[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[Fedora-xen] 2.6.15-1.2054_FC5xen0 - no network for guest domains



Hi!

I'm using xenguest-install.py to install a guest domain on x86_64.

The anaconda installer start up fine, but when I configure the network for the guest domain (be it DHCP or static IP), after trying to contact installation FTP server, I discover that the guest domain has no network connectivity at all - it cannot resolve the FTP server's hostname, or connect to it directly by its IP address; I cannot ping from other hosts or from dom0 to the guest domain.

The physical network controller is a Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet using the tg3 driver.

The virtual network devices are created by Xen on domain 0:
# ifconfig
eth0 Link encap:Ethernet HWaddr 00:15:60:0B:ED:88 inet addr:192.168.254.208 Bcast:192.168.254.255 Mask:255.255.255.0
         inet6 addr: fe80::215:60ff:fe0b:ed88/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:475078 errors:0 dropped:0 overruns:0 frame:0
         TX packets:601247 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:1000
         RX bytes:99094177 (94.5 MiB)  TX bytes:322269097 (307.3 MiB)
         Interrupt:17

eth0:0 Link encap:Ethernet HWaddr 00:15:60:0B:ED:88 inet addr:192.168.254.4 Bcast:192.168.254.255 Mask:255.255.255.0
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         Interrupt:17

lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0
         inet6 addr: ::1/128 Scope:Host
         UP LOOPBACK RUNNING  MTU:16436  Metric:1
         RX packets:80137 errors:0 dropped:0 overruns:0 frame:0
         TX packets:80137 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:288852189 (275.4 MiB)  TX bytes:288852189 (275.4 MiB)

vif1.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:99 errors:0 dropped:0 overruns:0 frame:0
         TX packets:0 errors:0 dropped:6 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:4158 (4.0 KiB)  TX bytes:0 (0.0 b)

xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
         UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
         RX packets:99 errors:0 dropped:0 overruns:0 frame:0
         TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
         collisions:0 txqueuelen:0
         RX bytes:2772 (2.7 KiB)  TX bytes:468 (468.0 b)

I suspect that this may have something to do with x86_64 architecture and the tg3 driver. Any ideas?

--
Best Regards,
   Aleksander Adamowski
       GG#: 274614
ICQ UIN: 19780575 http://olo.ab.altkom.pl


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]