[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

Re: [K12OSN] Tape drive....does it need an entry in fstab ?



EIDE tape drives are typically /dev/ht0 (IIRC).

Jeff


On Thu, 9 May 2002, John Meissen wrote:

>
> simpsond leopards k12 ar us said:
> > And how can I find out what /dev/? my tape drive . . .is?
> > I have never been able to make my tape driv work, either. . .
>
> Use 'dmesg' and look for lines like the following:
>
>  st: Version 20010812, bufsize 32768, wrt 30720, max init. bufs 4, s/g segs 16
>  Attached scsi tape st0 at scsi0, channel 0, id 2, lun 0
>
> Or look for /dev/st*
>
> Actaully, I've never seen tapes start at anything other than /dev/st0,
> but I've only worked with SCSI tapes.
>
> john-
>
>
>
>
> _______________________________________________
> K12OSN mailing list
> K12OSN redhat com
> https://listman.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
>
>





[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]