[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]

RE: [K12OSN] Setting up new server



-----Original Message-----
From: k12osn-bounces redhat com [mailto:k12osn-bounces redhat com]On
Behalf Of Randall Swift
Sent: Thursday, October 07, 2004 7:35 AM
To: k12osn redhat com
Subject: [K12OSN] Setting up new server


I have a new server and when I try to install Fedora c2 it tells me that
no hard drives are detected and fails the installation. I have 2 scsi 73gb
hard drives. The controller is an adaptec dual ultra 320 scsi controller.
I have set up the drives using RAID0 and RAID1 and still the same error.
Any ideas?

Randy Swift
Network Administrator
Leavitt Area High School
Turner, Maine 04282
(207)225-3533
swift msad52 k12 me us

_______________________________________________
K12OSN mailing list
K12OSN redhat com
https://www.redhat.com/mailman/listinfo/k12osn
For more info see <http://www.k12os.org>

I had this happen to me this summer on an older dell with a raid controller.
I had to use the firmware, probably similar to the scsi bios utility, to set
up a logical drive before fc2 would find any drives. Of course, before that
I had to reseat the controller because it came out of the pci slot during
shipping. I would guess that there is one more step to your setup before the
os can recognize the drive.


[Date Prev][Date Next]   [Thread Prev][Thread Next]   [Thread Index] [Date Index] [Author Index]