[K12OSN] Re: screen resolution on terminal clients

[Frank Samuelson]

Thank you, thank you, thank you.


Jim McQuillan wrote:
> Frank,
> 
> Try adding the following to your lts.conf file:
> 
> 
>     X_HORZSYNC  = "60-70"
> 
> 
> That worked for me, to get a 17" flat panel to do 1280x1024
> 
> Jim McQuillan
> jam at Ltsp.org
> 
> 
> 
> 
> On Fri, 12 Nov 2004, Frank Samuelson wrote:
> 
> 
>>Some of my terminals have lcd screens that look much better if run
>>at the intended resolution (1280x1024).  However, I can't get
>>my clients to run there.  They run at 1280x960
>>
>>I have added
>>
>>X_MODE_0 = 1280x1024 110 1280 1328 1512 1712  1024 1025 1028 1054 -hsync
>>-vsync
>>
>>and
>>
>>[00:11:25:0F:22:7F]
>>         XSERVER            = radeon
>>         X_MODE_0           = 1280x1024
>>
>>to my lts.conf file, and I get 1280x960 resolution, not 1280x1024.
>>
>>I looked through the etc/build_x4_cfg file and saw nothing that
>>would tip me off.  Is there anything in the
>>K12LTSP release 4.0.1-1 that would limit the resolution?
>>
>>It could be a problem w/ the XFree86 drivers I suppose.
>>
>>
>>Thanks for any help.
>>
>>-Frank
>>
>>
>>_______________________________________________
>>K12OSN mailing list
>>K12OSN at redhat.com
>>https://www.redhat.com/mailman/listinfo/k12osn
>>For more info see <http://www.k12os.org>
>>
> 
> _______________________________________________
> K12OSN mailing list
> K12OSN at redhat.com
> https://www.redhat.com/mailman/listinfo/k12osn
> For more info see <http://www.k12os.org>
>