[Freeipa-users] consulting?
Jimmy
g17jimmy at gmail.com
Mon Jan 23 17:52:25 UTC 2012
That's what I was thinking, and what I did, but it still doesn't replicate
new users. This is the command I used:
ipa-replica-manage connect --passsync --binddn
cn=winsync,cn=Users,dc=cspad,dc=pdh,dc=csp --bindpw=******** --cacert
/home/winsync/AD-server-cert.cer 192.168.201.150 -v
On Mon, Jan 23, 2012 at 12:30 PM, Rich Megginson <rmeggins at redhat.com>wrote:
> **
> On 01/23/2012 10:19 AM, Jimmy wrote:
>
> Here's what I found in the DS admin guide. Is this all that's needed to
> create the sync agreement?
>
> Not with ipa - you should use the ipa-replica-manage command instead
>
> Thanks.
>
> add sync agreement:
> ldapmodify -x -D "cn=Directory Manager" -W
> Enter LDAP Password: *******
> dn: cn=ExampleSyncAgreement,cn=sync
> replica,cn=dc=example\,dc=com,cn=mapping tree,cn=config
>
> it should be cn=replica, not cn=sync replica - does it use the latter in
> the Admin Guide?
>
> changetype: add
> objectclass: top
> objectclass: nsDSWindowsReplicationAgreement
> cn: ExampleSyncAgreement
> nsds7WindowsReplicaSubtree: cn=Users,dc=ad1
> nsds7DirectoryReplicaSubtree: ou=People,dc=example,dc=com
>
> nsds7NewWinUserSyncEnabled: on
> nsds7NewWinGroupSyncEnabled: on
> nsds7WindowsDomain: ad1
> nsDS5ReplicaRoot: dc=example,dc=com
> nsDS5ReplicaHost: ad1.windows-server.com
> nsDS5ReplicaPort: 389
> nsDS5ReplicaBindDN: cn=sync user,cn=config
> nsDS5ReplicaBindCredentials: {DES}ffGad646dT0nnsT8nJOaMA==
> nsDS5ReplicaTransportInfo: TLS
> winSyncInterval: 1200
>
> On Fri, Jan 20, 2012 at 3:28 PM, Rich Megginson <rmeggins at redhat.com>wrote:
>
>> On 01/20/2012 01:08 PM, Jimmy wrote:
>>
>> That was it! I have passwords syncing, *BUT*(at the risk of sounding
>> stupid)-- is it not possible to also sync(add) the users from AD to DS?
>>
>> Yes, it is. Just configure IPA Windows Sync
>>
>> I created a new user in AD and it doesn't propogate to DS, just says:
>>
>> attempting to sync password for testuser3
>> searching for (ntuserdomainid=testuser3)
>> There are no entries that match: testuser3
>> deferring password change for testuser3
>>
>> On Fri, Jan 20, 2012 at 2:46 PM, Rich Megginson <rmeggins at redhat.com>wrote:
>>
>>> On 01/20/2012 12:46 PM, Jimmy wrote:
>>>
>>> Getting close here... Now I see this message in the sync log file:
>>>
>>> attempting to sync password for testuser
>>> searching for (ntuserdomainid=testuser)
>>> ldap error in queryusername
>>> 32: no such object
>>> deferring password change for testuser
>>>
>>> This usually means the search base is incorrect or not found. You can
>>> look at the 389 access log to see what it was using as the search criteria.
>>>
>>>
>>> On Fri, Jan 20, 2012 at 12:23 PM, Rich Megginson <rmeggins at redhat.com>wrote:
>>>
>>>> On 01/20/2012 10:23 AM, Jimmy wrote:
>>>>
>>>> You are correct. I had installed as an Enterprise root, but the doc I
>>>> was reading(original link) seemed to say that I had to do the certreq
>>>> manually, my bad. I think I'm getting closer I can establish an openssl
>>>> connection from DS to AD but I get these errors:
>>>>
>>>> openssl s_client -connect 192.168.201.150:636 -showcerts -CAfile
>>>> dsca.crt
>>>> CONNECTED(00000003)
>>>> depth=0 CN = csp-ad.cspad.pdh.csp
>>>> verify error:num=20:unable to get local issuer certificate
>>>> verify return:1
>>>> depth=0 CN = csp-ad.cspad.pdh.csp
>>>> verify error:num=27:certificate not trusted
>>>> verify return:1
>>>> depth=0 CN = csp-ad.cspad.pdh.csp
>>>> verify error:num=21:unable to verify the first certificate
>>>> verify return:1
>>>>
>>>> I thought I had imported the cert from AD but it doesn't seem so. I'm
>>>> still researching but if you guys have a suggestion let me know.
>>>>
>>>> Is dsca.crt the CA that issued the DS server cert? If so, that won't
>>>> work. You need the CA cert from the CA that issued the AD server cert
>>>> (i.e. the CA cert from the MS Enterprise Root CA).
>>>>
>>>> -J
>>>>
>>>> On Thu, Jan 19, 2012 at 5:04 PM, Rich Megginson <rmeggins at redhat.com>wrote:
>>>>
>>>>> On 01/19/2012 02:59 PM, Jimmy wrote:
>>>>>
>>>>> ok. I started from scratch this week on this and I think I've got the
>>>>> right doc and understand better where this is going. My problem now is that
>>>>> when configuring SSL on the AD server (step c in this url:
>>>>> http://docs.redhat.com/docs/en-US/Red_Hat_Directory_Server/8.2/html-single/Administration_Guide/index.html#Install_and_Configure_the_Password_Sync_Service )
>>>>>
>>>>> I get this error:
>>>>>
>>>>> certreq -submit request.req certnew.cer
>>>>> Active Directory Enrollment Policy
>>>>> {25DDA1E7-3A99-4893-BA32-9955AC9EAC42}
>>>>> ldap:
>>>>> RequestId: 3
>>>>> RequestId: "3"
>>>>> Certificate not issued (Denied) Denied by Policy Module 0x80094801,
>>>>> The request does not contain a certificate template extension or the
>>>>> CertificateTemplate request attribute.
>>>>> The request contains no certificate template information. 0x80094801
>>>>> (-2146875391)
>>>>> Certificate Request Processor: The request contains no certificate
>>>>> template information. 0x80094801 (-2146875391)
>>>>> Denied by Policy Module 0x80094801, The request does not contain a
>>>>> certificate template extension or the CertificateTemplate request attribute.
>>>>>
>>>>> The RH doc says to use the browser if an error occurs and IIS is
>>>>> running but I'm not running IIS. I researched that error but didn't find
>>>>> anything that helps with FreeIPA and passsync.
>>>>>
>>>>> Hmm - try installing Microsoft Certificate Authority in Enterprise
>>>>> Root CA mode - it will usually automatically create and install the AD
>>>>> server cert.
>>>>> http://directory.fedoraproject.org/wiki/Howto:WindowsSync
>>>>>
>>>>>
>>>>> Jimmy
>>>>>
>>>>> On Wed, Jan 11, 2012 at 3:32 PM, Rich Megginson <rmeggins at redhat.com>wrote:
>>>>>
>>>>>> On 01/11/2012 11:22 AM, Jimmy wrote:
>>>>>>
>>>>>> We need to be able to replicate user/pass between Windows 2008 AD and
>>>>>> FreeIPA.
>>>>>>
>>>>>>
>>>>>> That's what IPA Windows Sync is supposed to do.
>>>>>>
>>>>>>
>>>>>> I have followed many different documents and posted here about it and
>>>>>> from what I've read and procedures I've followed we are unable to
>>>>>> accomplish this.
>>>>>>
>>>>>>
>>>>>> What have you tried, and what problems have you run into?
>>>>>>
>>>>>> It doesn't need to be a full trust.
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>> On Tue, Jan 10, 2012 at 3:03 AM, Jan Zelený <jzeleny at redhat.com>wrote:
>>>>>>
>>>>>>> > Just wondering if there was anyone listening on the list that
>>>>>>> might be
>>>>>>> > available for little work integrating FreeIPA with Active Directory
>>>>>>> > (preferrably in the south east US.) I hope this isn't against the
>>>>>>> list
>>>>>>> > rules, I just thought one of you guys could help or point me in
>>>>>>> the right
>>>>>>> > direction.
>>>>>>>
>>>>>>> If you want some help, it is certainly not against list rules ;-)
>>>>>>> But in that
>>>>>>> case, it would be much better if you asked what exactly do you need.
>>>>>>>
>>>>>>> I'm not an AD expert, but a couple tips: If you are looking for
>>>>>>> cross-domain
>>>>>>> (cross-realm) trust, then you might be a bit disappointed, it is
>>>>>>> still in
>>>>>>> development, so it probably won't be 100% functional at this moment.
>>>>>>>
>>>>>>> If you are looking for something else, could you be a little more
>>>>>>> specific what
>>>>>>> it is?
>>>>>>>
>>>>>>> I also recommend starting with reading some doc:
>>>>>>> http://freeipa.org/page/DocumentationPortal
>>>>>>>
>>>>>>> Thanks
>>>>>>> Jan
>>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Freeipa-users mailing listFreeipa-users at redhat.comhttps://www.redhat.com/mailman/listinfo/freeipa-users
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://listman.redhat.com/archives/freeipa-users/attachments/20120123/cd3b002b/attachment.htm>
More information about the Freeipa-users
mailing list