB Mass Storage driver...
> scsi6 : SCSI emulation for USB Mass Storage devices
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
> [drm] Initialized drm 1.1.0 20060810
> pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> pci 0000:00:02.0: setting latency timer to 64
> [drm] Initialized i915 1.6.0 20080730 on minor 0
> usb-storage: device scan complete
> virbr0: no IPv6 routers present
> usb 2-3: reset high speed USB device using ehci_hcd and address 2
> scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0
> ANSI: 0 CCS
> sd 6:0:0:0: [sdb] Attached SCSI removable disk
> sd 6:0:0:0: Attached scsi generic sg2 type 0
> CPU0 attaching NULL sched-domain.
> CPU1 attaching NULL sched-domain.
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 0 1
> domain 1: span 0-1 level CPU
> groups: 0-1
> domain 2: span 0-1 level NODE
> groups: 0-1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 1 0
> domain 1: span 0-1 level CPU
> groups: 0-1
> domain 2: span 0-1 level NODE
> groups: 0-1
> fuse init (API version 7.9)
> SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
> CPU0 attaching NULL sched-domain.
> CPU1 attaching NULL sched-domain.
> CPU0 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 0 1
> domain 1: span 0-1 level CPU
> groups: 0-1
> domain 2: span 0-1 level NODE
> groups: 0-1
> CPU1 attaching sched-domain:
> domain 0: span 0-1 level MC
> groups: 1 0
> domain 1: span 0-1 level CPU
> groups: 0-1
> domain 2: span 0-1 level NODE
> groups: 0-1
> usb 2-2: new high speed USB device using ehci_hcd and address 3
> usb 2-2: configuration #1 chosen from 1 choice
> usb-storage: device ignored
> usb 2-2: New USB device found, idVendor=19d2, idProduct=2000
> usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=4
> usb 2-2: Product: ZTE CDMA Technologies MSM
> usb 2-2: Manufacturer: ZTE,Incorporated
> usb 2-2: SerialNumber: 1234567890ABCDEF
> usb 6-2: new low speed USB device using uhci_hcd and address 2
> usb 6-2: configuration #1 chosen from 1 choice
> input: PS/2+USB Mouse as
> /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input10
> input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.1-2
> usb 6-2: New USB device found, idVendor=04f3, idProduct=0210
> usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> usb 6-2: Product: PS/2+USB Mouse
>
>
>
> 2009/3/27 Isamar Maia <isamar em gmail.com>:
>> Andre,
>>
>> Ao espetar o modem, envie o que vem como saida no o comando "dmesg"
>> e envie tambem a saida do comando "lsusb"
>>
>>
>> Isamar
>>
>>
>> 2009/3/27 André Maurício <ammvaz em gmail.com>:
>>> Alguém ja conseguiu ja conseguiu rodar a internet 3G com o modem ZTE
>>> MF 636 (Brasiltelecom) no Fedora 10.
>>>
>>> Tenho acompanhado algumas listas e alguns usuários do ubuntu ja
>>> tiveram sucesso. << http://ubuntuforum-br.org/index.php?topic=46918.0
>>>>>
>>>
>>> Segui os passos indicados mas não nem consegui detectar o modem.
>>>
>>> Alguma dica?
>>>
>>> Já falei com a ZTE (China) não tem suporte
>>>
>>> Estou tentando com um usuário de fedora da Austrália. (A ZTE de lá
>>> parece que tem um suporte para linux)
>>>
>>> Abraços
>>>
>>> --
>>> André Maurício
>>>
>>> --
>>> Fedora-users-br mailing list
>>> Fedora-users-br em redhat.com
>>> https://www.redhat.com/mailman/listinfo/fedora-users-br
>>>
>>
>>
>>
>> --
>> Isamar Maia
>> Brazil: 55-71-9146-8575
>> 55-71-8890-7870
>> 日本: +81-(0)3-4550-1212
>> "In a world without walls. Who needs windows and gates?"
>>
>>
>> --
>> Fedora-users-br mailing list
>> Fedora-users-br em redhat.com
>> https://www.redhat.com/mailman/listinfo/fedora-users-br
>>
>>
>
>
>
> --
> André Maurício
> ammvaz em gmail.com
> +55 41 9234 3498
> (o\ | /o)
>
>
> --
> Fedora-users-br mailing list
> Fedora-users-br em redhat.com
> https://www.redhat.com/mailman/listinfo/fedora-users-br
>
>
--
Isamar Maia
Brazil: 55-71-9146-8575
55-71-8890-7870
日本: +81-(0)3-4550-1212
"In a world without walls. Who needs windows and gates?"
Mais detalhes sobre a lista de discussão Fedora-users-br