[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

[Fedora-xen] 4gb seg fixup messages during boot; xen guest not booting



Hi list,

I have seen this topic written about on a number of sites but none of
the suggested fixed have worked for me.

I have a FC5 box with 1GB RAM and the latest xen-3.0.3-1.fc5 package as
well as kernel-xen0 and kernel-xenU-2.6.18-1.2239.fc5 installed.

I followed the install instructions at
http://www.fedoraproject.org/wiki/FedoraXenQuickstart to install Fedora
Core 4 as a xen guest and have booted into the xen0 kernel. My guest has
256 MB RAM.

Here's the config:

kernel="/boot/vmlinuz-2.6.18-1.2239.fc5xenU"
memory = 256
name = "rawhide"
vif = [ '', 'bridge=xenbr0' ]
disk = ['file:/root/XEN/fedora.img,sda1,w']
root = "/dev/sda1"
extra = "ro selinux=0 3"


When I type "xm create -c rawhide" in a KDE Konsole window, my guest
starts to boot but does not finish. I have tried adding "echo 'hwcap 0
nosegneg' > /etc/ld.so.conf.d/libc6-xen.conf" as one web site suggested.
No luck.

I tried adding vnc=1 and vnclisten="127.0.0.1" to my xen guest config
file but no luck.

I am logged in as root when I run xm. Here is the screen printout when I
boot my VM:

[root localhost ~]# xm create -c rawhide
Using config file "/etc/xen/rawhide".
Started domain rawhide
Linux version 2.6.18-1.2239.fc5xenU
(brewbuilder hs20-bc1-7 build redhat com) (gcc version 4.1.1 20060525
(Red Hat 4.1.1-1)) #1 SMP Fri Nov 10 14:15:41 EST 2006
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Built 1 zonelists.  Total pages: 67584
Kernel command line:  root=/dev/sda1 ro selinux=0 3
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c06dd000 soft=c06bd000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 1196.467 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB disabled
vmalloc area: d1000000-fb3fe000, maxmem 33ffe000
Memory: 255292k/270336k available (1719k kernel code, 6540k reserved,
633k data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
calibrate_delay_direct() failed to get a good estimate for
loops_per_jiffy.
Probably due to long platform interrupts. Consider using "lpj=" boot
option.
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
xen_mem: Initialising balloon driver.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 327680 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1163273992.613:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 481F17AAEB289250
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.18-1.2239.fc5xenU
(brewbuilder hs20-bc1-7 build redhat com) (gcc version 4.1.1 20060525
(Red Hat 4.1.1-1)) #1 SMP Fri Nov 10 14:15:41 EST 2006
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Built 1 zonelists.  Total pages: 67584
Kernel command line:  root=/dev/sda1 ro selinux=0 3
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c06dd000 soft=c06bd000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 1196.467 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB disabled
vmalloc area: d1000000-fb3fe000, maxmem 33ffe000
Memory: 255292k/270336k available (1719k kernel code, 6540k reserved,
633k data, 144k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
calibrate_delay_direct() failed to get a good estimate for
loops_per_jiffy.
Probably due to long platform interrupts. Consider using "lpj=" boot
option.
Security Framework v1.0.0 initialized
SELinux:  Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
xen_mem: Initialising balloon driver.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 327680 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1163273992.613:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 481F17AAEB289250
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with
idebus=xx
Registering block device major 8
ide-floppy driver 0.99.newide
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/vif/1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 144k freed
Write protecting the kernel read-only data: 258k
4gb seg fixup, process init (pid 1), cs:ip 73:007a65e5
4gb seg fixup, process init (pid 1), cs:ip 73:0075184e
4gb seg fixup, process init (pid 1), cs:ip 73:007c199e
4gb seg fixup, process init (pid 1), cs:ip 73:00750554
4gb seg fixup, process init (pid 1), cs:ip 73:00750562
4gb seg fixup, process init (pid 1), cs:ip 73:007a6322
4gb seg fixup, process init (pid 1), cs:ip 73:0074ae9c
4gb seg fixup, process init (pid 1), cs:ip 73:007adeda
4gb seg fixup, process init (pid 1), cs:ip 73:0071527c
4gb seg fixup, process init (pid 1), cs:ip 73:00750554
modprobe: FATAL: Could not load
/lib/modules/2.6.18-1.2239.fc5xenU/modules.dep: No such file or
directory

INIT: version 2.85 booting
/etc/rc.d/rc.sysinit: line 78: /dev/tty1: Read-only file system
/etc/rc.d/rc.sysinit: line 78: /dev/tty2: Read-only file system
/etc/rc.d/rc.sysinit: line 78: /dev/tty3: Read-only file system
/etc/rc.d/rc.sysinit: line 78: /dev/tty4: Read-only file system
/etc/rc.d/rc.sysinit: line 78: /dev/tty5: Read-only file system
/etc/rc.d/rc.sysinit: line 78: /dev/tty6: Read-only file system
/etc/rc.d/rc.sysinit: line 82: /dev/tty7: Read-only file system
/etc/rc.d/rc.sysinit: line 83: /dev/tty8: Read-only file system
                Welcome to Fedora Core
                Press 'I' to enter interactive startup.
Starting udev:[  OK  ]
Initializing hardware...  storage network audio done[  OK  ]
Setting clock : Sat Nov 11 14:40:07 EST 2006 [  OK  ]
Setting hostname localhost:  [  OK  ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
/dev/sda1: clean, 26465/262656 files, 220368/524288 blocks
[  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
Mounting local filesystems:  [  OK  ]
Enabling local filesystem quotas:  [  OK  ]
Enabling swap space:  [  OK  ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Checking for new hardwaremodprobe: FATAL: Could not load
/lib/modules/2.6.18-1.2239.fc5xenU/modules.dep: No such file or
directory

modprobe: FATAL: Could not load
/lib/modules/2.6.18-1.2239.fc5xenU/modules.dep: No such file or
directory

modprobe: FATAL: Could not load
/lib/modules/2.6.18-1.2239.fc5xenU/modules.dep: No such file or
directory

mmap /dev/mem: Bad address
mmap /dev/mem: Bad address
modprobe: FATAL: Could not load
/lib/modules/2.6.18-1.2239.fc5xenU/modules.dep: No such file or
directory

 [  OK  ]
Starting pcmcia:  Starting PCMCIA services: FATAL: Could not load
/lib/modules/2.6.18-1.2239.fc5xenU/modules.dep: No such file or
directory
[FAILED]
Starting system logger: [  OK  ]
Starting kernel logger: [  OK  ]
Networking not configured - exiting
Can't open RFCOMM control socket: Address family not supported by
protocol

Starting automount: printk: 571702 messages suppressed.
4gb seg fixup, process S28autofs (pid 543), cs:ip 73:0074cf6e
[  OK  ]
Starting cups: [  OK  ]
Starting sshd: [  OK  ]
Starting sendmail: [  OK  ]
Starting sm-client: [  OK  ]
Starting console mouse services: [  OK  ]
Starting crond: [  OK  ]
Starting anacron: [  OK  ]
Starting atd: [  OK  ]
Starting system message bus: [  OK  ]
Starting HAL daemon: [  OK  ]
printk: 446257 messages suppressed.
4gb seg fixup, process udevsend (pid 735), cs:ip 73:002eb5e5
printk: 574719 messages suppressed.
4gb seg fixup, process sendmail (pid 646), cs:ip 73:00382554
printk: 15 messages suppressed.

Any suggestions?

Thanks,

Job

[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]